• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.3
• /
• pp.23-32
• /
• 2007

The H.264/AVC video coding standard uses rate distortion optimization (RDO) method to improve the compression performance in the intra prediction. The complexity and computational load are increased more than previous standard by using this method, even though this standard selects the best coding mode for the current macroblock. This paper proposes a fast intra mode decision algorithm for H.264/AVC encoder based on dominant edge direction (DED). To apply the idea, this algorithm uses the approximation of discrete cosine transform (DCT) coefficient. By detecting the DED, 3 modes instead of 9 modes are chosen for RDO calculation to decide the best mode in the $4{\times}4$ luma block. As for the $16{\times}16$ luma and $8{\times}8$ chroma block, instead of 4 modes, only 2 modes are searched. Experimental results show that the computation time of the proposed algorithm is decreased to about 72% of the full search method with negligible quality loss.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.624-634
• /
• 2011

Recently, the JCT-VC is developing the next generation video coding standard that is called HEVC. HEVC has adopted many coding technologies increasing coding efficiency. For chroma interpolation, DCT-based interpolation filter showing better performance than the linear filter in H.264/AVC was adopted in HEVC. In this paper, a combined filter that utilizes the FIR filter and the linear filter in H.264/AVC is proposed to increase coding efficiency. When the proposed method is compared with DCT-based interpolation filter, the experimental results for various sequences show that the average BD-rate improvements on chroma U and V components are 0.9% and 1.1%, respectively, in the high efficiency case of random access structure, those on U and V components are 1.1% and 1.1%, respectively, in the low complexity case of random access structure, those on U and V components are 0.9% and 1.4%, respectively, in the high efficiency case of low delay structure, and those on U and V components are 1.8% and 1.8%, respectively, in the low complexity case of low delay structure.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.112-119
• /
• 1999

TMN5 has been used to evaluate the performance of H.263, the ITU-T/LBC standard of moving picture coding. As DCT is used as transform coding methods in TMN5, blocking effect exists seriously in reconstruction picture at low bit rate. In this pater, DWT is substituted for DCT and adaptive quantizer is designed while the structure of TMN5 is maintained to be excellent in the transplantation of conventional system. It has shown that average PSNR is reduced by 0.35dB in luminance but increased by 2dB in chrominance comparing with that of TMN5. As block effect is reduced in reconstruction picture, the subjective picture quality is better than that of TMN5. Picture drop is, also, reduced because much more frames are transmitted at same bit rate.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.46-53
• /
• 1996

Adaptive LMS algorithm has been used in many application areas due to its low complexity. In this paper input signal is transformed into the subbands with arbitrary bandwidth. In each subbands the dynamic range can be reduced, so that the independent filtering in each subbands has faster convergence rate than the full band system. The DCT transform domain LMS adaptive filtering has the whitening effect of input signal at each bands. This leads the convergence rate to very high speed owing to the decrease of eigen value spread Finally, the filtered signals in each subbands are synthesized for the output signal to have full frequency components. In this procedure wavelet filter bank guarantees the perfect reconstruction of signal without any interspectra interference. In simulation for the case of speech signal added additive white gaussian noise, the suggested algorithm shows better performance than that of conventional NLMS algorithm at high SNR.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.59-65
• /
• 2011

Korea DMB Service is popularized, and is used by many users. But latest display devices compared to the DMB content resolution support higher resolution and a variety of video resampling technologies has been used. Generally, subjective video quality is determined by object recognition rate in video, and increased as the edge space between objects are more clear. An edge is the boundary between an object and the background, and indicates the boundary between overlapping objects. the predicted direction in intra prediction used in H.264/AVC has the similarity up to 80% for the edge information. In the study, we propose an effective up-sampling mothed using the edge information that is extracted for the relationship between the intra prediction data and the DCT coefficient data of H.264 video encoding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1558-1566
• /
• 1999

While high resolution images are required for various applications, aliased low-resolution images are only available due to the physical limitations of sensors. In this paper, we propose an algorithm to reconstruct a high resolution image from multiple aliased low-resolution images, which is based on the generalized multichannel deconvolution technique. The conventional approaches are based on the discrete Fourier transform (DFT) since the aliasing effect is easily analyzed in the frequency domain. However, the useful solution may not be available in many cases, i.e., the underdetermined cases or the insufficient subpixel information cases. In order to compensate for such ill-posedness, the generalized multichannel regularization was adopted in the spatial domain. Furthermore, the usage of the discrete cosine transform instead of the DFT leads to the computationally efficient reconstruction algorithm. The validity of the proposed algorithm is both theoretically and experimentally demonstrated in this paper. It is also shown that the effect of inaccurate motion information is reduced by regularization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.837-842
• /
• 2008

Any errors that are generated in the channels and networks distort the video quality and are propagated in both the spatial and temporal domains. In particular, header errors ran result in serious visual degradation of the output video encoding/decoding schemes that can make an error resilient compressed bit-stream in error prone environments, such as mobile networks. In this paper, we proposes an header error resilience method that consider the activity of macroblock in video bitstream syntex. The extract of header error repaetedly embeds the header parameters into the least significant bits(LSB) of the quantized DCT coefficients prior to VLC. Experimental results show that the proposed error resilience method restores good image quality despite the detected error on header parameters.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.1-10
• /
• 2011

While the broadband network and multimedia technologies have been developing, the commercial market of digital contents has also been widely spreading with recently starting IPTV. Generally, PC player can display digital contents obtained through middleware like a settop box and can only bring the informations about contents like CODEC, bitrate etc. useful for only experts. But general users want to know more optional informations like content's subject, description etc. So unlike previous PC player, we proposed a player system that can get inserted informations, namely EPG(Electronic Program Guide), without database after bringing contents to PC through settop box. In addition, we also proposed DCT(Discrete Cosine Transform) based blind watermark generating method to insert EPG informations. We can extract watermark without original image and insert robust watermark in proportion to coefficients in frequency domain. And we analyzed and parsed PSI data from MPEG-TS. So we could insert wanted information using watermark from EPG. And we composed UI by extracting EPG information from watermark interted contents. Finally we modularized whole system into the watermark insert/extract application and directshow filter based player. So we tried to design this system so that the general developer can do in a way that is easier and faster.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.566-571
• /
• 2012

Marginal and internal fit are very important factor for the clinical long-term success of fixed dental prostheses (FDPs). A variety of methods have been applied to the measuring marginal and internal fit of FDPs. The purpose of this study was to compare the marginal and internal fit of 2 different measuring methods silicone replica technique [SRT] and die cutting technique (DCT). SRT, the space between die and FDPs were filled with light-body silicone, then stabilized by medium-body silicone. DCT, the FDPs were cemented on definitive dies and embedded into epoxy. The silicone replicas and epoxies were sectioned mesio-distal and measured 4 locations (margin, rounded chamfer, axial, occlusal) and using a digital microscope at a magnification $\times$160. For the SRT the mean${\pm}$SDs fit (${\mu}m$) recorded were: margin $88.7{\pm}22.2$, rounded chamfer $90.6{\pm}25.0$, axial wall $61.5{\pm}21.8$, occlusal $134.9{\pm}30.8$. For the DCT the mean${\pm}$SDs fit (${\mu}m$) recorded were: margin $85.3{\pm}18.0$, rounded chamfer $85.4{\pm}24.7$, axial wall $62.0{\pm}21.3$, occlusal $131.7{\pm}30.5$. The mean${\pm}$SDs size (${\mu}m$) of SRT margin was $88.7{\pm}22.2$ and of DCT margin was $85.3{\pm}18.0$. There were no statistically significant difference (p<0.05) of the four parts between SRT and DCT. It is considered an appropriate case to use SRT at fit of FDPs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.33-46
• /
• 1996

Inthis paper, we investigate the compatible coding technique, which receives much interest ever since the introduction of HDTV. First, attempts have been made to analyze the theoretical transform coding gains for various hierarchical decomposition techniques, namely subband, pyramid and DCT-based decomposition techniques. It is shown that the spatical domain techniques proide higher transform coding gains than the DCT-based coding technique. Secondly, we compare the performance of these spatial domain techniques, in terms of the PSNR versus various rate allocations to each layer. Based on these analyses, it is believed that the pyramid decomposition is more appropriate for the compatible coding. Also in this paper, we propose a hybrid prediction pyramid coding technique, by combining the spatio-temporal prediction in MPEG-2[3] and the adaptive MC(Motion Compensation)[1]. In the proposed coding technigue, we also employ an adaptive DCT coefficient scanning technique to exploit the direction information of the 2nd-layer signal. Through computer simulations, the proposed hybrid prediction with adaptive scanning technuque shows the PSNR improvement, by about 0.46-1.78dB at low 1st-layer rate(about 0.1bpp) over the adaptive MC[1], and by about 0.33-0.63dB at high 1st-layer rate (about 0.32-0.43bpp) over the spatio-temporal prediction[3].