Browse > Article
http://dx.doi.org/10.14775/ksmpe.2013.12.6.069

A Study on the Flow Control Forming Process and Experiment Device of Drum Clutch for Automatic Transmission  

Park, Jong-Nam (Dept. technology Planning defences Agency for Technology and Quality)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.12, no.6, 2013 , pp. 69-76 More about this Journal
Abstract
This paper presents the development of the FCF method for the manufacturing of final products using numbers related to the minimum amount of work. The utilized product is a drum clutch, which is part of the transmission of an automobile. A double acting press is secured first and a prediction of the forming load on the practical material is made through an experiment with a plasticine model. Also, a finite element simulation using product shape and properties is performed, as well as a press experiment. A double acting press is manufactured that is suitable for a double acting experiment with a conventional hydraulic press(200 tons). A peripheral device for the press is additionally designed for experimental purposes. And, the press has as its essential points the drive speed, stroke control, etc., all of which influence the forming and is modified. Especially, a laser system is used for velocity measurement of two punches. The forming load of a practical material is predicted in order to derive a forming load formula for cold conditions on the basis of approximate similarity theory. Finite element analysis of the relative velocity ratio(RVR), etc., for most suitable flow defect(unfilling, etc.) prevention is achieved as well. The results are verified through a press experiment.
Keywords
Flow Control Forming; Drum Clutch; Finite Element Analysis; Relative Velocity Ratio; Flow Defect;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Nakano, T., "Modern Applications of Complex Forming and Multi-action Forming in Cold Forging", J. of Materials Processing Technology, Vol. 46, pp. 201-226, 1994.   DOI   ScienceOn
2 T. Nakano, Using Method of Cold Forging through Sheet Forming, 素形材, pp. 13-16, 1996.
3 Nakano, T., "Muti-action Technique of Sheet Forming and Cold forging", Journal of the JSTP, Vol. 42, No. 484, pp. 388-392, 2001.
4 Osakada, K., Wang, X., and Hanami, S., "Forward-backward Extrusion with Axially Driven Container", Journal of the JSTP, Vol. 37, No. 430, pp. 1154-1179, 1996.
5 Maeda, A., Araki, K., "Forming Technique of Tooth Parts Using Sheet Material", Journal of the JSTP, Vol. 39, No. 445, pp. 106-110, 1998.
6 Imamura, Y., Takatsuji, N., Matsuki, K., Tokizawa, M., Murotani, K., and Maruyama, H., "Metal Flow Behavior of Wide Flat Bar by Spreading Extrusion: Study of Spreading Extrusion Process I", Journal of the JSTP, Vol. 39, No. 454, pp. 1150-1154, 1998.
7 Bae, W. B., Kim, Y. H., Kim, B. M., Park, J. W. and Choi, W. D., "Experimental Investigation on the Flow Control in Non-Axisymmetric Flat Die Extrusion - I", Journal of the KSME, pp. 674-679, 1996.
8 Park, J. N., Park, T. J., Kim, D. H. and Kim, B. M., "Experimental Investigation on the Flow Control in Forward-Backward Extrusion of Piston-Pin for Automobile", Journal of the JSTP, Vol. 26, No. 7, pp. 1366-1375, 2002.   과학기술학회마을   DOI   ScienceOn
9 "DEFORM-2D System User's Manual V4.1", Scientific Forming Technologies Corporation, 1995.
10 Y. H., Kim, Bae, W. B., Kang, B. S., Park, J. W. and Lee, K. H., "Experimental Investigation on the Flow Control in Non-Axisymmetric Flat Die Extrusion -II", Journal of the KSME, pp. 680-686, 1996.
11 Ko, D. C., Kim, B. M., Oh. S. O., "process Sequence Design in Cold Forged Part of Hub", Journal of the KSME, Vol. 26, No. 7, pp. 3387-3397, 1996.