• Journal of Chest Surgery
• /
• v.18 no.2
• /
• pp.151-156
• /
• 1985

A clinical analysis was done on 50 cases of ventricular septal defect, operated from April 1981 to March 1984 at the department of Thoracic and Cardiovascular Surgery, School of Medicine, Keimyung University. Among 50 cases, 34 cases were males and 16 cases were females. Their age ranged from 1 to 26 years and the mean age was 9.7 years. The main symptoms at admission were frequent upper respiratory infection [50%], exertional dyspnea [42%] and palpitation [34%]. In anatomical classification by Kirklin, type I constituted 20%, type II 76%, type IV 4%. Associated congenital cardiac lesions were pulmonic stenosis [6 cases], patent foramen ovale [5 cases], aortic insufficiency [3 cases] and persistent left superior vena cava [1 case]. When a normal electrocardiogram pattern was present, Qp/Qs, Rp/Rs and pulmonary artery systolic pressure and Pp/Ps were relatively low. Among cases of above 1 cm2/M2 BSA in size of defect, Pp/Ps and pulmonary artery systolic pressure were increased than the cases of below 1 cm2/M2 BSA [P=0.01]. The postoperative right bundle branch block was occurred in 21 cases [75%] among 28 cases of right ventriculotomy approach. The operative mortality was 2% [1 case] among 50 cases and complication rate was 14% [7 cases].

• Journal of Korean Society for Quality Management
• /
• v.28 no.4
• /
• pp.1-15
• /
• 2000

Nowadays, consumers' consciousness on me quality are very diversified and their pattern is changing from the price-priority to me quality-priority. So they prefer good-quality products without defects. Therefore quality is a core competence. To compete with me facts, it is very important to keep me the quality competence. To do so, one way is to introduce 100ppm quality innovation system. Many corporates introducing 100ppm improved defect rations(not only process defect ratios but also product defect ratios). In these respects, this study focuses on the comparison and measurement of performance by the analysis of quality system between 100ppm corporates and non-100ppm corporates. Second, this focuses on the finding out core competence reinforcement factors according to the introducing of 100ppm quality system to improve the performance. Third, this focuses on the persuading to introduce the 100ppm quality system to the non-100ppm corporates. Last, this focuses on the playing on the role of guidance to improve QM efficiency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.1-5
• /
• 2001

STI(shallow trench isolation)-CMP(chemical mechanical polishing) process have been substituted for LOCOS(local oxidation of silicon) process to obtain global planarization in the below sub-0.5㎛ technology. However TI-CMP process, especially TI-CMP with RIE(reactive ion etching) etch back process, has some kinds of defect like nitride residue, torn oxide defect, etc. In this paper, we studied how to reduced torn oxide defects after STI-CMP with RIE etch back processed. Although torn oxide defects which can occur on trench area is not deep and not severe, torn oxide defects on moat area is not deep and not severe, torn oxide defects on moat area is sometimes very deep and makes the yield loss. Thus, we did test on pattern wafers which go through trench process, APECVD process, and RIE etch back process by using an IPEC 472 polisher, IC1000/SUVA4 PAD and KOH base slurry to reduce the number of torn defects and to study what is the origin of torn oxide defects.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.3
• /
• pp.18-23
• /
• 2006

The formation degree of sustain (ITO pattern) determines the quality of a PDP (Plasma Display Panel). Thus, in the present study, we attempt to detect 100% of the defects that are larger than $30{\mu}m$. Currently, the inspection method in the PDP manufacturing process is dependent upon the naked eye or a microscope in off-line mode. In this study, a prototype inspection system for PDP ITO patterned glass is developed. The developed system, which is based on a line-scan mechanism, obtains information on the defects and sorts the defects by type automatically. The developed inspection system adopts a multi-vision method using slit-beam formation for minimum inspection time and the detection algorithm is embodied in the detection ability. Characteristic defects such as pin holes, substances, and protrusions are extracted using the blob analysis method. Defects such as open, short, spots and others are distinguished by the line type inspection algorithm. It was experimentally verified that the developed inspection system can detect defects with reliability of up to 95% in about 60 seconds for the 42-inch PDP panel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.191-195
• /
• 2003

The formation degree of sustain (ITO pattern) decides quality of PDP (plasma display panel). For this reason. it makes efforts in search defects more than 30 ${\mu}{\textrm}{m}$. Now, the existing inspection process is dependent upon naked eye or SEM equipment in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP ITO glass. This system creates information that detects and sorts kind of defect automatically. Design ed inspection technology adopts line-scan method by slip-beam formation for the minimum of inspection time and image processing algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix which draws up an approach to geometry. A characteristic of area-shaped defects, as pin hole, substance, protrusion et al, are extracted from blob analysis method. Defects, as open, short, spots, et al, are distinguished by line type inspection algorithm. In experiment results, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.105-109
• /
• 2005

Perineal area is composed of compact structures of urogenital organs and anus requiring a more sophisticated selection of flap and reconstruction. For achieving better outcome then conventional flap surgery, we use the perineal perforator based island flap for its reconstruction. After locating the perforator by Doppler, the flaps were designed according to the defect or expected vaginal orifice. The flaps were elevated bilaterally as island pattern. Finally defect or neovagina was reconstructed with inconspicious linear scar hidden in the inguinal crease. Five cases were performed with the perineal perforator based island flap. There were 3 cases of vulvar cancer, 1 case of transsexualism, and 1 case of ambiguous genitalia because of congenital adrenal hyperplasia. Operative results were satisfactory with good contouring and less prominent donor scar, when they were compared with other flap reconstructions such as latissimus dorsi perforator flap, groin flap, gracilis myocutaneous flap etc. The perineal perforator based island flap is highly recommended with the advantages of easy flap elevation, good rotation arc, and appropriate flap thickness for contouring. Compared with other conventional flaps, it can be selected as a good option for moderate defect of perineal area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1725-1728
• /
• 2009

This research developed process control device and FGV pattern generating device essential for full gate visual inspection to improve process so that defect detection capability may be maximized in specified environment. The devices developed in this research, which can be swiftly replaced in case loss or error occurs, are anticipated to improve module yield as well as maintain tact loss near '0'. In addition, as a result of mounting H/W and S/W system to control detailed operation sequence in production line and executing performance check and verification, detection rates were 98.1% and 99.1% respectively for pixel defect by tact and line defect, and yield of the entire module process including gate and visual level test increased up to 98.3%.

• Archives of Craniofacial Surgery
• /
• v.22 no.6
• /
• pp.341-344
• /
• 2021

Reconstruction of submental defects is a challenge that needs to be approached carefully, since many important anatomical structures are located in this small space. Both aesthetic and functional outcomes should be considered during reconstruction. In this report, we describe a case where a superficial branch of the transverse cervical artery (STCA) perforator propeller flap was applied for coverage of the submental area. An 85-year-old woman presented with a 3-cm ovoid mass on her submental area. We covered the large submental defect with a STCA rotational flap in a 180° propeller pattern. The flap survived well without any complications at 1 year of followup. A STCA propeller flap is a useful surgical option in reconstruction for defect coverage of the submental area.

• Transactions of Materials Processing
• /
• v.32 no.5
• /
• pp.276-286
• /
• 2023

The field of sheet metal forming using press technology has become essential in modern mass production systems. Draw bead is often used to enhance formability. However, optimal draw bead design often requires excessive time and cost due to iterative experimentation and sometimes results in some defects. Given these challenges, there is a need to enhance formability by introducing segmented blank holders without draw beads. In this paper, the feasibility of a localized holding strategy using segmented blank holders is evaluated without the use of draw beads. The possibility for improving the formability was evaluated by utilizing a combination of the forming limit diagram and the wrinkle pattern-based defect indicators. Artificial neural networks were used for predicting defect indicators corresponding to arbitrary input holding forces and the NSGA-II optimization algorithm is used to find optimum blank holder forces yielding better defect indicators than the original process with drawbeads. Using optimum holding forces obtained from the proposed procedure, the stamping process with the segmented blank holders can yield better formability than the conventional process with drawbeads.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.30-36
• /
• 1997

In this study, the development of an aluminum forged piston was tried to substitute the cast piston, in which there were internal defects such as blow hole and shrink pipe. A gasoline engine piston was chosen as an example for developing the forged piston. Before aluminum forging, model, material (plasticine) test was carried out to investigate the forgeability and internal flow pattern of the forged piston at room temperature. From the result of model material test, an aluminum piston to be forged was redesigned. The aluminum pistion was forged in hot process. The quality of a forged piston was compared with that of a cast piston in the point of mechanical properties, internal defect and microstructure. It was proved that the forged piston was superior to the cast piston.