• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.18-24
• /
• 2016

To effectively utilize a flash and predict its effects on an infrared device, it is essential to know the infrared characteristics of the flash source. In this paper, a study of the IR characteristics of flash light sources is carried out. The IR characteristics of three flash sources, of which two are combustive and the other is explosive, are measured with an IR characteristic measurement system over the middle- and long-wavelength infrared ranges. From the measurements, the radiances over the two IR ranges and the radiative temperatures of the flashes are extracted. The IR radiance of flash A is found to be the strongest among the three, followed by those of sources C and B. It is also shown that the IR radiance of flash A is about 10 times stronger than that of flash B, even though these two sources are the same type of flash with the same powder. This means that the IR radiance intensity of a combustive flash source depends only on the amount of powder, not on the characteristics of the powder. From the measured radiance over MWIR and LWIR ranges for each flashes, the radiative temperatures of the flashes are extracted by fitting the measured data to blackbody radiance. The best-fit radiative temperatures (equivalent to black-body temperatures) of the three flash sources A, B, and C are 3300, 1120, and 1640 K respectively. From the radiance measurements and radiative temperatures of the three flash sources, it is shown that a combustive source radiates more IR energy than an explosive one; this mean, in turn, that the effects of a combustive flash on an IR device are more profound than those of an explosive flash source. The measured IR radiances and radiative temperatures of the flash sources in this study can be used to estimate the effects of flashes on various IR devices, and play a critical role for the modeling and simulation of the effects of a flash source on various IR devices.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.463-471
• /
• 2006

Electrical resistivity surveys were conducted at areas of abandoned landfills in Cheonan and Wonju. Geology and extent of leachate migration around the landfills were evaluated with collected resistivity data by 2-D and 3-D resistivity inverse modeling. The Cheonan landfill is located above the paddy fields and the resistivity survey lines were crossed to examine possible pollution at the paddy fields by leakage of the landfill leachate. In Wonju, the landfill and the downgradient paddy fields are divided by a concrete barrier wall. At the bottom of the landfill, there is a leachate settlement system, which has not been in operation. To evaluate leachate leakage into the paddy fields, a total of 4 survey lines were used. According to the resistivity survey results, the landfill leachate in Cheonan appeared to be restricted only within the interior of the landfill, not to migrate into the subsurface of the paddy fields. These results are well consistent with electrical conductivity values of groundwaters obtained from a periodic analysis of water qualities. In Wonju, however, it was inferred that the leachate emanating from the landfill migrated beneath the abandoned leachate settlement system and the leachate would reach the downgradient paddy fields. Low resistivity area was observed in the old reservoir area and it appeared to be derived from convergence of groundwater flows from the surrounding valley and the moist wet land. In addition, groundwater flow into the paddy fields occurs beneath the old reservoir embankment at depths of $7{\sim}8m$. This paper reports details of the resistivity surveys for the uncontrolled landfills.

• Korean Journal of Social Welfare
• /
• v.61 no.2
• /
• pp.325-348
• /
• 2009

This study intends to investigate the main and mediating effects which caregiving appraisal and positive reappraisal exert on quality of life (QOL) of primary family caregivers of cancer patient considering the relationship with social support. The processes of this study areas follows. First, the variables which research model were chosen on the basis of stress-appraisal-coping theory through reviews of the previous studies. Second, a survey was conducted upon 295 primary caregiver of patient with cancer at National Cancer Center. Collected data were analyzed by SPSS 12.0 and SEM (Structural Equation Modeling) method using AMOS 5.0. The summary of the result is as follows. First, the entire model including measurement and structural model shows sufficient fit index of CFI(.951), TLI(.940) and RMSEA(.062). Second, the results of analysis of direct effects among variables are as follows. The 'Social support' has statistically significant direct effect on the 'feeling of burden' and 'growth'. The 'feeling of burden' has statistically significant direct effect on the 'growth' and 'QOL-mental and physical'. The 'growth' has statistically significant direct effect on the 'QOL-mental'. Third, the results of analysis of mediating effects of the 'social support and QOL' and 'feeling of burden and QOL' are as follows. The effects of 'social support' on 'QOL-mental' are significantly mediated by the 'feeling of burden' and 'growth'. The effects of 'social support' on 'QOL-physical' are significantly mediated by the 'feeling of burden'. The effects of 'feeling of burden' on 'QOL-mental' are significantly mediated by 'growth'. Through this research, these implications in social work study and practice are found: (1) this study extended the scope of study in the caregiver's health area from negative sides into positive ones by using growth variables as positive reappraisalof caregiving in research model, which has not been tried on the Korean family caregivers of the cancer patient. (2) The effects of positive reappraisal on QOL-mental can provide a foundational necessity for social workers to help family caregivers find positive meaning in their caregiving experience. This approach of social work practice will improve QOL of family caregivers. (3) This study present a framework including social support, negative appraisal, positive reappraisal, and QOL variables available to social work practice and explaining affective relationships among these variables in various aspects.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.131-145
• /
• 2010

The framework for making a coordinated decision for large-scale facilities has become an important issue in supply chain(SC) management research. The competitive business environment requires companies to continuously search for the ways to achieve high efficiency and lower operational costs. In the areas of production/distribution planning, many researchers and practitioners have developedand evaluated the deterministic models to coordinate important and interrelated logistic decisions such as capacity management, inventory allocation, and vehicle routing. They initially have investigated the various process of SC separately and later become more interested in such problems encompassing the whole SC system. The accurate quotation of ATP(Available-To-Promise) plays a very important role in enhancing customer satisfaction and fill rate maximization. The complexity for intelligent manufacturing system, which includes all the linkages among procurement, production, and distribution, makes the accurate quotation of ATP be a quite difficult job. In addition to, many researchers assumed ATP model with integer time. However, in industry practices, integer times are very rare and the model developed using integer times is therefore approximating the real system. Various alternative models for an ATP system with time lags have been developed and evaluated. In most cases, these models have assumed that the time lags are integer multiples of a unit time grid. However, integer time lags are very rare in practices, and therefore models developed using integer time lags only approximate real systems. The differences occurring by this approximation frequently result in significant accuracy degradations. To introduce the ATP model with time lags, we first introduce the dynamic production function. Hackman and Leachman's dynamic production function in initiated research directly related to the topic of this paper. They propose a modeling framework for a system with non-integer time lags and show how to apply the framework to a variety of systems including continues time series, manufacturing resource planning and critical path method. Their formulation requires no additional variables or constraints and is capable of representing real world systems more accurately. Previously, to cope with non-integer time lags, they usually model a concerned system either by rounding lags to the nearest integers or by subdividing the time grid to make the lags become integer multiples of the grid. But each approach has a critical weakness: the first approach underestimates, potentially leading to infeasibilities or overestimates lead times, potentially resulting in excessive work-inprocesses. The second approach drastically inflates the problem size. We consider an optimized ATP system with non-integer time lag in supply chain management. We focus on a worldwide headquarter, distribution centers, and manufacturing facilities are globally networked. We develop a mixed integer programming(MIP) model for ATP process, which has the definition of required data flow. The illustrative ATP module shows the proposed system is largely affected inSCM. The system we are concerned is composed of a multiple production facility with multiple products, multiple distribution centers and multiple customers. For the system, we consider an ATP scheduling and capacity allocationproblem. In this study, we proposed the model for the ATP system in SCM using the dynamic production function considering the non-integer time lags. The model is developed under the framework suitable for the non-integer lags and, therefore, is more accurate than the models we usually encounter. We developed intelligent ATP System for this model using genetic algorithm. We focus on a capacitated production planning and capacity allocation problem, develop a mixed integer programming model, and propose an efficient heuristic procedure using an evolutionary system to solve it efficiently. This method makes it possible for the population to reach the approximate solution easily. Moreover, we designed and utilized a representation scheme that allows the proposed models to represent real variables. The proposed regeneration procedures, which evaluate each infeasible chromosome, makes the solutions converge to the optimum quickly.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.45-67
• /
• 2016

Given the recent development of smart devices, users are producing, sharing, and acquiring a variety of information via the Internet and social network services (SNSs). Because users tend to use multiple media simultaneously according to their goals and preferences, domestic SNS users use around 2.09 media concurrently on average. Since the information provided by such media is usually textually represented, recent studies have been actively conducting textual analysis in order to understand users more deeply. Earlier studies using textual analysis focused on analyzing a document's contents without substantive consideration of the diverse characteristics of the source medium. However, current studies argue that analytical and interpretive approaches should be applied differently according to the characteristics of a document's source. Documents can be classified into the following types: informative documents for delivering information, expressive documents for expressing emotions and aesthetics, operational documents for inducing the recipient's behavior, and audiovisual media documents for supplementing the above three functions through images and music. Further, documents can be classified according to their contents, which comprise facts, concepts, procedures, principles, rules, stories, opinions, and descriptions. Documents have unique characteristics according to the source media by which they are distributed. In terms of newspapers, only highly trained people tend to write articles for public dissemination. In contrast, with SNSs, various types of users can freely write any message and such messages are distributed in an unpredictable way. Again, in the case of newspapers, each article exists independently and does not tend to have any relation to other articles. However, messages (original tweets) on Twitter, for example, are highly organized and regularly duplicated and repeated through replies and retweets. There have been many studies focusing on the different characteristics between newspapers and SNSs. However, it is difficult to find a study that focuses on the difference between the two media from the perspective of supply and demand. We can regard the articles of newspapers as a kind of information supply, whereas messages on various SNSs represent a demand for information. By investigating traditional newspapers and SNSs from the perspective of supply and demand of information, we can explore and explain the information dilemma more clearly. For example, there may be superfluous issues that are heavily reported in newspaper articles despite the fact that users seldom have much interest in these issues. Such overproduced information is not only a waste of media resources but also makes it difficult to find valuable, in-demand information. Further, some issues that are covered by only a few newspapers may be of high interest to SNS users. To alleviate the deleterious effects of information asymmetries, it is necessary to analyze the supply and demand of each information source and, accordingly, provide information flexibly. Such an approach would allow the value of information to be explored and approximated on the basis of the supply-demand balance. Conceptually, this is very similar to the price of goods or services being determined by the supply-demand relationship. Adopting this concept, media companies could focus on the production of highly in-demand issues that are in short supply. In this study, we selected Internet news sites and Twitter as representative media for investigating information supply and demand, respectively. We present the notion of News Value Index (NVI), which evaluates the value of news information in terms of the magnitude of Twitter messages associated with it. In addition, we visualize the change of information value over time using the NVI. We conducted an analysis using 387,014 news articles and 31,674,795 Twitter messages. The analysis results revealed interesting patterns: most issues show lower NVI than average of the whole issue, whereas a few issues show steadily higher NVI than the average.

• The Journal of Information Systems
• /
• v.25 no.1
• /
• pp.1-23
• /
• 2016

Purpose Self-congruity deals with the effect of symbolic value-expressive attributes on consumer decision and behavior, which is the theoretical foundation of the "non-utilitarian destination positioning". Functional congruity refers to utilitarian evaluation of a product or service by consumers. In addition, recent years, social network services, especially mobile social network services have created many opportunities for e-WOM communication that enables consumers to share personal consumption related information anywhere at any time. Moreover, self-construal is a hot and popular topic that has been discussed in the field of modem psychology as well as in marketing area. This study aims to examine the moderating effect of self-construal on the relationship between self-congruity, functional congruity and tourists' positive electronic word of mouth (e-WOM). Design/methodology/approach In order to verify the hypotheses, we developed a questionnaire with 32 survey items. We measured all the items on a five-point Likert-type scale. We used Sojump.com to collect questionnaire and gathered 218 responses from whom have visited Korea before. After a pilot test, we analyzed the main survey data by using SPSS 20.0 and AMOS 18.0, and employed structural equation modeling to test the hypotheses. We first estimated the measurement model for its overall fit, reliability and validity through a confirmatory factor analysis and used common method bias test to make sure that whether measures are affected by common-method variance. Then we tested the hypotheses through the structural model and used regression analysis to measure moderating effect of self-construal. Findings The results reveal that the effect of self-congruity on tourists' positive e-WOM is stronger for tourists with an independent self-construal compared with those with interdependent self-construal. Moreover, it shows that the effect of functional congruity on tourists' positive e-WOM becomes salient when tourists' self-construal is primed to be interdependent rather than independent. We expect that the results of this study can provide important implications for academic and practical perspective.

• Journal of Korea Game Society
• /
• v.4 no.3
• /
• pp.11-20
• /
• 2004

Virtual reality that we have seen from the movies in 80's and 90's is hawing near based on the rapid progress of science together with a computer technology. Various virtual reality system developments (such as VRML, HMD FishTank, Wall Type, CAVE Type, and so on) and the advancement of those systems make for the embodiment of virtual reality that gives more sense of the real. Virtual reality is so immersive that makes people feel like they are in that environment and enable them to manipulate without experiencing the environment at first hand that is hard to experience in reality. Virtual reality can be applied to the spheres, such as education, high-level programming, remote control, surface exploration of the remote satellite, analysis of exploration data, scientific visualization, and so on. For some connote examples, there are training of a tank and an aeroplane operation, fumiture layout design, surgical operation practice, game, and so on. In these virtual reality systems, the actual operation of the human participant and virtual workspace are connected each other to the hardware that stimulates the five senses adequately to lend the sense of the immersion. There are still long way to go, however, before long it will be possible to have the same feeling in the virtual reality as human being can have by further study and effort. In this thesis, the basic definition, the general idea, and the kind of virtual reality were discussed. Especially, CAVE typed in reality that is highly immersive was analyzed in definition, and then the method of VR programming and modeling in the virtual reality system were suggested by showing the restoration process of Kyongbok Palace (as the content of the original form of the culture) that was made by KISTI(Korea Institute of Science and Technology Information) in 2003 through design process in virtual reality system. Through these processes, utilization of the immersive virtual reality system was discussed and how to take advantage of this CAVE typed virtual reality system at the moment was studied. In closing the problems that had been exposed in the process of the restoration of the cultural property were described and the utilization plan of the virtual reality system was suggested.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.273-280
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of international logistics strategies as a countermeasure in changes of international logistics environments. This region represents most severe competition among Mega hub ports in the world in terms of container cargo throughput at the onset of the 21 st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN. which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even compared with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjugn Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none have comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines. Moreover, through the comparative evaluation between major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korea ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently qualified in ASEAN.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.494-503
• /
• 2000

A 21-residue peptide corresponding to amino acids 84-104 of $p16^{INK4A}$, the tumor suppressor, has been synthesized and its structure was studied by Circular Dichroism, $^1H$ NMR spectroscopy and molecular modeling. A p16-derived peptide (84-104 amino acids) forming stable complex with CDK4 and CDK6 inhibits the ability of CDK4/6 to phosphorylate pRb in vitro, and blocks cell-cycle progression through G1/S phase as shown in the function of the full-length p16. Its NMR spectral data including NOEs, $^3J_{NH-H{\alpha}}$ coupling constants, $C_{\alpha}H$ chemical shift, the average amplitude of amide chemical shift oscillation and temperature coefficients indicate that the secondary structure of a p16-derived peptide is similar to that of the same region of full-length p16, which consists of helix-turn-helix structure. The 3-D distance geometry structure based on NOE-hased distance and torsion angle restraints is characterized by ${\gamma}$-turn conformation between residues $Gly^{89}-Leu^{91}$(${\varphi}_{i+1}=-79.8^{\circ}$, ${\varphi}_{i+1}=60.2^{\circ}$) as evidenced in a single crystal structure for the corresponding region of p18 or p19, but is undefined at both the N and C termini. This compact and rigid ${\gamma}$-turn region is considered to stabilize the structure of p16-derived peptide and serve as a site recognizing cyelin dependent kinase, and this well-defined ${\gamma}$-turn structure could be utilized for the design of anti-cancer drug candidates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6234-6241
• /
• 2014

The purpose of this study was to examine the status of medical staff stress and accommodating manners on the death of patients in a hospital setting for serving the basic information to develop a death education program of medical personnel from April 1 to April 30, 2014. A survey was performed on 353 medical personnel at K university hospital, located in Daejeon metropolitan city. Frequency analysis, chi-square test, and independent t-test were used to analyze the data. The results showed that 'to understand the value of the time and preparedness of a meaningful future' were the most important perspectives on the contents of death education (p<0.05), 'in order to change perceptions and attitudes toward death positively' was the most important reason why they required death education'(p<0.05), 'case-based teaching and problem-based learning' was the most effective way of death education (p<0.05), 'negative or hostile response of a patient's guardian to medical personnel' was the largest stress that medical personnel confront upon witnessing a death'(p<0.05). An understanding of the death of patients by medical personnel and an awareness of the need for death education will help improve the understanding of the patient, their guardian, and medical personnel themselves. The main findings will contribute to the development of a specific death education program on the medical personnel in a hospital setting.