• 대한산업공학회지
• /
• 제23권1호
• /
• pp.1-22
• /
• 1997

Learning control refers to controllers that learn to improve their performance at executing a given task, based on experience performing this specific task. In a previous work, the authors presented a theory of indirect decentralized learning control based on use of indirect adaptive control concepts employing simultaneous identification and control. This paper extends these results to apply to the indirect repetitive control problem in which a periodic (i.e., repetitive) command is given to a control system. Decentralized indirect repetitive control algorithms are presented that have guaranteed convergence to zero tracking error under very general conditions. The original motivation of the repetitive control and learning control fields was learning in robots doing repetitive tasks such as on an assembly line. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the desired trajectory. Decentralized repetitive control is natural for this application because the feedback control for link rotations is normally implemented in a decentralized manner, treating each link as if it is independent of the other links.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.181-183
• /
• 1986

This paper describes the concept of ADS (Autonomous Decentralized System) and its application to FA (Factory Automation). The schemes of ADFAS (Autonomous Decentralized Factory Automation System) utilizing these concepts are presented.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권1호
• /
• pp.13-19
• /
• 2001

This paper deals with decentralized control scheme and its application to multi-machine power systems. Decentralized control scheme has several practical advantages, because power system has geographically distributed characteristics. In this paper, decentralized observer-based optimal Power System Stabilizer(PSS) and Thyristor-Controlled Series Capacitor(TCST) controller are designed and tested in WSCC 9 bus system with one TCSC installed. Simulation results show that the proposed decentralized controller has satisfactory performances comparable to the centralized controller. In addition, using modal analysis, this paper shows that the proposed decentralized controller significantly affects only one pair of eigenvalues which have high participation with each generator, while slightly affects other eigenvalues. This result indicates that the application of the decentralized control scheme to enhance power system dynamic stability via excitation control have potential advantages because each low-damped mode occurs dominantly by each decentralized subsystem.

• 한국환경보건학회지
• /
• 제39권5호
• /
• pp.474-481
• /
• 2013

Objectives: This study was conducted to investigate the application of microbial fuel cells (MFCs) to the wastewater treatment systems employed in the Living Building Challenge. Methods: I reviewed a range of information on decentralized wastewater treatment technologies such as composting toilets, constructed wetlands, recirculating biofilters, membrane bioreactors, and MFCs. Results: The Living Building Challenge is a set of standards to make buildings more eco-friendly using renewable resources and self-treating water systems. Although there are various decentralized wastewater treatment technologies available, MFCs have been considered an attractive future option for a decentralized system as used in the Living Building Challenge. MFCs can directly convert substrate energy to electricity with high conversion efficiency at ambient and even at low temperatures. MFCs do not require energy input for aeration if using open-air cathodes. Moreover, MFCs have the potential for widespread application in locations lacking water and electrical infrastructure Conclusions: This paper demonstrated the feasibility of MFCs as a novel decentralized wastewater treatment system employed in the Living Building Challenge.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1155-1164
• /
• 2008

Supervisory control theory, which was first proposed by Ramadge and Wonahm, is a well-suited control theory for the control of complex systems such as semiconductor manufacturing systems, automobile manufacturing systems, and chemical processes because these are better modeled by discrete event models than by differential or difference equation models at higher levels of abstraction. Moreover, decentralized supervisory control is an efficient method for large complex systems according to the divide-and-conquer principle. Decentralized supervisors cannot observe the events those of which occur only within the other supervisors. Therefore decentralized supervisors can be designed according to supervisory control theory under partial observation. This paper presents a solution and a design procedure of supervisory control problem (SCP) for the case of decentralized control and SCP under partial observation (SCPPO). We apply the proposed design procedure to an experimental CIM Testbed. And we compare and analyze the designed decentralized supervisors and partially observed supervisors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.336-340
• /
• 1996

This paper presents the development of a collocated capacitance sensor and its application to the decentralized PID controller design for 4-axis magnetic bearing system. The main feature of the sensor is that it is made of a compact printed circuit board (PCB) so that it can be built in to the actuator coil of the magnetic bearing unit. The signal processing unit has been also developed. Then, decentralized PED controller is designed using simplified rotor system model. Finally, the experimental results on the performance of the collocated sensor based decentralized PID controller for a magnetic bearing rotor system is presented.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.869-879
• /
• 1995

The new field of learning control develops controllers that learn to improve their performance at executing a given task, based on experience performing this task. The simplest forms of learning control are based on the same concept as integral control, but operating in the domain of the repetitions of the task. In the previous paper, I had studied the use of such controllers in a decentralized system, such as a robot with the controller for each link acting independently. The basic result of the paper is to show that stability of the learning controllers for all subsystems when the coupling between subsystems is turned off, assures stability of the decentralized learning in the coupled system, provided that the sample time in the digital learning controller is sufficiently short. In this paper, we present two examples. The first illustrates the effect of coupling between subsystems in the system dynamics, and the second studies the application of decentralized learning control to robot problems. The latter example illustrates the application of decentralized learning control to nonlinear systems, and also studies the effect of the coupling between subsystems introduced in the input matrix by the discretization of the system equations. The conclusion is that for sufficiently small learning gain, and sufficiently small sample time, the simple learning control law based on integral control applied to each robot axis will produce zero tracking error in spite o the dynamic coupling in the robot equations. Of course, the results of this paper have much more general application than just to the robotics tracking problem. Convergence in decentralized systems is seen to depend only on the input and output matrices, provided the sample time is suffiently small.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.73-78
• /
• 2004

The deep seabed mining system is generally composed of surface vessel, lifting system, buffer, flexible pipe and miner. The milling system is regarded as a large-scale system in which each subsystem is interconnected to other one. In order to control a large-scale system, a decentralized control approaches have been proposed recently. In this paper, as a basic study on application of decentralized control, firstly, the mining system is simplified modeled, where the lifting system and buffer is regarded as a spherical pendulum and tile flexible pipe is as a two-dimension linear spring. Based on the derived model, the system characteristics and the feasibility of decentralized control are analyzed.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.501-508
• /
• 2022

세계 디지털화의 흐름이 경제, 신원 인증, 물류 분야 등에서 블록체인 혹은 분산원장을 기반으로 한 탈중앙화 시스템 환경으로 변화하고 있다. 이에 맞추어 이내비게이션 서비스의 접근성에 있어서도 탈중앙화된 여러 해사 서비스 레지스트리(MSR)들로부터 공개 서비스를 검색할 수 있어야 한다는 요구사항이 도출되었다. 본 연구는 MSR 분산원장과 다수의 지역 MSR로 구성된 탈중앙화 MSR 환경을 기술하고, 이 환경에서 웹 브라우저 기반의 글로벌 이내비게이션 서비스를 검색할 수 있는 서비스 검색 시스템을 구현하였다. 동적으로 서비스 속성, 지역 정보, 자유 텍스트 검색 질의를 생성하여 MSR 분산원장에 등록된 검색 결과를 통해 유관 MSR과 서비스 접속 정보를 사용자에게 제공하는 탈중앙화 애플리케이션이다. 본 연구에선 구축된 탈중앙화 MSR 환경과 그 환경 내에서 서비스 검색을 수행하는 시스템을 실험하였고 이를 통해 가지는 장점 및 한계점에 대한 논의를 갖는다.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1720-1730
• /
• 2005

Automatic guided vehicle in the factory has an important role to advance the flexible manufacturing system. In this paper, we propose a novel object-transportation control algorithm of cooperative AGV systems to apply decentralized control to multiple AGV systems. Each AGV system is under nonholonomic constraints and conveys a common object-transportation in a horizontal plain. Moreover it is shown that cooperative robot systems ensure stability and the velocities of augmented systems convergence to a scaled multiple of each desired velocity field for cooperative AGV systems. Finally, the application of proposed virtual passivity-based decentralized control algorithm via system augmentation is applied to trace a circle. Finally, the simulation and experimental results for the object-transportation by two AGV systems illustrates the validity of the proposed virtual-passivity decentralized control algorithm.