• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.7
• /
• pp.14-21
• /
• 2001

In this paper, we designed and fabricated C-band bandpass filter using dielectric resonators. From waveguide cutoff frequency which applied the region between adjacent dielectric resonators, the height of cavity is determined. The cavity's diameter is determined to the twice of dielectric resonator? diameter considering the conductor loss. The resonant frequency of the DR cavity is calculated with non decaying mode analysis. Conventionally, cylindrical dielectric resonator is analysed by Cohn's model which use the decaying mode in the region between dielectric resonator wall and circular cavity wall, which is an approximated method. The external quality factor, $Q_{ex}$ has found with simulation result using Ansoft's Maxwell simulation tool. The designed filter using dielectric resonators with dielectric constant of 45 has the passband center at 5.065GHz. The bandpass filter using dielectric resonators has about 1dB insertion loss, 20MHz bandwidth and more than 30dB attenuation at $f_0+15MHz$.

• Communications for Statistical Applications and Methods
• /
• v.24 no.5
• /
• pp.443-455
• /
• 2017

In this paper, we study ARCH(${\infty}$) models with either geometrically decaying coefficients or hyperbolically decaying coefficients. Most popular autoregressive conditional heteroscedasticity (ARCH)-type models such as various modified generalized ARCH (GARCH) (p, q), fractionally integrated GARCH (FIGARCH), and hyperbolic GARCH (HYGARCH). can be expressed as one of these cases. Sufficient conditions for $L_2$-near-epoch dependent (NED) property to hold are established and the functional central limit theorems for ARCH(${\infty}$) models are proved.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1302-1308
• /
• 2006

The unsteady Hartmann flow of an electrically conducting, viscous, incompressible fluid bounded by two parallel non-conducting porous plates is studied with heat transfer taking the Hall effect into consideration. An external uniform magnetic field and a uniform suction and injection are applied perpendicular to the plates while the fluid motion is subjected to an exponential decaying pressure gradient. The two plates are kept at different but constant temperatures while the Joule and viscous dissipations are included in the energy equation. The effect of the ion slip and the uniform suction and injection on both the velocity and temperature distributions is examined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.655-662
• /
• 2003

A rigorous field analysis by the non-decaying mode and the contour graph method is presented for dielectric-rod loaded cylindrical cavity resonators. Resonant frequencies and the lowest order modes for this resonator are calculated. The mode charts are presented to design the resonators. TE mode(transverse electric or H mode, having no Ez), TM mode(transverse magnetic or I mode, having no ㎐) and HEM mode(hybrid electromagnetic mode, having non-zero Ez and ㎐) are analyzed in detail using non-decaying mode method. The mode charts are completed. The validity of the theory is confirmed by experiments. The results were on the whole satisfactory. Experimental measurements show excellent agrement with the numerical results. The average error of TE, TM, and HEM mode is about 0.20 %, 0.14 %, and 0.28 %, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.747-754
• /
• 2001

This paper describes measurement of relative permittivity of illite found in young-dong area. A measurement of relative permittivity of the illite was made using cylindrical cavity resonators with a moveable cap. A concentric dielectric-rod inserted the cylindrical cavity resonator and an exact field representation of non-decaying mode of the resonator are introduced for the measurement of relative permittivity. The exact electromagnetic fields in cylindrical cavity with a concentric dielectric rod is analysed. The relative permittivity of dielectric in the cavity is calculated by analyzing a characteristic equation. The characteristic equation is solved by using the ContourPlot graph of Mathematica. We know that the field representation of non-decaying mode is exact. As a result, the relative permittivity of dielectric materials was 7.820 for a sample with binder and 7.894 for a pure sample.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.43-46
• /
• 1975

In a chopper amplifier the input signal of the AC amplifier is a train of square-waves. In the rase of square-wave the operatiom of AC amplifier is much different from that of ordinary sinusoidal wave. In this paper for the purpose of contributing to the design of chopper amplifier destortions of waveforms in the amplifier were investigated. When the time constant of each stage is equal the waveform in each stave apppears as square wave whose top is exponentially decaying. And when each stave has different time constant the waveform in n-th stage is composed of n-square waves whose tops are exponentially decaying.

• Journal of Korean Society of Forest Science
• /
• v.22 no.1
• /
• pp.1-6
• /
• 1974

In order to improve decaying properties of the plywood the effectiveness of the Malenit treatment on the shear strength and decaying properties of the plywood has been investigated. The results are as follows. 1. No decrease of the shear strength of the plywood has shown despite of whether plywood treated with malenit right after plywood made or veneer treated with the same preservative prior to plywood manufactured. 2. The effectiveness of Malenit treatment on decaying property of the plywood has shown much greater than that of the untreated plywood and red pine sapwood. 3. Weight decreases of the test specimens due to the infection of the different fungi have seen in different ways. If fungi infected are all different in kinds, weight decreases of the specimens are different in it's degree due to the fungi.

• The Korean Journal of Mycology
• /
• v.42 no.1
• /
• pp.40-49
• /
• 2014

The mycelial growths of wood-decaying mushroom strains collected from Korean forests were investigated on solid media under different culture media and temperatures. Most of strains showed the higher mycelial growth on potato dextrose agar (PDA) than malt extract agar (MEA) or sabouraud dextrose agar (SDA) plates. Except for a few strains, they grew well on PDA at $25^{\circ}C$ and showed a poor growth at low temperature ($10^{\circ}C$) than high temperature ($30^{\circ}C$). All strains showed the carboxymethylcellulase (CM-cellulase) and laccase activities on solid media containing the specific substrates for two different enzymes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1360-1365
• /
• 2010

In this paper, we propose a distance relaying algorithm using a Discrete Fourier Transform (DFT)-based modified phasor estimation method to eliminate the adverse influence of exponentially decaying DC offsets. Most distance relays are based on estimating phasors of the voltage and current signals. A DFT is generally used to calculate the phasor of the fundamental frequency component in digital protective relays. However, the output of the DFT contains an error due to exponentially decaying DC offsets. For this reason, distance relays have a tendency to over-reach or under-reach in the presence of DC offset components in a fault current. Therefore, the decaying DC components should be taken into consideration when calculating the phasor of the fundamental frequency component of a relaying signal. The error due to DC offsets in a DFT is calculated and eliminated using the outputs of an even-sample-set DFT and an odd-sample-set DFT, so that the phasor of the fundamental component can be accurately estimated. The performance of the proposed algorithm is evaluated for a-phase to ground faults on a 345 kV, 50 km, simple overhead transmission line. The Electromagnetic Transient Program (EMTP) is used to generate fault signals. The evaluation results indicate that adopting the proposed algorithm in distance relays can effectively suppress the adverse influence of DC offsets.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.203_204
• /
• 2009

In this paper, we propose a Fourier transform-based modified phasor estimation method to eliminate the adverse influence of exponentially decaying DC offsets. Discrete Fourier Transform (DFT) is generally used to calculate the phasor of the fundamental frequency component in digital protective relays. However, the output of the DFT contains an error due to exponentially decaying DC offsets. Therefore, the decaying DC components should be taken into consideration when calculating the phasor of the fundamental frequency component of a relaying signal. In this paper, the error due to DC offsets in a DFT is calculated and eliminated using the outputs of quaternity DFT, so that the phasor of the fundamental component can be accurately estimated. The performance of the proposed algorithm is evaluated by using computer-simulated signals and EMTP-generated signals. A performance evaluation showed that the proposed algorithm was not affected by system and fault conditions. Thus, the proposed algorithm can effectively suppress the adverse influence of DC offsets in a relaying signal.