• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.93-93
• /
• 2022

최근 이상기후로 인하여 우리나라 산림에 태풍 및 국지성 호우가 빈번히 발생하고 있다. 이로 인해 사면재해가 많이 발생하고 있으며 그 중 호우로 인한 많은 양의 물과 함께 토석 및 부유물이 중력에 의해 경사면을 따라 흐름 형태를 보이는 토석류 재해는 속도가 매우 빠르고 파괴적이며 그 결과는 비참하기까지 하다. 더구나 인구밀도가 낮은 산지 계곡부 뿐만 아니라 도시지역에서도 토석류 재해가 빈번히 발생하며 국내 및 해외에서도 토석류에 의한 피해사례는 자주 볼 수 있다. 이러한 토석류 재해의 피해를 줄이고자 토석류의 유동성을 저감시키기 위한 대책구조물의 시공이 많이 이루어지고 있으며 최근에는 투과형 구조물 중 하나인 원통형 기둥구조물을 그룹 형태로의 시공하는 경우가 늘어나고 있다. 토석류와 대책구조물 간의 상호작용은 월류(overflow), 쳐오름(run-up), 역류(backwater) 등의 복잡한 흐름 거동을 보인다. 하지만 원통형 대책구조물에 대한연구가 많이 이루어져 있지 않고 대규모 실험 또한 비용이 많이 소요되고 실행하기도 어렵다. 이 연구는 오픈소스 소프트웨어인 OpenFOAM을 사용하여 원통형 대책구조물의 설치 조건에 따라 토석류 흐름에 미치는 영향을 분석하였다. 짧은 시간 내에 흐름이 발생하고 비뉴튼 유체 특성을 갖는 토석류의 유효전단응력이 난류전단응력에 비해 상당히 크므로 난류의 영향은 무시하였다. 계산된 수치모의의 결과를 같은 규모로 시행한 실험결과와 비교분석 및 검증하였다. 공학학적 문제에 적용 가능하도록 비교적 낮은 해상도의 계산 격자를 사용했지만 실험에서 보여지는 토석류의 흐름거동을 양호하게 재현했으며 원통형 대책구조물의 배치조건에 따라 토석류 선단부 유속의 감소 정도 및 시간에 따른 흐름깊이 변화를 분석할 수 있었다. 이 연구는 다양한 조건을 가지는 토석류 흐름을 해석하는데 유용하게 활용할 수 있으며, 추후 복잡한 실제지형 조건을 고려하는 연구를 통하여 적용성을 확보하고자 한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.92-92
• /
• 2022

산 사면의 지반이 붕괴되어 흙, 모래, 자갈 그리고 물 등이 혼합하여 유동하는 토석류는 예측과 대비가 어려운 자연재해 중 하나 이다. 특히, 강우로 인해 발생하는 토석류의 경우 매우 빠르게 유동하기 때문에 피해 예측이 제한적이다. 이러한 토석류가 도심지역 또는 마을주변에서 발생할 경우 많은 인명 및 재산 피해가 발생한다. 따라서 토석류의 유동을 최소화시키기 위해선 1차적으로 수치모형을 통한 전반적인 유동 및 피해 규모 예측이 이루어져야 하며, 이러한 분석을 바탕으로 사방댐과 같은 구조물의 효율적인 설계가 이루어져야 한다. 이에 수치모형을 통해 토석류의 유동을 분석하고자 하는 많은 연구가 진행된 바 있으며, 사방댐 설계 분석 또한 수치모형과 실험을 통해 연구된 바 있다. 선행연구들에 따르면, 1) 발생부로부터의 거리, 2) 토석류 에너지의 감소, 3) 침식-연행 작용, 4) 사방댐의 용량 등이 효율적인 사방댐 설계에 영향을 미친다고 분석된 바 있다. 하지만 위의 항목들에 대한 종합적인 비교분석은 미비한 실정이다. 따라서 본 연구에선 위에서 제시한 4가지의 항목들을 바탕으로 사방댐 설계에 중요한 요소를 평가하고 산정하고자 한다. 토석류의 유동과 사방댐을 모의분석하기 위해 Deb2D 수치모형을 활용하였으며, Voellmy 유변학적 모형과 침식-연행-퇴적 작용을 분석할 수 있는 알고리즘을 사용하여 토석류의 유동을 현실에 가깝게 모의하였다. 2011년 서울 우면산에서 발생한 산사태 유역들 중에서 래미안 아파트 유역과2019년 강원도 갈남리에서 발생한 산사태를 대상지구로 선정하였다. 연구 결과에 따르면 4가지 요소들 중에서 사방댐의 용량이 효율적인 사방댐 설계에 가장 주요한 요인으로 분석되었다.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.321-327
• /
• 2017

China is experiencing the urbanization at an unprecedented speed and scale in human history. The continuing growth of China's big cities, both in city land and population, has already led to great challenges in China's urban planning and construction activities, such as the continuous increase of construction and demolition (C&D) waste. Therefore, how to characterize cities' construction activities, particularly dynamically quantify the flows of building materials and construction debris, has become a pressing problem to alleviate the current shortage of resources and realize urban sustainable development. Accordingly, this study is designed to employ 4D-GIS (four dimensions-Geographic Information System) and Internet Plus to offer new approach for accurate but dynamic C&D waste management. The present study established a spatio-temporal pattern and material metabolism evolution model to characterize the geo-distribution of C&D waste by combing material flow analysis (MFA) and 4D-GIS. In addition, this study developed a mobile application (APP) for C&D waste trading and information management, which could be more effective for stakeholders to obtain useful information. Moreover, a cloud database was built in the APP to disclose the flows of C&D waste by the monitoring information from vehicles at regional level. To summarize, these findings could provide basic data and management methods for the supply and reverse supply of building materials. Meanwhile, the methodologies are practical to C&D waste management and beyond.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.54-55
• /
• 2015

Increase of impervious areas due to expansion of housing area, commercial and business building of urban is resulting in property change of stormwater runoff. Also, rapid urbanization and heavy rain due to climate change lead to urban flood and debris flow damage. In 2010 and 2011, Seoul had experienced shocking flooding damages by heavy rain. All these have led to increased interest in applying LID and decentralized rainwater management as a means of urban hydrologic cycle restoration and Natural Disaster Prevention such as flooding and so on. Urban development is a cause of expansion of impervious area. It reduces infiltration of rain water and may increase runoff volume from storms. Low Impact Development (LID) methods is to mimic the predevelopment site hydrology by using site design techniques that store, infiltrate, evaporate, detain runoff, and reduction flooding. Use of these techniques helps to reduce off-site runoff and ensure adequate groundwater recharge. The contents of this paper include a hydrologic analysis on a site and an evaluation of flooding reduction effect of LID practice facilities planned on the site. The region of this Case study is LID Rainwater Management Demonstration District in A-new town and P-new town, Korea. LID Practice facilities were designed on the area of rainwater management demonstration district in new town. We performed analysis of reduction effect about flood discharge. SWMM5 has been developed as a model to analyze the hydrologic impacts of LID facilities. For this study, we used weather data for around 38 years from January 1973 to August 2014 collected from the new town City Observatory near the district. Using the weather data, we performed continuous simulation of urban runoff in order to analyze impacts on the Stream from the development of the district and the installation of LID facilities. This is a new approach to stormwater management system which is different from existing end-of-pipe type management system. We suggest that LID should be discussed as a efficient method of urban disasters and climate change control in future land use, sewer and stormwater management planning.

• Restorative Dentistry and Endodontics
• /
• 제47권2호
• /
• pp.22.1-22.18
• /
• 2022

Objectives: This systematic review (register-osf.io/wg7ba) compared the efficacy and safety of rotary and reciprocating kinematics in the removal of filling material from curved root canals. Materials and Methods: Only in vitro studies evaluating both kinematics during retreatment were included. A systematic search (PubMed/MEDLINE, Scopus, and other databases, until January 2021), data extraction, and risk of bias analysis (Joanna Briggs Institute checklist) were performed. Efficacy in filling removal was the primary outcome. Results: The search resulted in 2,795 studies, of which 15 were included. Efficacy was measured in terms of the remaining filling material and the time required for this. Nine studies evaluated filling material removal, of which 7 found no significant differences between rotary and reciprocating kinematics. Regarding the time for filling removal, 5 studies showed no difference between both kinematics, 2 studies showed faster results with rotary systems, and other 2 showed the opposite. No significant differences were found in apical transportation, centering ability, instrument failure, dentin removed and extruded debris. A low risk of bias was observed. Conclusions: This review suggests that the choice of rotary or reciprocating kinematics does not influence the efficacy of filling removal from curved root canals. Further studies are needed to compare the kinematics safety in curved root canals.

• 우주기술과 응용
• /
• 제3권3호
• /
• pp.280-300
• /
• 2023

본 논문은 한국항공우주연구원에서 운영 중인 우주물체 충돌위험 관리시스템의 개발 및 운영 현황을 포함하고 있다. 현재 저궤도위성 6기, 정지궤도위성 3기에 대해 24시간 충돌위험을 모니터링하고 있으며, 필요 시 충돌회피기동을 통해 충돌위험을 완화하여 안전하고 안정적으로 운영하고 있다. 2007년 중국의 자국위성 요격실험 이후 본격적으로 우주물체와 운영위성 간 충돌위험을 모니터링하고 있으며, 신속하고 효율적으로 상황에 대처하기 위해 다양한 충돌위험 관리시스템을 개발해왔다. 본 논문에서는 2007년 이후 현재까지 개발된 우주물체 충돌위험 관리시스템에 대한 소개, 현재 지구주변의 인공우주물체 현황, 현재 운영 중인 시스템에 대해 기술하였으며, 나아가 앞으로의 전망과 향후 계획에 대해 소개하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권5호
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• 한국방재안전학회논문집
• /
• 제16권4호
• /
• pp.67-74
• /
• 2023

본 연구에서는 산지 지역의 개발 예정지에 대하여 산사태의 발생 위험성을 분석 하였다. 개발 예정지의 위치를 고려하여 사면에서의 위험성과 계류에서의 위험성을 구분하여 현장조사를 수행하였고, 산사태의 발생 위험성 평가 기준은 산림청고시 제2023-10호 산사태 발생 우려지역 조사 및 취약지역 지정 ‧ 관리 지침의 평가표를 이용하였다. 사면13개소와 계류 11개소에 대하여 각각 위험도를 평가한 결과 사면 2개소, 계류 2개소에서 위험한 것으로 조사되었다. 위험한곳으로 조사된 지역에 대하여 토석류 피해가 발생할 것으로 예상되어 수치시뮬레이션을 이용하여 토석류 확산 범위를 분석하였다. 예상되는 토석류는 유역 하부에 위치한 도로 및 건물에 영향이 있을 것으로 시뮬레이션되어, 피해를 최소화 하기 위한 재해방지시설이 필요할 것으로 판단하였다. 이러한 정보는 산지 개발을 수행하기 전 사전 재해영향성 검토에 활용될 수 있을 것으로 예상된다.

• Safety and Health at Work
• /
• 제15권1호
• /
• pp.87-95
• /
• 2024

Background: This study focuses on assessing occupational risk for the health hazards encountered during maintenance works (MW) in semiconductor fabrication (FAB) facilities. Objectives: The objectives of this study include: 1) identifying the primary health hazards during MW in semiconductor FAB facilities; 2) reviewing the methods used in evaluating the likelihood and severity of health hazards through occupational health risk assessment (OHRA); and 3) suggesting variables for the categorization of likelihood of exposures to health hazards and the severity of health effects associated with MW in FAB facilities. Methods: A literature review was undertaken on OHRA methodology and health hazards resulting from MW in FAB facilities. Based on this review, approaches for categorizing the exposure to health hazards and the severity of health effects related to MW were recommended. Results: Maintenance workers in FAB facilities face exposure to hazards such as debris, machinery entanglement, and airborne particles laden with various chemical components. The level of engineering and administrative control measures is suggested to assess the likelihood of simultaneous chemical and dust exposure. Qualitative key factors for mixed exposure estimation during MW include the presence of safe operational protocols, the use of air-jet machines, the presence and effectiveness of local exhaust ventilation system, chamber post-purge and cooling, and proper respirator use. Using the risk (R) and hazard (H) codes of the Globally Harmonized System alongside carcinogenic, mutagenic, or reprotoxic classifications aid in categorizing health effect severity for OHRA. Conclusion: Further research is needed to apply our proposed variables in OHRA for MW in FAB facilities and subsequently validate the findings.

• Clinical and Experimental Reproductive Medicine
• /
• 제50권4호
• /
• pp.270-276
• /
• 2023

Objective: This study investigated the clinical and laboratory factors associated with the presence of dysmorphic oocytes in intracytoplasmic sperm injection (ICSI) cycles. Methods: The study involved 200 ICSI cycles, performed from 2020 to 2021, that yielded at least one mature oocyte. Clinical characteristics and ovarian stimulation methods were compared between 68 cycles with at least one dysmorphic oocyte (the dysmorphic group) and 132 cycles with normal-form oocytes only (the non-dysmorphic group). Dysmorphic oocytes were characterized by dark cytoplasm, cytoplasmic granularity, cytoplasmic vacuoles, refractile bodies in the cytoplasm, smooth endoplasmic reticulum in the cytoplasm, an oval shape, an abnormal zona pellucida, a large perivitelline space, debris in the perivitelline space, or an abnormal polar body. Results: The ages of the women, indications for in vitro fertilization, serum anti-Müllerian hormone levels, and rates of current ovarian endometrioma were similar between the dysmorphic and non-dysmorphic groups. In both groups, the three ovarian stimulation regimens, two types of pituitary suppression, and total gonadotropin dose were employed similarly. However, the dual-trigger method was used more frequently in the dysmorphic group (67.6% vs. 50%, p=0.024). The dysmorphic group contained significantly more immature oocytes and exhibited significantly lower oocyte maturity (50% vs. 66.7%, p=0.001) than the non-dysmorphic cycles. Within the dysmorphic group, significantly lower oocyte maturity was found in the cycles using a dual-trigger, but not in those with a human chorionic gonadotropin trigger. Conclusion: ICSI cycles with dysmorphic oocytes are closely associated with reduced oocyte maturity. This association was observed exclusively in dual-trigger cycles.