• 제목/요약/키워드: data transmission

검색결과 6,333건 처리시간 0.032초

지역적 삽입 비트를 고정시킨 PVD 영상 스테가노그래피 (PVD Image Steganography with Locally-fixed Number of Embedding Bits)

  • 김재영;박한훈;박종일
    • 방송공학회논문지
    • /
    • 제22권3호
    • /
    • pp.350-365
    • /
    • 2017
  • 스테가노그래피는 수신자와 송신자간에 비밀 정보를 제 3자가 알아차리지 못하게 통신하는 기법으로 수천 년 전부터 군사적, 외교적 또는 사업적인 정보들의 전달을 위해서 발달해 왔다. 현대에 이르러서는 디지털 미디어와 통신의 발달로 스테가노그래피의 기법이 더욱 발달하게 되었다. 이 중 영상을 활용하는 스테가노그래피의 기법들은 픽셀에 삽입 비트의 양을 고정하는 LSB, 이웃한 픽셀 쌍의 값 차이를 활용한 PVD등이 있다. PVD 영상 스테가노그래피의 경우 이웃한 픽셀 쌍의 값의 차이와 설계한 range table에 따라서 삽입하는 비밀 정보량을 유동적으로 하여 많은 양의 정보를 삽입한다. 하지만 비밀 정보를 순서대로 삽입하기 때문에 특정 픽셀 쌍에서 삽입하는 정보량에 오류가 발생하면 그 이후의 정보들 모두 오류를 발생시킨다. 본 논문에서는 이러한 PVD의 특성이 갖는 오류나 외부 공격에 대한 취약점을 보완하고 비밀 정보를 추출 할 수 있는 방법을 제안한다. 실험의 방법은 다양한 잡음들을 스테고 영상에 삽입해서 삽입 된 비밀 정보를 비교하고 분석한다. 기존의 PVD는 잡음에 대해서 전혀 비밀 정보의 보존이 불가능하지만 제안된 지역적 삽입 비트 고정 PVD의 경우에는 스테고 영상의 부분적인 잡음에 대해서 비밀 정보를 강건하게 추출할 수 있음을 확인하였다.

시장비교우위지수를 이용한 부산항의 수출경쟁력 분석 (Export Competitiveness of Busan Port: Market Comparative Advantage Index)

  • 모수원;정홍영;이광배
    • 한국항만경제학회지
    • /
    • 제31권3호
    • /
    • pp.141-153
    • /
    • 2015
  • 부산항의 수출이 우리나라 항만의 수출에서 차지하는 비중은 계속해서 감소하고 있는데, 이와 같은 항만의 위상변화는 해당 항만의 주요 수출시장과 수출품목에서 그 원인을 찾아볼 수 있다. 본고는 중국에 대한 부산항의 주요 10개 수출품목의 경쟁력이 어떻게 변화할 것인가를 밝히기 위해 시장비교우위(Market Comparative Advantage: MCA)지수를 도출하여 변화하는 행태를 분석함과 동시에 MCA지수를 대 중국 수출비중과 중국의 수입비중으로 분해한다. 부산항의 수출경쟁력은 MCA지수가 하락한 HS8703 품목을 제외한 9개 품목에서 상승하나, 이 중 7개 품목에서 중국의 수입비중이 감소함을 보인다. 그런데 중국의 수입비중이 줄어든다는 것은 시장비교우위지수가 상승하여도 수출증가를 낙관할 수 없다는 것을 의미한다. 중국의 수입비중이 감소하는 7개 품목에서 5개 품목은 대중 수출비중이 상승하나 2개 품목에서는 대중 수출비중도 함께 하락하여 MCA의 상승에도 불구하고 수출전망이 어둡다는 것을 보인다. 결국 HS3920, HS8708, HS8703과 같은 3개 품목에서만 수출경쟁력 향상이 수출전망을 밝게 한다는 것을 밝힌다. HS8708 품목이 부산항의 대중 수출에서 1위를 차지하는 품목이라는 점은 부산항의 대중 수출에 긍정적인 요소가 될 수 있으나, 10개 품목 중 3개 품목에서만 수출전망이 밝다는 것은 부산항의 대중 수출에 대해 전반적인 검토가 있어야 한다는 것을 보인다.

3G 방송망에서의 효율적인 멀티미디어 전송을 위한 유틸리티 기반 하이브라드 에러 복구기법 (A Utility-Based Hybrid Error Recovery Scheme for Multimedia Transmission over 3G Cellular Broadcast Networks)

  • 강경태;조용진;조용우;조진성;신현식
    • 한국정보과학회논문지:정보통신
    • /
    • 제33권4호
    • /
    • pp.333-342
    • /
    • 2006
  • cdma2000 lxEV - DO 이동통신 시스템은 멀티미디어 데이타 전송에 대한 요구 증가를 수용하기 위하여 브로드캐스트와 멀티캐스트 서비스 (BCMCS)를 제공한다. 이러한 데이타 브로드캐스트 서비스를 제공하기 위해서는 무선 전송 채널의 특성 즉 유선에 비해서 에러 발생 빈도가 높고 신뢰성이 떨어진 다는 사실을 고려해야 한다. 따라서 전송 에러의 복구를 위해 MAC 계층에서 순방향 에러 교정 (FEC: Forward Error Correction)을 사용하며, BCMCS 에서는 순방향 에러 교정을 위해 리드-솔로몬 (Reed - Solomon) 코팅을 사용한다. 본 논문에서는 먼저 리드 솔로몬 코딩의 성능을 분석하였고, 그 결과 이 방식이 천천히 움직이는 모바일 노드에 대해 취약함을 확인하였다. 따라서 이러한 점을 해결하고 에러 복구 성능을 향상시켜서 MPEG-4 FGS 비디오의 재생 품질을 개선하기 위하여 리드-솔로몬 코딩과 재전송 방법을 혼용한 하이브리드 방식의 에러 복구 기법을 제안하였다. 이는 리드-솔로몬의 코딩 오버헤드를 줄이는 대신, 그 결과로 얻어진 전송 슬롯을 활용하는 방법이다. 이렇게 얻어진 전송 슬롯은 제한적이기 때문에 활용도가 큰 패킷을 우선적으로 재전송 할 필요가 있다. 이를 위해 유틸리티 함수를 제안하였으며, 함수 값은 각 모바일 노드의 에러 제어 블록 (ECB: Error Control Block)을 이용해서 계산할 수 있다. 또한 하이브리드 방식의 에러 복구 기법은 MPEG-4 FGS의 특정을 활용하며, 이를 통해 채널의 상태가 불리할 경우는 물론 그렇지 않은 경우에 대해서도 비디오의 평균 재생 품질을 크게 향상시킬 수 있다.

한국 청소년의 성희롱실태 및 유형에 관한 조사연구 (A Study on Actual Conditions and Patterns of Sexual Harassment in the Korean Adolescents)

  • 김영혜;이화자;정은순;김이순;문선화;정인경
    • 한국간호교육학회지
    • /
    • 제7권2호
    • /
    • pp.196-206
    • /
    • 2001
  • The purpose of this study was to identify Korean adolescents' sexual harassment conditions and patterns in schools as well as their psychological reactions when they are under sexual harassments or they committed sexual harassments. The subjects were 475 middle and high schoolers in Pusan and Gyeong Sang Nam-Do. The survey was executed from July 1 through Dec. 31, 2000. The collected data was analyzed by SPSS WIN 8.0 using percentage, mean. The results of this study were as follows: 1. the linguistic sexual harassment such as 'lewd jokes or dirty talks' was the major pattern(35.4%), The body touching such as 'kiss or embracing', 'internet transmission of pornography', 'sexual harassing of body characteristics', touching breast', 'grasping of hands or body touching', 'body touching in secret place', 'urging to sit in touch or on knees', 'exposing of special body areas', and 'showing pornography' followed in a row. 2. The eighteen point three percents of subjects had the experience to commit sexual harassment. The forty four point seven percent of above subjects committed it against their classmates. The first time to commit sexual harassment was their middle school period (38.4%). Their motives to commit it were as under: 'killing time'(48.8%), 'annoying', 'attracting attention from the other sex', 'expressing lovely emotions', 'urging of their friends', 'misunderstanding that the other partners felt good when they experienced sexual harassment, 'showing their strength' etc. their with committing harassments they felt as under ; 'joyful'(61.6%), 'funny,' 'desirous to try again', 'thrilling', 'breaking stress', very pleasant', 'exciting', 'regretful', 'guilty', and 'feeling fear' etc. 3. Twenty four point two percents of the population exposed to sexual harassments. The sexual harassers were almost their classmates (42.7%). And then unknown people', 'boy or girl friends and school staffs' followed in a row. The places where harassments happened were 'inside classroom'(69.8%), 'school bus and subway', 'outside school', etc. The feelings when experienced harassments were 'anger' (51.3%), 'hurting self-respect', 'embarrassing', 'rejection', 'insulting', 'shame', 'fear', 'dislike', 'anxiety', 'melancholy' etc. The reasons not to have consultations after sexual harassments were 'worrying to be well-known'(49.6%), 'believing not helpful enough', 'regarding simple mischief', 'trying to revenge directly', 'understanding their mistakes', 'worrying retaliation' etc.

  • PDF

멀티미디어 환경에서 효율적인 음성 전송을 위한 WATM MAC 프로토콜 (A WATM MAC Protocol for the Efficient Transmission of Voice Traffic in the Multimedia Environment)

  • 민구봉;최덕규;김종권
    • 한국통신학회논문지
    • /
    • 제25권1A호
    • /
    • pp.96-103
    • /
    • 2000
  • WATM(Wireless Asynchronous Transfer Mode) 네트워크에서 음성은 실시간 전송이 요구되는 주된 요소 중의 하나다. 본 논문에서는 멀티미디어 환경에서 음성 트래픽을 효율적으로 전송하기 위한 새로운 매체접근제어(MAC: Medium Access Control) 프로토콜을 설계하고 성능을 평가하여 기존의 MAC방식과 비교한다. 새로 제안한 프로토콜은 상향링크(uplink)의 예약 슬롯구간(request slot period)을 음성 예약 슬롯구간과 비실시간 데이터 예약 슬롯 구간으로 구분하고, 음성 트래픽에 대해서는 QoS(Quality of Service)를 보장할 수 있도록 프레임 크기에 따른 적절한 슬롯 할당함수를 제시하였다. 이때 MAC은 반복적으로 휴지(silent)상태가 된 음성 소스의 수에 비례하여 음성예약 슬롯을 동적으로 할당하고, 슬롯예약 시 데이터를 함께 보냄으로써 평균 접근지연시간을 줄일 수 있도록 한다. 시뮬레이션에 의한 성능분석결과는 제안한 MAC방법이 고정된 음성 예약슬롯을 가진 Slotted ALOHA 방법에 비하여 대역폭 사용효율이 높음을 보인다. 또한 음성 단말의 수가 변하는 동적 환경하에서도 일정한 QoS를 제공 할 수 있다. 이것은 모든 음성 단말에게 하나씩의 뭬\ulcorner슬롯을 할당하는 NC-PRMA(None Collision-Packet Reservation Multiple Access)프로토콜보다 향상된 성능을 가진다는 사실을 나타낸다.

  • PDF

Vector Network Analyzer를 이용한 Py 박막의 강자성공명연구 (Vector Network Analyzer Ferromagnetic Resonance Study of Py Thin Films)

  • 신용확;하승석;김덕호;유천열
    • 한국자기학회지
    • /
    • 제20권1호
    • /
    • pp.18-23
    • /
    • 2010
  • 본 연구에서는 벡터 네트워크 분석기(vector network analyzer; VNA)와 코플라나 전송선(coplanar waveguide; CPW)을 이용한 강자성 공명 측정 방법을 개발하기 위해 두께가 각각 10, 20, 40 nm인 $Ni_{81}Fe_{19}$(Permalloy; Py) 합금 박막을 증착하여 측정하였다. 유리기판 위에 패터닝 작업을 거쳐 CPW를 형성하고 제작된 CPW 위에 Py 박막을 직접 올려놓아 시료의 반사/투과계수인 S-파라미터를 측정하였다. 외부자기장을 0 Oe에서 490 Oe까지 변화 시키며 측정해본 결과 Py 박막의 공명주파수는 2.5 GHz에서 7 GHz 범위 내에서 나타났으며 외부자기장의 세기가 커짐에 따라 공명주파수도 증가함을 확인하였다. S-파라미터를 분석하여 나온 공명주파수와 반치폭을 이용하여 포화자화량과 길버트 감쇠 상수를 구한 결과 Py 박막 40 nm에서 길버트 감쇠 상수 값 0.0124($\pm$0.0008)를 구했고 이는 선행 연구되었던 일반적인 강자성 공명 측정값과 일치함을 볼 수 있었다. 또한 두께별 의존도를 조사해본 결과 두께가 작아질수록 S-파라미터의 세기가 작아지는 것을 확인 할 수 있었으며, 강자성공명 분석 결과에서 Py 박막의 두께가 10 nm에서 40 nm까지 증가할 때 유효 포화 자화가 7.205($\pm$0.013) kOe에서 7.840($\pm$0.014) kOe로 증가하는 것을 확인 할 수 있었다.

하절기 복사환경 관측을 통한 석재, 목재, 알루미늄 바닥재의 열특성 평가 (A Study of the Thermal Characteristics of Flooring Materials, Wood, Rock, Aluminum through Observation of its Radiant Environment in the Summer)

  • 최동호;이부용
    • 한국태양에너지학회 논문집
    • /
    • 제28권3호
    • /
    • pp.35-44
    • /
    • 2008
  • In this study, the experiment of the measuring of four different types of flooring materials' thermal characteristics was conducted and examined during the summer. The experimental materials were arranged on the existing slab of the roof, and then its thermal characteristics were examined from the point of view of thermal radiation analysis. The aim of this study is ultimately to draw the fundamental data for improvements in a building's thermal function and reduce the urban heat island phenomena through optimizing the thermal characteristics of the surface covering materials of a building. The results from this study are as follows; 1) Each experimental material's albedo was calculated as 0.83 on the aluminum panel, 0.40 on the rock block, 0.37 on the wood deck and 0.21 on the concrete. It shows that the concrete material, which has the lowest short wave reflective rate, absorbed the most radiation energy and the aluminium panel has absorbed the lowest radiation energy. 2) From the each experimental object's value of the long wave radiation, the concrete material measured the highest, at $628W/m^2$, and the aluminium panel measured the lowest at $412W/m^2$. Therefore, it verifies that the experimental objects' own radiation rate determines the amount of the long wave radiation. 3) The degree of energy absorbency of a building's surface covering materials is greatly influenced by its own albedo and radiation rate, Therefore, it needs to be considered for the improvements in a building's thermal function and reducing the urban heat island phenomena. 4) According to the evaluation result of the each experimental object's overall heat transmission screening function on the roof of a building, the wooden deck is proven to be an excellent material for excluding the outside temperature differences effectively with its characteristic of low heat capacity and conduction. Also its surface temperature on the roof slab and the temperature difference during the day were both measured at low.

KTX산천 귀선전류고조파가 일반선 TI-21형 AF궤도회로에 미치는 영향분석 (Effect Analysis of Classical Line TI-21 type Audio Frequency Track Circuit from KTX Sancheon Return Current Harmonics)

  • 최재식;김희식;박주훈;김범곤
    • 한국철도학회논문집
    • /
    • 제19권1호
    • /
    • pp.38-45
    • /
    • 2016
  • KTX산천 고속차량에서 사용하는 전력변환시스템은 전력전자기술, 고속 대용량 반도체소자 및 마이크로프로세서의 기술발달에 힘입어 높은 성능과 효율, 안전성, 에너지 소비측면에서 뛰어난 제어능력을 갖추게 되었다. 하지만 고속스위칭소자인 IGBT를 사용함에 따라 발생하는 고조파로 인해 전기차량은 물론 변전소, 신호시스템, 데이터전송 및 감시시스템 등 선로변 신호설비에 문제를 야기시켰다. 특히 전력변환장치의 정수배 부근 주파수에서 발생하는 귀선전류고조파의 영향으로 TI-21 무절연AF궤도회로가 부정 동작하는 사례가 발생되었다. 본 논문은 고속전기차량과 궤도회로간 귀선전류고조파 이동경로 분석을 위하여 실제 현장에서 측정 및 분석방법을 제시하였다. 이러한 분석결과는 향후 신규로 도입되는 고속전기차량, AF궤도회로, 공동접지망 설계 시 폭넓게 반영될 것으로 기대된다.

4G LTE 이동통신망에서의 시그널링 DoS 탐지 기술 (The Detection of Signaling Dos on 4G LTE Cellular Network)

  • 장웅;김세권;오주형;임채태
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.146-149
    • /
    • 2013
  • 최근 전세계적으로 이동통신 서비스는 4G로의 급격한 전환이 이루어지고 있다. 그러나 4G의 급격한 도입은 보안 위협에 따른 충분한 검토가 이루어지지 못한 채 진행되었기에 다양한 위협이 존재할 것으로 예상된다. 따라서 국외에서는 4G 망의 취약점 및 보안 위협에 대한 연구가 활발히 진행되고 있으나, 국내에서는 상대적으로 연구가 미진한 상황이다. 특히 4G 가입자가 급격히 증가한 국내 상황에서, 4G 망의 안정성 및 가용성을 저해하는 보안 위협은 다수의 사용자에게 치명적인 영향을 줄 수 있다. 4G 망을 안정적으로 보호하기 위해서는 모바일 망 특성에 대한 고려가 필요하다. 모바일망은 한정된 무선 자원을 가지고 있으며, 이를 효율적으로 관리하기 위하여 일정 시간 동안 사용이 없는 단말의 무선 자원을 해제하고, 다시 데이터를 송수신 할 때 무선 자원을 재할당한다. 무선 자원 할당 및 해제 과정에서는 다수의 시그널링 메시지가 발생한다. 본 논문에서는 악의적으로 무선 자원 할당 및 해제 과정을 반복하여 대량의 시그널링 메시지를 유발시킴으로써 무선 자원을 관리하는 모바일 망 장비의 안정성 및 가용성을 저해하는 시그널링 DoS 트래픽을 탐지하기 위한 기술을 제안한다.

  • PDF

The New X-ray Induced Electron Emission Spectrometer

  • Yu.N.Yuryev;Park, Hyun-Min;Lee, Hwack-Ju;Kim, Ju-Hwnag;Cho, Yang-Ku;K.Yu.Pogrebitsky
    • 한국결정학회:학술대회논문집
    • /
    • 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
    • /
    • pp.5-6
    • /
    • 2002
  • The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

  • PDF