• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1153-1166
• /
• 2011

Detecting misbehavior in vehicular ad-hoc networks is very important problem with wide range of implications including safety related and congestion avoidance applications. Most misbehavior detection schemes are concerned with detection of malicious nodes. In most situations, vehicles would send wrong information because of selfish reasons of their owners. Because of rational behavior, it is more important to detect false information than to identify misbehaving nodes. In this paper, we propose the variable precision rough sets based misbehavior detection scheme which detects false alert message and misbehaving nodes by observing their action after sending out the alert messages. In the proposed scheme, the alert information system, alert profile is constructed from valid actions of moving nodes in vehicular ad-hoc networks. Once a moving vehicle receives an alert message from another vehicle, it finds out the alert type from the alert message. When the vehicle later receives a beacon from alert raised vehicle after an elapse of time, then it computes the relative classification error by using variable precision rough sets from the alert information system. If the relative classification error is lager than the maximum allowable relative classification error of the alert type, the vehicle decides the message as false alert message. Th performance of the proposed scheme is evaluated as two metrics: correct ratio and incorrect ratio through a simulation.

• Atmosphere
• /
• v.26 no.4
• /
• pp.541-551
• /
• 2016

A real-time quality control algorithm for $PM_{10}$ concentration measured by Continuous Ambient Particulate Monitor (FH62C14, Thermo Fisher Scientific Inc.) has been developed. The quality control algorithm for $PM_{10}$ data consists of five main procedures. The first step is valid value check. The values should be within the acceptable range limit. Upper ($5,000{\mu}g\;m^{-3}$) and lower ($0{\mu}g\;m^{-3}$) values of instrument detectable limit have to be eliminated as being unrealistic. The second step is valid error check. Whenever unusual condition occurs, the instrument will save error code. Value having an error code is eliminated. The third step is persistence check. This step checks on a minimum required variability of data during a certain period. If the $PM_{10}$ data do not vary over the past 60 minutes by more than the specific limit ($0{\mu}g\;m^{-3}$) then the current 5-minute value fails the check. The fourth step is time continuity check, which is checked to eliminate gross outlier. The last step is spike check. The spikes in the time series are checked. The outlier detection is based on the double-difference time series, using the median. Flags indicating normal and abnormal are added to the raw data after quality control procedure. The quality control algorithm is applied to $PM_{10}$ data for Asian dust and non-Asian dust case at Seoul site and dataset for the period 2013~2014 at 26 sites in Korea.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.19-32
• /
• 2023

The amount of radioactive waste is expected to dramatically increase with decommissioning of nuclear power plants such as Kori-1, the first nuclear power plant in South Korea. Accurate nuclide analysis is necessary to manage the radioactive wastes safely, but research on verification of radionuclide analysis has yet to be well established. This study aimed to develop the technology that can verify the results of radionuclide analysis based on artificial intelligence. In this study, we propose an anomaly detection algorithm for inspecting the analysis error of radionuclide. We used the data from 'Updated Scaling Factors in Low-Level Radwaste' (NP-5077) published by EPRI (Electric Power Research Institute), and resampling was performed using SMOTE (Synthetic Minority Oversampling Technique) algorithm to augment data. 149,676 augmented data with SMOTE algorithm was used to train the artificial neural networks (classification and anomaly detection networks). 324 NP-5077 report data verified the performance of networks. The anomaly detection algorithm of radionuclide analysis was divided into two modules that detect a case where radioactive waste was incorrectly classified or discriminate an abnormal data such as loss of data or incorrectly written data. The classification network was constructed using the fully connected layer, and the anomaly detection network was composed of the encoder and decoder. The latter was operated by loading the latent vector from the end layer of the classification network. This study conducted exploratory data analysis (i.e., statistics, histogram, correlation, covariance, PCA, k-mean clustering, DBSCAN). As a result of analyzing the data, it is complicated to distinguish the type of radioactive waste because data distribution overlapped each other. In spite of these complexities, our algorithm based on deep learning can distinguish abnormal data from normal data. Radionuclide analysis was verified using our anomaly detection algorithm, and meaningful results were obtained.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.799-802
• /
• 2003

In this paper a FPGA implementation of WEP protocol is described. IEEE 802.11 specifies a wired LAN equivalent data confidentiality algorithm. WEP(Wired Equivalent Privacy) is defined as protecting authorized users of a wireless LAN from casual eavesdropping. WEP use RC4 algorithm for data encryption and decryption, also it use CRC-32 algorithm for error detection. The WEP protocol is implemented using Xilinx VirtexE XCV1000E-6HQ240C FPGA chip with PCI bus interface.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1065-1071
• /
• 2005

Many techniques of leak detection in pipeline systems have developed based on the propagation wave speeds and wave attenuation. In this paper, the transient analysis methodology is used for calculating the wave speed in the plastic pipe and a frequency analysis methodology is developed for leakage detection in water pipe networks. Data acquisition system for pressurized pipeline system were designed md fabricated to obtain high frequency pressure data. The methodology properly handles the unavoidable uncertainties in measurement and modeling error. Based on information from head pressure test data, it provides leak prediction capability from the transient events with leakage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.12
• /
• pp.4776-4794
• /
• 2020

We propose a rapid adaptive learning framework for streaming object detection, called EER-ASSL. The method combines the expected error reduction (EER) dependent rollback learning and the active semi-supervised learning (ASSL) for a rapid adaptive CNN detector. Most CNN object detectors are built on the assumption of static data distribution. However, images are often noisy and biased, and the data distribution is imbalanced in a real world environment. The proposed method consists of collaborative sampling and EER-ASSL. The EER-ASSL utilizes the active learning (AL) and rollback based semi-supervised learning (SSL). The AL allows us to select more informative and representative samples measuring uncertainty and diversity. The SSL divides the selected streaming image samples into the bins and each bin repeatedly transfers the discriminative knowledge of the EER and CNN models to the next bin until convergence and incorporation with the EER rollback learning algorithm is achieved. The EER models provide a rapid short-term myopic adaptation and the CNN models an incremental long-term performance improvement. EER-ASSL can overcome noisy and biased labels in varying data distribution. Extensive experiments shows that EER-ASSL obtained 70.9 mAP compared to state-of-the-art technology such as Faster RCNN, SSD300, and YOLOv2.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.372-374
• /
• 2009

In this research, an obstacle avoidance method is proposed. The common usage of a robot is indoor and the obstacles to the indoor robot is studied. The accurate detection of direction after overcoming the obstacles is necessary for performance of autonomous navigation and mission project. The sensors such as Laser, Ultrasound, PSD can be used to measure the obstacles. In this research, a PSD sensor is used to detect obstacles. It detects the height and width of obstacles located on the floor. Before measuring the obstacles, a calibration of the sensor was done and it produced a better accuracy. We have plotted an error graph using data obtained from the repeated experiments. The graph is fitted to a polynomial curve. The polynomial equation is used for the robot navigation. And in this research, a model of the error of the direction of the robot after overcoming obstacles was obtained also. The prototype of the obstacle and the error of the direction after overcoming the obstacles are modelled using a neural networks. The input of the neural network composed with the height of the obstacles, the speed of robot, the direction of wheels and the error of the direction. To implement the suggested algorithm, we set up a robot which is operated by a notebook computer. Experiment showed the suggested algorithm performed well.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.394-400
• /
• 2002

In digital speech communications, the quality of service can be increased by speech coding scheme that is adaptive to the error rate of voice packet transmission. However, current communication protocol in cellular and internet communications does not provide the function that transmits the channel error information. To solute this problem, in this paper, new method for real-time transmission of channel error information is proposed, where channel error information is embedded in voice packet. The proposed method utilizes the pulse positions of codevector in ACELP speech codec, which results in little degradation in speech quality and low false alarm rate. The simulations with various speech data show that the proposed method meets the requirement in speech quality, detection rate, and false alarm rate.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.294-298
• /
• 2009

In this study, we proposes the method to improve the quality of the image through the edge extraction more delicately. Our method is named ESII(Edge Sensitive Image Interpolation) and doesn't use the fixed parameter of the interpolation kernel. However, it changes the parameter of pixel which is interpolated to the high definition image using the proper information from the surrounding pixels. It reconstructs the image by using the LSE(Least Square Error) and determining the pixel values to make the CME(Camera Modelling Error) minimized. Compared to the conventional methods, suggested method shows the higher quality of subjective and objective image definition and lessons the computational complexity by separating the image into 1-D data.