• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.233-240
• /
• 2001

This paper presents a time series prediction method using a fuzzy rule-based system. Extracting fuzzy rules by performing a simple one-pass operation on the training data is quite attractive because it is easy to understand, verify, and extend. The simplest method is probably to relate an estimate, x(n+k), with past data such as x(n), x(n-1), ..x(n-m), where k and m are prefixed positive integers. The relation is represented by fuzzy if-then rules, where the past data stand for premise part and the predicted value for consequence part. However, a serious problem of the method is that it cannot handle nonstationary data whose long-term mean is varying. To cope with this, a new training method is proposed, which utilizes the difference of consecutive data in a time series. In this paper, typical previous works relating time series prediction are briefly surveyed and a new method is proposed to overcome the difficulty of prediction nonstationary data. Finally, computer simulations are illustrated to show the improved results for various time series.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.429-436
• /
• 2018

The RCS value of maritime ship is indicator of ship's stealth performance and it should be particularly measured for navy ship to ensure survivability on the battlefield. In the design phase of the navy ship, a RCS prediction should be performed to reduce RCS value and achieve ROC(Required Operational Capability) of the ship through configuration control. In operational phase, the RCS value of the ship should be measured for verifying the designed value and obtaining tactical data to take action against enemy missile. During the measurement of RCS for the ship, ship motion can be affected by roll and pitch in accordance with sea state, which should be analyzed into threat elevation from view point of enemy missile. In this paper, we propose a method to measure and analyze RCS of ship in 3-dimensions using a ship motion measuring instrument and a fixed RCS measurement system. In order to verify the proposed method, we conducted a marine experiment using a test ship in sea environment and compared the measurement data with RCS prediction value which is carried by prediction SW($CornerStone^{TM}$) using CAD model of the ship.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.171-178
• /
• 2006

Value prediction of instruction issue width in superscalar processor is a technique to obtain performance gains by supplying earlier source values of its data dependent instructions using predicted value of a instruction. In this paper, the mean performance improvement by predictor as well as prediction accuracy and prediction rate are moaned and assessed by comparison and analysis of value predictor that instruction issue width(4,8,16) in parallel and run by predicting value, which is for performance improvements of ILP[4]. The experiment result show the superiority hight performance of 8-issue.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.9
• /
• pp.81-86
• /
• 2018

Software defect severity is very important in projects with limited historical data or new projects. But general software defect prediction is very difficult to collect the label information of the training set and cross-project defect prediction must have a lot of data. In this paper, an unclassified data set with defect severity is clustered according to the distribution ratio. And defect severity-based prediction model is proposed by way of labeling. Proposed model is applied CLAMI in JM1, PC4 with the least ambiguity of defect severity-based NASA dataset. And it is evaluated the value of ACC compared to original data. In this study experiment result, proposed model is improved JM1 0.15 (15%), PC4 0.12(12%) than existing defect severity-based prediction models.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.216-238
• /
• 2023

In intelligent transportation systems, traffic management is an important task. The accurate forecasting of traffic characteristics like flow, congestion, and density is still active research because of the non-linear nature and uncertainty of the spatiotemporal data. Inclement weather, such as rain and snow, and other special events such as holidays, accidents, and road closures have a significant impact on driving and the average speed of vehicles on the road, which lowers traffic capacity and causes congestion in a widespread manner. This work designs a model for multivariate short-term traffic congestion prediction using SLSTM_AE-BiLSTM. The proposed design consists of a Bidirectional Long Short Term Memory(BiLSTM) network to predict traffic flow value and a Convolutional Neural network (CNN) model for detecting the congestion status. This model uses spatial static temporal dynamic data. The stacked Long Short Term Memory Autoencoder (SLSTM AE) is used to encode the weather features into a reduced and more informative feature space. BiLSTM model is used to capture the features from the past and present traffic data simultaneously and also to identify the long-term dependencies. It uses the traffic data and encoded weather data to perform the traffic flow prediction. The CNN model is used to predict the recurring congestion status based on the predicted traffic flow value at a particular urban traffic network. In this work, a publicly available Caltrans PEMS dataset with traffic parameters is used. The proposed model generates the congestion prediction with an accuracy rate of 92.74% which is slightly better when compared with other deep learning models for congestion prediction.

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.67-73
• /
• 2014

We consider the mean value function for NHPP software reliability model and time series regression model in software failure data. We estimate parameters for the proposed models from two data sets. The values of SSE and MSE is presented from two data sets. We compare the predicted number of faults with the actual two data sets using the mean value function and regression curve.

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.224-234
• /
• 2023

We analyzed the major quality characteristics of red pepper powders from various regions and predicted these characteristics nondestructively using shortwave infrared hyperspectral imaging (HSI) technology. We conducted partial least squares regression analysis on 70% (n=71) of the acquired hyperspectral data of the red pepper powders to examine the major quality characteristics. R_c² values of ≥0.8 were obtained for the ASTA color value (0.9263) and capsaicinoid content (0.8310). The developed quality prediction model was validated using the remaining 30% (n=35) of the hyperspectral data; the highest accuracy was achieved for the ASTA color value (R_p²=0.8488), and similar validity levels were achieved for the capsaicinoid and moisture contents. To increase the accuracy of the quality prediction model, we conducted spectrum preprocessing using SNV, MSC, SG-1, and SG-2, and the model's accuracy was verified. The results indicated that the accuracy of the model was most significantly improved by the MSC method, and the prediction accuracy for the ASTA color value was the highest for all the spectrum preprocessing methods. Our findings suggest that the quality characteristics of red pepper powders, even powders that do not conform to specific variables such as particle size and moisture content, can be predicted via HSI.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.5
• /
• pp.1101-1101
• /
• 2013

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.2
• /
• pp.89-98
• /
• 2005

In this study, indoor VOCs concentration emitted from floor and furniture was measured after the installation of floor and furniture in a real residence. With the measured data, prediction method and predication equations for indoor concentration of each VOCs and BTEX were developed. The following conclusions were drawn from this study. First, according to the predicted results of concentration decrease of BTEX (benzene, toluene, ethylbenzene, m,p,o-xylene) after the installation of floor in a real residence, prediction equation can be expressed using exponential function. Second, in case of floor, more reliable prediction equation can be obtained by using cumulative value of indoor concentration than by using just hourly measured value directly. Indoor concentration of benzene can be expressed as $y=408.52(1­e^{-00031{\times}time})$ with $R^2$ of 0.94 which is significantly high value. Third, toluene showed the highest concentration in case of furniture installation indoors, and it needed the longest time for concentration decrease. However, other substances except toluene showed constant concentration throughout the measurement period. Fourth, in case of furniture installation indoors, prediction equation of toluene concentration decrease is estimated to be $y= 3616.3{\times}e^{(-0.1091{\times}time)}+513.96{\times}e^{(-0.0006{\times}time)}\;with\; R^2$ of 0.95 which is significantly high value.

• Korean Journal of Organic Agriculture
• /
• v.29 no.3
• /
• pp.317-332
• /
• 2021

This study estimated the predictive onion yield through Stepwise regression of big data and weather variables by onion growing season. The economic feasibility of onion observations using big data was analyzed using estimated predictive data. The social welfare effect was estimated through the model of Harberger's triangle using onion yield prediction with big data and it without big data. Predicted yield using big data showed a deviation of -9.0% to 4.2%. As a result of estimating the social welfare effect, the average annual value was 23.3 billion won. The average annual value of social welfare effects if big data was not used was measured at 22.4 billion won. Therefore, it was estimated that the difference between the social welfare effect when the prediction using big data was used and when it was not was about 950 million won. When these results are applied to items other than onion items, the effect will be greater. It is judged that it can be used as basic data to prove the justification of the agricultural observation project. However, since the simple Harberger's triangle theory has the limitation of oversimplifying reality, it is necessary to evaluate the economic value through various methods such as measuring the effect of agricultural observation under a more realistic rational expectation hypothesis in future studies.