• Journal of Microbiology and Biotechnology
• /
• 제10권1호
• /
• pp.35-42
• /
• 2000

Reaction characteristics of 4-methylcatechol 2,3-dioxygenase (4MC230) purified from Pseudomonas putida SU10 with a higher activity toward 4-methylcatechol than catechol or 3-cethylcatechol were studied by altering their physical and chemical properties. The enzyme exhibited a maximum activity at pH 7.5 and approximately 40% at pH 6.0 for 4-methylcatechol hydrolysis. The optimum temperature for the enzyme was around $35^{\circ}C$, since the enzyme was unstable at higher temperature. Acetone(10%) stabilized the 4MC230. The effects of solvent and other chemicals (inactivator or reactivator) for the reactivation of the 4MC230 were also investigated. Silver nitrate and hydrogen peroxid severely deactivated the enzyme and the deactivation by hydrogen peroxide severely deactivated the enzyme and the deactivation by hydrogen peroxide was mainly due to the oxidation of ferrous ion to ferric ion. Some solvents acted as an activator and protector for the enzyme from deactivation by hydrogen peroxide. Ascorbate, cysteine, or ferrous ion reactivated the deactivated enzyme by hydrogen peroxide. The addition of ferrous ion together with a reducing agent fully recovered the enzyme activity and increased its activity abut 2 times.

• 한국동물위생학회지
• /
• 제28권3호
• /
• pp.285-294
• /
• 2005

This study was conducted to investigate the extraction method for the determination of organochlorine, organophosphorus and synthetic pyrethroid pesticide residues in beef fat by gas chromatography-mass selective detector(GC-MSD). Twenty one pesticide residues in fat were determined using a simple and rapid procedure based on solid- phase extraction(SPE) clean-up cartridges with octadecyl $(C_{18})-bonded$ porous silica, florisil, $10\%$ deactivated florisil. a tandem $C_{18}$ and florisil and a tandem $C_{18}$ and $10\%$ deactivated florisil. Solvent-solvent extraction using acetonitrile was not satisfied to eliminate fat interference for pesticide residue analysis by GC-MSD, and the recoveries of the method in fat ranged from 16.2 to $57.3\%$ except DDT$(83.2\%)$. The recoveries of SPE methods using a tandem $C_{18}$ and Florisil was $59.6\~123.8\%$ except fenitrothion $(135.2\%)$. the SPE method was verified the satisfactory performance of pre-treatment for pesticide residues analysis in fat by GC-MSD. The efficiency of florisil deactivated with $10\%$ water has been not proved significantly on recoveries of pesticide residues in fat.

• 대한환경공학회지
• /
• 제30권1호
• /
• pp.54-60
• /
• 2008

본 연구에서는 오리멀젼 연소 발전소 SCR 설비의 최적 운전과 폐촉매의 재생 기술개발을 위해 기초가 되는 촉매의 피독정도와 원인을 촉매의 특성 분석 및 반응 시험을 통해 규명하였다. 시험 결과 비활성화된 촉매의 활성은 350$\sim$450$^{\circ}C$의 반응온도에서 약 5$\sim$10% 감소하였으며 SO$_2$의 산화율은 약 0.59% 증가하였다. 성분 분석 결과, 다량의 V, Mg, S 성분이 비활성화된 촉매에서 증가하였으며 이중 V 성분과 S 성분은 오리멀젼 연료 성분에 기인하고 Mg 성분은 V에 의한 SO$_2$의 SO$_3$로의 산화를 방지하기 위해 주입되는 MgO 성분에 기인한다. 촉매담체의 결정구조는 신촉매의 결정구조와 같은 anatase 형태의 결정구조를 유지하여 운전에 따른 촉매의 열적 소결현상은 관찰되지 않았다.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.104-112
• /
• 1998

In the previous study, the countermeasure for welding deformation of bracket tilt is through up through experimental inspection for total process including welding process. For completeness of systematic examination of parts having sensitivity on welding deformation, the comparison and feedback between the result through simulation of welding process and experimental data is needed. In other words, it is necessary to control welding deformation that construct the prediction system for welding deformation through comparison and tuning with experimental data. In the present study, the application of FEA on welding process of bracket tilt with susceptibility to deformation is made and deformation behavior through change of welding sequence is focused on. It is used to improve the exactness of deformation analysis that three dimensional analysis for moving heat source, activated and deactivated bead element, and volume heat flux etc.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.53-59
• /
• 2006

The paper highlights technical advances and introduces recent innovations such as smart curing laminating adhesives for flexible packaging with low migration rates of aromatic isocyanates and amines. Latent reactive one-part systems on the basis of surface deactivated solid isocyanates open up new dimensions for heat setting adhesives and waterborne PU dispersions. The new generation of Purmelt Micro Emission adhesives contains less than 0.1% of MDI monomer, thereby drastically reducing the emission of hazardous isocyanate vapors during processing and setting a significantly improved technical standard in occupational safety. Once again, polyurethane adhesives have demonstrated their unique ability to adapt to new process, product, safety and environmental requirements.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.17-23
• /
• 1999

This paper presents the characteristics of the gas flow in the engine cylinder under various intake flow conditins. The particle tracking velovimetry(PTV) was used to anlayze the gas flow pattern and flow field in the cylinder. Effects of tumble intensifying valve(TIV), swirl intensifying valve(SIV) and one-valve deactivated condition on in-cylinder flow patterns were compared with the baseline engine udner 600rpm motoring condition. In addtion, tumbel ration was estimated rwith results of in -cylinder flow fields. Base on experimental results, the tumble ration of in-cylinder flow field has the maximum value at the bottom dead center for the different four inlet conditions. In TIV condition, the tumble ration is 1.35 times larger than that of baseline engine and 1 intake valve deactivated condition is effective to improve in-cylinder swirl motion.

• 공업화학
• /
• 제17권5호
• /
• pp.490-497
• /
• 2006

$V_{2}O_{5}$/$TiO_{2}$계 선택적촉매환원법(SCR) 촉매는 $SO_{2}$가 존재하는 조건에서 $SO_{2}$의 산화 및 암모니아의 반응에 의해 형성된 황산암모늄염으로 인해 촉매는 비활성화될 수 있다. 본 연구에 의하면, $SO_{2}$에 의한 촉매의 비활성화는 $SO_{2}$의 흡착이후 $SO_{3}$로의 산화 정도에 의존한다. $SO_{2}$의 산화는 배가스 내의 산소 농도에 약하게 영향을 받으며 바나듐 함량에 영향을 받는다. 또한 미반응 암모니아 역시 황산암모늄염 형성의 원인이므로 SCR 반응에 있어서 암모니아 투입비율에 대한 영향을 도출하였다. 황산암모늄염에 의해 비활성화된 촉매가 낮은 SCR 활성을 갖는 이유를 촉매의 기공부피 변화에서 찾을 수 있다. 이러한 황산암모늄염의 분해 반응도출을 위해 TPD (Temperature Programmed Decomposition) 실험이 수행되었다.

• 대한환경공학회지
• /
• 제32권10호
• /
• pp.928-935
• /
• 2010

폐 목재 소각 보일러 배가스로부터 질소산화물을 저감하기 위하여 설치된 선택적촉매환원 공정의 시운전 중에 전단에 설치된 여과포의 일부 소실이 발생되었다. 여과포 소실에 따른 불완전 연소 가스는 2단으로 설치된 저온 탈질촉매 표면을 미연탄소로 침적시켜 촉매의 탈질 효율을 급격히 저감시켰다. 활성 저하의 원인 분석을 위하여 XRD, EDX, BET, TGA, SEM 등 다양한 특성 분석을 실시하였다. 재생 방법으로 산 세척, 초음파 수 세척, 공기 중 소성의 방법을 적용한 결과, 공기분위기에서 $450^{\circ}C$로 2시간 소성하는 것이 최적조건 임을 밝혀내었다. 재생된 촉매는 2 cm ${\times}$ 2 cm ${\times}$ 10 cm(촉매 무게 10 g) Honeycomb 촉매 시료를 이용하여 활성을 측정한 결과 사용 전 촉매와 동일한 수준의 활성인 $180^{\circ}C$에서 NOx저감 효율 100%를 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제16권3호
• /
• pp.414-422
• /
• 2006

Before applying PVA bio-beads to practical biological treatment of nitrate-containing wastewater, their characteristics were examined. PVA bio-beads could steadily produce nitrogen gas from nitrate for 28 batches with 0.04 ml/l/h of the maximum gas production rate; however, the maximum gas production rate dropped remarkably thereafter with apparent deformation of beads. Addition of 2.2% solution containing 1% casamino acid, 1% yeast extract, 0.1% mineral solution, and 0.1% vitamin solution to the culture medium resulted in not only recovery of activity of deactivated beads, but also a higher rate of gas production. Calculation of economic benefit for the use of bio-beads in a long-run operation indicated that reactivation of bio-beads by chemicals had economical advantages over packing new bio-beads in the system. The continuously stirred bioreactor exhibited a satisfactory performance at HRT of 20.0 h. With a 9.5 mg $NO_{3}^{-}N/l/h$ nitrate removal rate, nitrate could completely be removed without nitrite accumulation. The use of PVA bio-beads in nitrate removal appears very promising.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.517-525
• /
• 2011

In this study, the used DOCs, which could remove the air pollutants such as CO and HC in the exhaust gas from diesel vehicle, were remanufactured by various conditions. Their catalytic performances and characterization were also investigated. The remanufacturing process of the deactivated DOCs includes high temperature cleaning of incineration, ultrasonic cleaning for washing with acid/base solutions to remove deactivating materials deposited to the surface of the catalysts, and active component reimpregnation for reactivating catalytic activity of them. The catalytic performance tests of the remanufactured DOCs were carried out by the diesel engine dynamo systems and chassi dynamo systems in CVS-75 mode. All prepared catalysts were characterized by the optical microscopes, SEM, EDX, porosimeter and BET to investigate correlations between catalytic reactivity and surface characteristics of them. The remanufactured DOCs at various conditions showed the improved catalytic performances reaching to 90% of fresh DOC, which is attributed to remove the deactivating materials from the surface of the used DOC through the analysis of catalytic performance test and their characterization.