• 대한수학회지
• /
• 제41권2호
• /
• pp.345-368
• /
• 2004

A preconditioning algorithm is developed in this paper for the iterative solution of the linear system of equations resulting from the p-version boundary element approximation of the three dimensional integral equation with hypersingular operators. The preconditioner is derived by first making the nodal and side basis functions locally orthogonal to the element internal bases, and then by decoupling the nodal and side bases from the internal bases. Its implementation consists of solving a global problem on the wire-basket and a series of local problems defined on a single element. Moreover, the condition number of the preconditioned system is shown to be of order $O((1＋ln/p)^{7})$. This technique can be applied to discretization with triangular elements and with general basis functions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.665-667
• /
• 1999

An adaptive algorithm is presented for diagnosis of actuator faults. The concept of unknown input decoupling is combined with an adaptive observer, leading to an adaptive diagnostic observer, which has the robustness property in the presence of an unmeasurable term such as uncertainties. The observation error equation for the adaptive diagnostic observer does not depend on the effect of uncertainties and used to construct an adaptive diagnostic algorithm that provides the estimates of the gains of actuators, which can be obtained directly via the use of the augmented error technique. The simulation results indicate that the proposed algorithm is more realistic in the sense that better robustness properties can be assured without knowledge about uncertainties and is potentially useful in the development of a fault tolerant control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1041-1046
• /
• 1989

In this paper, we attempt to control induction motors with high power efficiency as well as high dynamic performance by utilizing the recently developed theories: singular perturbation technique and noninteracting feedback control. Our controller does not need the transformation between a d-q synchronously rotating frame and a x-y stator-fixed frame. It is computationally quite simple. Furthermore, it does not depend on the rotor resistance. To illuminate the practical significance of our results, we present simulation and experimental results as well as mathematical performance analysis.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1270-1277
• /
• 2008

A Haar wavelet based numerical method for solving singularly perturbed linear time invariant system is presented in this paper. The reduced pure slow and pure fast subsystems are obtained by decoupling the singularly perturbed system and differential matrix equations are converted into algebraic Sylvester matrix equations via Haar wavelet technique. The operational matrix of integration and its inverse matrix are utilized to reduce the computational time to the solution of algebraic matrix equations. Finally a numerical example is given to demonstrate the validity and applicability of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.445-445
• /
• 2000

This paper proposes the MIMO indirect adaptive fuzzy controller to control the two-link manipulators. The input-output linearization technique, equivalent control input plus integral term, augmented error model and recursive least square adaptive law are used fer the controller. The linear type of fuzzifier-defuzzifier fuzzy logic system used for nonlinear function makes easy to farm the error model and able to follow the adaptive system approach. Such that control approach, the control system is not required joint speed and accerelation measurement and easy to implement and tune. The simulation results showed that the proposed controller has good control performance, stability, very small tracking error, decoupling, fast convergence, robust to parameter variation and load.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.846-851
• /
• 2004

In this paper, a sliding mode control based on disturbance observer is proposed to attenuate disturbance responses in an active magnetic bearing system, which is subject to base motion. An algorithm for exactly decoupling the disturbance estimation dynamics from the sliding mode dynamics is developed. It is also shown that the proposed method preserves the robustness of the sliding mode and asymtotically achieves zero regulation error, in the presence of external disturbances and parametric uncertainties. The proposed control is applied to a 2-DOF active magnetic bearing system subject to base motion. The feasibility of the proposed technique is illustrated, and the results of an experimental demonstration are shown.

• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.27-37
• /
• 1996

This paper proposes the control algorithm for maximum efficiency drive of PWM inverter - induction motor system with high dynamic performance. If the induction motor is driven under light load with rated magnetizing current, the Iron loss is excessively large compared with the codder loss which results in doer motor efficiency. Maximum efficiency drive of an induction motor can be achieved by controlling the magnetizing current to satisfy the optimal ratio that leads the total motor loss to be a minimum value at a given speed. The proposed control algorithm essentially uses vector control technique and adopts voltage decoupling control strategy to prevent the degradation of dynamic performance due to reduced magnetizing current. To verify the proposed method, digital simulations and experiments are carried out for a squirrel-cage induction motor with the rating of 2.2[kW].

• 전력전자학회논문지
• /
• 제17권5호
• /
• pp.438-444
• /
• 2012

This paper deals with the active and reactive power control of Grid connected system. It was shown that active power and reactive power can be dependently controlled with two individually adaptable parameters. The two parameters are power angle and voltage magnitude. Transient state will occur with active or reactive power reference value variation. This paper presents a new control strategy for active and reactive power control of less interaction and improved transient response. The paper details the control technique by the mathematical and electrical network analysis of the methodology. The performance was verified through computer simulation using MATLAB Simulink and experiment.

• 한국정보과학회논문지:정보통신
• /
• 제32권4호
• /
• pp.495-507
• /
• 2005

인터넷에서 단대단 (end-to-end) 가용대역폭 측정은 분산된 응용 서비스, 단대단 QoS 보장 등에 유용하게 이용할 수 있다. 일반적으로 단대단 가용대역폭 측정에는 단일-홉 갭 모델에 기반한 패킷 트레인 (packet train) 전송을 통한 측정이 많이 사용되고 있다. 하지만 패킷 트레인의 출력 간격은 네트워크 망 구성과 경쟁 트래픽에 의해서 영향을 받으므로, 이 때 발생한 오차에 의해서 가용대역폭 측정에도 오차가 발생하게 된다. 본 논문에서는 기존의 방법들이 가지고 있는 연이은 (bach-to-back) 패킷 트레인을 전송하여 링크의 고정대역폭을 측정에 의한 부정확성을 해결하기 위해서 패킷 트레인의 초기 갭에 영향을 받지 않는 가용대역폭 측정 알고리즘을 제안한다 또한 빠른 측정을 위해서 패킷 트레인 전송 시 적절한 초기 간격을 예측하는 방법을 제안한다. 제안하는 방법의 성능을 검증하기 위해서 다양한 망구조에서 실험을 통해서 기존의 기법들과 비교하였다.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.39-49
• /
• 2003

본 논문에서는 먼저 델타연산자 접근법과 섭동기법을 소개하였다. 전자는 수치연산에 있어서 round-off error를 줄여주고 후자는 시스템을 빠른 종속시스템과 느린 종속시스템으로 분리하여 연산시간을 줄여준다. 항공기의 동력학은 종방향 혹은 횡방향 모두 장주기(Phugoid)와 단주기 운동을 동시에 보여준다. 여기서는 경비행기 Beaver의 횡방향 모델에 섬동기법과 델타접슨법을 적용하여 얻는 근사치 해를 정확한 해와 비교하였다. 그 겨로가 개루프 시스템의 경우는 단 한번의 iteration을 시행하여 얻은 근사치 해가 정확한 해와 일치했고, 페루프 시스템의 경우는 iteration없이도 근사치 값이 정확한 해와 일치하였다. 이로써 제안된 방법들의 적용이 항공기 동력학 및 제어에 있어서 매우 유효함이 검증되었다.