• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.55-62
• /
• 2023

In this study, a chest deflection is predicted by introducing a deep learning technique with the results of the frontal impact of the USNCAP conducted for 110 car models from MY2018 to MY2020. The 120 data are divided into training data and test data, and the training data is divided into training data and validation data to determine the hyperparameters. In this process, the deceleration data of each vehicle is averaged in units of 10 ms from crash pulses measured up to 100 ms. The performance of the deep learning model is measured by the indices of the mean squared error and the mean absolute error on the test data. A DNN (Deep Neural Network) model can give different predictions for the same hyperparameter values at every run. Considering this, the mean and standard deviation of the MSE (Mean Squared Error) and the MAE (Mean Absolute Error) are calculated. In addition, the deep learning model performance according to the inclusion of CVW (Curb Vehicle Weight) is also reviewed.

• International Journal of Contents
• /
• v.13 no.4
• /
• pp.23-28
• /
• 2017

Of the total economic loss caused by disasters, 40% are due to floods and floods have a severe impact on human health and life. So, it is important to monitor the water level of a river and to issue a flood warning during unfavorable circumstances. In this paper, we propose a modified error function to improve a hydrological modeling using a multi-layer perceptron (MLP) neural network. When MLP's are trained to minimize the conventional mean-squared error function, the prediction performance is poor because MLP's are highly tunned to training data. Our goal is achieved by preventing overspecialization to training data, which is the main reason for performance degradation for rare or test data. Based on the modified error function, an MLP is trained to predict the water level with rainfall data at upper reaches. Through simulations to predict the water level of Nakdong River near a UNESCO World Heritage Site "Hahoe Village," we verified that the prediction performance of MLP with the modified error function is superior to that with the conventional mean-squared error function, especially maximum error of 40.85cm vs. 55.51cm.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.6
• /
• pp.1645-1651
• /
• 2016

A lot of data, particularly in the medical field, contain variables that have a measurement error such as blood pressure and body mass index. On the other hand, recently smoothing methods are often used to solve a complex scientific problem. In this paper, we study a Bayesian curve-fitting under functional measurement error model. Especially, we extend our previous model by incorporating covariates free of measurement error. In this paper, we consider penalized splines for non-linear pattern. We employ a hierarchical Bayesian framework based on Markov Chain Monte Carlo methodology for fitting the model and estimating parameters. For application we use the data from the fifth wave (2012) of the Korea National Health and Nutrition Examination Survey data, a national population-based data. To examine the convergence of MCMC sampling, potential scale reduction factors are used and we also confirm a model selection criteria to check the performance.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1201-1211
• /
• 2015

WSN acts as an effective tool for tracking the large scale environments. In such environment, the battery life of the sensor networks is limited due to collection of the data, usage of sensing, computation and communication. To resolve this, a mobile robot is presented to identify the data present in the partitioned sensor networks and passed onto the sink. In novel data collection algorithm, the performance of the data collecting operation is reduced because mobile robot can be used only within the limited range. To enhance the data collection in a changing environment, Non Linear Error Identifier (NLEI) algorithm has been developed and presented in this paper to configure the robot by means of error models which are non-linear. Experimental evaluation has been conducted to estimate the performance of the proposed NLEI and it has been observed that the proposed NLEI algorithm increases the error correction rate upto 42% and efficiency upto 60%.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.10
• /
• pp.571-576
• /
• 2003

XML Web Service based on internet can cause problems on transmission speed and data error. Also system analysis results simulated by several different research groups can hardly have reliability because of error data that come from improperly managed files. In order to solve this problems, algorithm sever using XML Web Service is shared on the internet so widely that various application programs based on basic analysis module with a united IO can be developed. And also XML Dataset DB is interacted with XML Web Service, which prevents propagation of error data. It causes to improve reliabilityon the load flow analysis result and solve the problems on data error or transmission speed that can possibly come from internet.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.736-745
• /
• 2002

In network delivery of compressed video, packets may be lost if the channel is unreliable like Internet. Such losses tend to of cur in burst like continuous bit-stream error. In this paper, we propose an effective error-concealment approach to which an error resilient video encoding approach is applied against burst errors and which reduces a complexity of error concealment at the decoder using data hiding. To improve the performance of error concealment, a temporal and spatial error resilient video encoding approach at encoder is developed to be robust against burst errors. For spatial area of error concealment, block shuffling scheme is introduced to isolate erroneous blocks caused by packet losses. For temporal area of error concealment, we embed parity bits in content data for motion vectors between intra frames or continuous inter frames and recovery loss packet with it at decoder after transmission While error concealment is performed on error blocks of video data at decoder, it is computationally costly to interpolate error video block using neighboring information. So, in this paper, a set of feature are extracted at the encoder and embedded imperceptibly into the original media. If some part of the media data is damaged during transmission, the embedded features can be extracted and used for recovery of lost data with bi-direction interpolation. The use of data hiding leads to reduced complexity at the decoder. Experimental results suggest that our approach can achieve a reasonable quality for packet loss up to 30% over a wide range of video materials.

• Ocean and Polar Research
• /
• v.30 no.2
• /
• pp.149-158
• /
• 2008

The characteristic analysis of the estimated population parameters, i.e., standard deviation and error bound of coastal pollutant concentrations (hereafter PC, i.e., COD, TN, and TP concentrations), was carried out by using environmental data with different sampling frequency in Lake Shihwa and Incheon coastal zone. The results clearly show that standard deviation of the PC increases as its mean value increases. The error bounds of the annual mean values based on seasonally measured DO concentrations and PC data in Incheon coastal zone were estimated as ranges 2.26 mg/l, $0.68{\sim}0.86\;mg/l$, $0.62{\sim}0.80\;mg/l$, and $0.074{\sim}0.082\;mg/l$, respectively. In terms of annual mean of the DO concentration and PC in Lake Shihwa, the error bounds based on monthly measured data from 1997 to 2003 were also estimated as ranges 4.0 mg/l, 3.0 mg/l, $0.5{\sim}1.0\;mg/l$, and 0.05 mg/l, respectively. The error bound on the basis of real-time monitoring data is $7{\sim}13%$ only as compared to that of monthly measured data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.1-13
• /
• 2020

There are several methods of peak-shaving, which reduces grid power demand, electricity bought from electricity utility, through lowering "demand spike" during On-Peak period. An optimization method using linear programming is proposed, which can be used to perform peak-shaving of grid power demand for grid-connected PV+ system. Proposed peak shaving method is based on the forecast data for electricity load and photovoltaic power generation. Results from proposed method are compared with those from On-Off and Real Time methods which do not need forecast data. The results also compared to those from ideal case, an optimization method which use measured data for forecast data, that is, error-free forecast data. To see the effects of forecast error 36 error scenarios are developed, which consider error types of forecast, nMAE (normalizes Mean Absolute Error) for photovoltaic power forecast and MAPE (Mean Absolute Percentage Error) for load demand forecast. And the effects of forecast error are investigated including critical error scenarios which provide worse results compared to those of other scenarios. It is shown that proposed peak shaving method are much better than On-Off and Real Time methods under almost all the scenario of forecast error. And it is also shown that the results from our method are not so bad compared to the ideal case using error-free forecast.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.96-102
• /
• 2012

Recently, interests about frame error reduction method, using multiple PCM data which are received at several ground stations, are increasing. Simple data merge method is already applied to data processing system at Naro Space Center and have been used in the first and the second flight test analysis of KSLV-I. This paper is focused on error reduction with error correcting merge algorithm and time-delayed data correction algorithm. Result of applying the proposed algorithms to the flight test data shows 1.32% improvement in error rate, compared to simple-data-merge method. It is considered that presented algorithms could be very useful in generating various telemetry merge data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1144-1148
• /
• 1996

This paper presents WMR modelling and path tracking algorithm using Inertial Navigation System. The error models of gyroscope and accelerometers in INS are derived by Gauss-Newton method which is nonlinear regression model. Then, to test availability of error model, we pursue the fitness diagnosis about probability characteristic for real data and estimated data. Performance of inertial sensor with error model and Kalman filter is pursued by comparing with one without them. The computer simulation shows that position error remarkably decrease when error compensation is applied.