• Journal of The Korean Association For Science Education
• /
• v.42 no.1
• /
• pp.77-96
• /
• 2022

This study investigated how collaborative reflection between novice secondary science teachers promoted the development of teaching professionalism. We intentionally selected research participants who shared sufficient rapport. Data were collected by videotaping the classes taught by participants, pre-talk, post-interviews and nine collaborative reflection processes. All data were transcribed and analyzed. Results indicated that all three teachers showed changes in teaching practice. Minyoung's practice involved a teacher-led lecture, but through collaborative reflection, she could create a learning environment to enhance students' power and ownership in her class. Emphasizing academic rigor, Soyoung used to teach content outside the scope of the curriculum, but through collaborative reflection, she became more considerate of students' understanding. Finally, in Jiyeon's classes inquiry activities and theoretical explanations were separated from each other. However, she repeated her efforts to improve her class after collaborative reflection, allowing students to construct explanations through activities. In this study, three factors that promoted the development of teachers' pedagogical content knowledge through collaborative reflection were identified. First, the different teaching orientations of the three teachers who participated in this study, promoted sharing of opinions through collaborative reflection. Second, reflection based on teaching practice enabled practical feedback on the class, which enhanced the development of teachers' pedagogical content knowledge. Third, the equal status and formation of rapport between the three teachers created an environment for productive reflection. These results suggest that future teacher education programs should target communities that can promote collaborative reflection based on teachers' teaching practice.

• Korean Journal of Radiology
• /
• v.22 no.12
• /
• pp.2094-2123
• /
• 2021

Incidental thyroid nodules are commonly detected on ultrasonography (US). This has contributed to the rapidly rising incidence of low-risk papillary thyroid carcinoma over the last 20 years. The appropriate diagnosis and management of these patients is based on the risk factors related to the patients as well as the thyroid nodules. The Korean Society of Thyroid Radiology (KSThR) published consensus recommendations for US-based management of thyroid nodules in 2011 and revised them in 2016. These guidelines have been used as the standard guidelines in Korea. However, recent advances in the diagnosis and management of thyroid nodules have necessitated the revision of the original recommendations. The task force of the KSThR has revised the Korean Thyroid Imaging Reporting and Data System and recommendations for US lexicon, biopsy criteria, US criteria of extrathyroidal extension, optimal thyroid computed tomography protocol, and US follow-up of thyroid nodules before and after biopsy. The biopsy criteria were revised to reduce unnecessary biopsies for benign nodules while maintaining an appropriate sensitivity for the detection of malignant tumors in small (1-2 cm) thyroid nodules. The goal of these recommendations is to provide the optimal scientific evidence and expert opinion consensus regarding US-based diagnosis and management of thyroid nodules.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.5
• /
• pp.25-33
• /
• 2011

This work proposes a skinny-type 10b 50MS/s 0.13um CMOS three-step pipeline ADC for CIS applications. Analog circuits for CIS applications commonly employ a high supply voltage to acquire a sufficiently acceptable dynamic range, while digital circuits use a low supply voltage to minimize power consumption. The proposed ADC converts analog signals in a wide-swing range to low voltage-based digital data using both of the two supply voltages. An op-amp sharing technique employed in residue amplifiers properly controls currents depending on the amplification mode of each pipeline stage, optimizes the performance of op-amps, and improves the power efficiency. In three FLASH ADCs, the number of input stages are reduced in half by the interpolation technique while each comparator consists of only a latch with low kick-back noise based on pull-down switches to separate the input nodes and output nodes. Reference circuits achieve a required settling time only with on-chip low-power drivers and digital correction logic has two kinds of level shifter depending on signal-voltage levels to be processed. The prototype ADC in a 0.13um CMOS to support 0.35um thick-gate-oxide transistors demonstrates the measured DNL and INL within 0.42LSB and 1.19LSB, respectively. The ADC shows a maximum SNDR of 55.4dB and a maximum SFDR of 68.7dB at 50MS/s, respectively. The ADC with an active die area of 0.53$mm^2$ consumes 15.6mW at 50MS/s with an analog voltage of 2.0V and two digital voltages of 2.8V ($=D_H$) and 1.2V ($=D_L$).

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.58-63
• /
• 2013

A taxonomic study was carried out to assess the phylogenetic characteristics of isolate JJM57 from marine red algae Laurencia sp. collected from intertidal zone in Jeju Island, South Korea. Comparative analysis of 16S rRNA gene sequence shows that this isolate belongs to the genus Oceanisphaera. It shows 98.02% and 97.7% sequence similarity with Oceanisphera litoralis DSM $15406^T$ and Oceanisphera donghaensis KCTC $12522^T$, respectively. Strain JJM57 is a Gram-negative, aerobic, moderately halophilic bacterium able to grow in different NaCl concentration ranges from 0.5 to 8.0% and at varying temperatures from 4 to $37^{\circ}C$. Sharing some of the physiological and biochemical properties with O. litoralis and O. donghaensis, JJM57 strain differs in the utilization of ethanol, proline, and alanine. The G+C contents of the strain JJM57 is 61.94 mol% and it is rich in $C_{16:1}$ ${\omega}7c$ and/or iso-$C_{15:0}$ 2-OH, $C_{16:0}$, and $C_{18:1}$ ${\omega}7c$ fatty acids. The DNA-DNA relatedness data separates the strain JJM57 from other species such as O. litoralis and O. donghaensis. On the basis of these polyphasic evidences, present study proposed that strain JJM57 (=KCTC 22371 =AM983543 =CCUG 60764) represents a novel bacterial species of Oceanisphaera.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.268-276
• /
• 2010

Earthquake Hazard Mitigation Law was activated into force on March 2009. By the law, the obligation to monitor the effect of earthquake on the facilities was extended to many organizations such as gas company and local governments. Based on the estimation of National Emergency Management Agency (NEMA), the number of free-surface acceleration stations would be expanded to more than 400. The advent of internet protocol and the more simplified operation have allowed the quick and easy installation of seismic stations. In addition, the dynamic range of seismic instruments has been continuously improved enough to evaluate damage intensity and to alert alarm directly for earthquake hazard mitigation. For direct visualization of damage intensity and area, Real Time Intensity COlor Mapping (RTICOM) is explained in detail. RTICOM would be used to retrieve the essential information for damage evaluation, Peak Ground Acceleration (PGA). Destructive earthquake damage is usually due to surface waves which just follow S wave. The peak amplitude of surface wave would be pre-estimated from the amplitude and frequency content of first arrival P wave. Earthquake Early Warning (EEW) system is conventionally defined to estimate local magnitude from P wave. The status of EEW is reviewed and the application of EEW to Odesan earthquake is exampled with ShakeMap in order to make clear its appearance. In the sense of rapidity, the earthquake announcement of Korea Meteorological Agency (KMA) might be dramatically improved by the adaption of EEW. In order to realize hazard mitigation, EEW should be applied to the local crucial facilities such as nuclear power plants and fragile semi-conduct plant. The distributed EEW is introduced with the application example of Uljin earthquake. Not only Nation-wide but also locally distributed EEW applications, all relevant information is needed to be shared in real time. The plan of extension of Korea Integrated Seismic System (KISS) is briefly explained in order to future cooperation of data sharing and utilization.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.237-269
• /
• 2016

Asia-Pacific Space Cooperation Organization (APSCO) is the only intergovernmental space cooperation organization in Asia. Since its establishment to date, eight countries have signed the convention and become member states. South Korea participated actively in the preparatory phase of creating the organization, and one conference organized by AP-MCSTA which is the predecessor of APSCO was held in South Korea. However, after the APSCO Convention was opened for signature in 2005 to date, South Korea does not ratify the Convention and become a member. The rapid development of space commercialization and privatization, as well as the fastest growing commercial space market in Asia, provides opportunities for Asian countries to cooperate with each other in relevant space fields. And to participate in the existing cooperation framework (e.g., the APSCO) by the Asian space countries (e.g., South Korea) could be a proper choice. Even if the essential cooperation in particular space fields is challenging, joint space programs among different Asian countries for dealing with the common events can be initiated at the first steps. Since APSCO has learned the successful legal arrangements from ESA, the legal measures established by its Convention are believed to be qualified to ensure the achievement of benefits of different member states. For example, the regulation of the "fair return" principle confirms that the return of interests from the relevant programs is in proportion to the member's investment in the programs. Moreover, the distinguish of basic and optional activities intends to authorize the freedom of the members to choose programs to participate. And for the voting procedure, the acceptance of the "consensus" by the Council is in favor of protecting the member's interest when making decisions. However, political factors that are potential to block the participation of South Korea in APSCO are difficult to be ignored. A recent event is an announcement of deploying THAAD by South Korea, which causes tension between South Korea and China. The cooperation between these two states in space activities will be influenced. A long-standing barrier is that China acts as a non-member of the main international export control mechanism, i.e., the MTCR. The U.S takes this fact as the main reason to prevent South Korea to cooperate with China in developing space programs. Although the political factors that will block the participation of South Korea in APSCO are not easy to removed shortly, legal measures can be taken to reduce the political influence. More specifically, APSCO is recommended to ensure the achievement of commercial interests of different cooperation programs by regulating precisely the implementation of the "fair return" principle. Furthermore, APSCO is also suggested to contribute to managing the common regional events by sharing satellite data. And it is anticipated that these measures can effectively response the requirements of the rapid development of space commercialization and the increasing common needs of Asia, thereby to provide a platform for the further cooperation. In addition, in order to directly reduce the political influence, two legal measures are necessary to be taken: Firstly, to clarify the rights and responsibilities of the host state (i.e., China) as providing assistance, coordination and services to the management of the Organization to release the worries of the other member states that the host state will control the Organization's activities. And secondly, to illustrate that the cooperation in APSCO is for the non-military purpose (a narrow sense of "peaceful purpose") to reduce the political concerns. Regional cooperation in Asia regarding space affairs is considered to be a general trend in the future, so if the participation of South Korea in APSCO can be finally proved to be feasible, there will be an opportunity to discuss the creation of a comprehensive institutionalized framework for space cooperation in Asia.

• Journal of The Korean Association For Science Education
• /
• v.34 no.8
• /
• pp.731-744
• /
• 2014

Extracting students' own culture and resources as main sources in science class, we begin a research to explore teaching and learning settings that are more responsive to adolescents. This study has been designed to explore the funds of knowledge that students bring into middle school science class. It also focused on the features of teaching and learning settings that stimulated the autonomous inflow of students' funds of knowledge as resources of science learning. Data from participant observations and in-depth interviews with 7th grade students were qualitatively analyzed based on grounded theory. We found that students' funds of knowledge were formed from their family life, neighbor communities, peer group, and pop culture. The funds of knowledge based on peer culture emerged as the most salient factor of students' enhanced participation and utterance. Common features of classes that stimulated the inflow of funds of knowledge were analyzed to be: (1) hybrid spaces for learning designed in advance: (2) sharing and enlargement of the funds of knowledge that has been brought into the class: and (3) common orientation of the community of practice for knowledge co-construction and shared outcomes. From these findings, this paper discussed the educational implications for promoting students' potential resources to actual sources of science class. It also discussed students' development of participation specifically among the generally marginalized students. Science classes based on the funds of knowledge of students offer an increased possibility of knowledge co-construction through the hybridized interactions of student's everyday lives and science knowledge and lead to more meaningful learning experiences.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.541-553
• /
• 2018

The purpose of this study is to explore the relationship between epistemic goals, epistemic considerations and complexity of reasoning of science high school students in an open inquiry and to explore the context on how open inquiry compares with the characteristics of an authentic scientific inquiry. Two teams were selected as focus groups and a case study was conducted. The findings are as follows: First, the contexts, such as 'sharing the value for the phenomenon understanding, reflection on the value of the research, task characteristics that require collaboration and consensus, and sufficient communication opportunities,' promote epistemic goals and considerations. On the other hand, contexts such as 'lack of opportunity for critical review of related literature and environmental constraints' lowered epistemic sides. Second, epistemic goals and considerations influenced the reasoning complexity. The goal of 'scientific sense making' led to reasoning that pose testable hypotheses based on students' own questions. The high justification considerations led to purposely focusing attention to the control designs and developing creative experimental know-how. The high audience considerations led to defending their findings through argumentation and suggesting future research. On the other hand, the goal of 'doing the lesson' and the low justification considerations led to reasoning that did not interpret the meaning of the data and did not control the limit of experiment. The low audience considerations led to reasoning that did not actively defend their findings and not suggest future research. The results of this study suggest that guidance should provide communication and critical review opportunities.

• Korean Security Journal
• /
• no.19
• /
• pp.105-138
• /
• 2009

This study's purpose is to present the improvement of effectiveness of security activity for international conference among Several Countries which can be held hereafter. On the basis of security activity problems originating in APEC that had been held in Busan in 2005. I made up questions three times to on the members of the police, military, fire figher and national intelligence service who had experienced in Busan APEC and recognition of possible problem and possibility of improvement on each item of questions was analyzed by Delphi Method. Also interviews with 4 security experts selected from each security agency were conducted to present improvement in each part of problem. The results obtained from the face to face interview with four experts of security-enforcement agency about the role and importance of site activity stage for international conference among several countries are as followings ; First, the system that experienced security-enforcement agents can be selected for the next national security event is needed, by data-basing the security-enforcement agents who were experienced in security event as man power management. Second, the middle-term plan for the introduction of high-tech equipment and joint inspection with relevant security agents are needed for the efficient explosive technical detection. Third, high-tech security equipment could be introduced through the international high-tech security equipment exhibition. Fourth, an anti-terrorism plan should be measured by sharing information through the cooperation with domestic and international intelligence agency. Fifth, public relations should be measured systematically by organization rather than agents' individual public relations. Sixth, political consideration to secure integrative coordination with other agency is needed for security activity, through normal cooperation with fire fighting related agency such as an electric, gas, elevator company. Seventh, a definite press guideline is needed for a convenient news coverage and safety during security event.