• 지역사회간호학회지
• /
• 제30권2호
• /
• pp.206-216
• /
• 2019

Purpose: This study is to investigate the low back pain, social support, impediment in daily living activities and to identify factors affecting impediment in elderly farmer' daily living activities. Methods: The participants were 128 elderly farmers who had received nerve block. Data were collected using a structured questionnaire from February to March, 2018. They were analyzed using t-test, ANOVA, pearson's correlation coefficient, and linear multiple regression. Results: The score of low back pain was $6.27{\pm}1.69$ (10 points), that of social support $2.92{\pm}0.76$ (1~5 points), and that of impediment in activity of daily living $2.01{\pm}0.82$ (0~5 points). Factors affecting impediment in activity of daily living were found to include age (p=.017), daily hours of farm work (p<.001), fear for the nerve block (p<.001), low back pain (p<.001), and social support (p<.001); the explanatory power of these variables was 58.8%. Conclusion: This study has found the controllable factors affecting impediment in activity of daily living among the rural elderly engaging in farm work include low back pain, social support, and daily farming hours. Therefore, to reduce impediment in activity of daily living among them, it is necessary to develop nursing interventions that can improve impediment in activity of daily living through reduction of daily farming hours using local resources. It is also desirable to improve their health status by reducing low back pain, and develop and apply social supports with health education programs that fit the local resources and the needs of the rural elderly.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.179-183
• /
• 2010

The safety accident is one of the formidable issues in construction field, and in order to prevent safety accident, contractors perform safety education, safety control document, meeting with labors, and safety instruction in construction phase. However, safety accident is occurred continuously, it is needed to analyze which factors are affected to safety accident. day of the week, daily construction cost, and daily work task were selected as those factors. The result in this research represented that those factors were not considered as an critical one in safety accident. Because of approach limitation to safety accident, only two case studies were collected. If more safety accident cases are gathered in future study, it will clarify the cause of safety accident and will prevent safety accident.

• 대한산업공학회지
• /
• 제41권3호
• /
• pp.275-286
• /
• 2015

In this paper, we propose a practical method for setting up a daily production plan which can operate semiconductor fabrication factories more stably and linearly by determining work in process (WIP) targets and movement targets. We first adjust cycle times of the operations to satisfy the monthly production plan. Second, work in process (WIP) targets are determined to control the production progress of operations: earliness and tardiness. Third, movement targets are determined to reduce cumulated differences between WIP targets and actual WIPs. Finally, the determined movement targets are modified through a simulation model which considers capacities of the equipments and allocations of the WIPs in the fab. The proposed daily production planning method can be easily adapted to the memory semiconductor fabs because the method is very simple and has straightforward logics. Although the proposed method is simple and straightforward, the power of the method is very strong. Results from the shop floor in past few periods showed that the proposed methodology gives a good performance with respect to the productivity, workload balance, and machine utilization. We can expect that the proposed daily production planning method will be used as a useful tool for operating semiconductor fabrication factories more efficiently and effectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.172-173
• /
• 2015

Construction project involves numerous repetitive operations. Especially in high-rise and apartment houses projects, the amount of repetitive operations increase and a preceding operations delay causes serious damage to the total duration of the project. This study deducts work delay factors by site engineer interview and survey. The study analyzes daily report data to deduct crucial processes affecting masonry work which has been investigated to be one of preliminary processes conducted at the beginning of finish work.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.279-285
• /
• 1998

This study investigated human error characteristics of the 42 fatal industrial accidents reported by staff members of Korea Industrial Safety Corporation. Various types of human error were judged to be primary contributing factors in about 74 percent of the cases. Most of human error made by involved industrial operators resulted from two types of mistakes: (1) mistake in judgement of work situation, and (2) omission in daily check. It was concluded that preparation/observance for work procedure manuals, danger predication training and enforcement/Education of daily check routine would be effective preventive tools for these types of human error attributable to fatal industrial accidents.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.1003-1009
• /
• 2000

Four young swamp buffalo cows of similar age ranging in body weight (W) between 280 to 380 kg and trained for doing physical exercise were used in two consecutive experiments, each using a latin square design, to determine energy expenditure for draught. The experiments consisted of field trials using 4 levels of work load, i.e. no work as control and loads amounting 450 to 500 Newton (N) continuous traction for respectively 1, 2 and 3 h daily for 14 consecutive days for experiment 1, and no work, traction loads equaling 5, 10 and 15% of W for 3 h daily for 14 days for experiment 2. Heart rate during rest and exercise was monitored using PE-3000 HR monitor. Cows were fed only king grass (Penisetum purpuroides) ad libitum and were subjected to balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus RE. RE was calculated from the changes in body-protein and -fat measured before and immediately after the 14 d experimental period assuming an energy equivalent of 39.32 MJ/kg fat and 20.07 MJ/kg protein. $E_{exercise}$ ($EE_{work}\;-\;EE_{resting}$), which was the energy spent for doing the traction during 1, 2 and 3 h was 7.13, 15.45 and 19.90 MJ, respectively. $EE_{work}$ for the 1 h treatment group was 39.75 MJ/d equivalent to 1.30 times $EE_{resting}$. The values for the 2 and 3 h treatment groups were 1.75 and 1.86 times resting energy requirement, respectively. Absolute efficiency of work in all exercise trials of experiment 2 was around 27.28%. The increases of daily $E_{exercise}$ values were correlated to elevation of heart rate (HR) according to the equation $E_{exercise}=(0.270HR^{0.363}\;-\;1)$ MJ, while draught force related to heart rate according to the equation DF (N)=6.66 HR - 361.62. Blood glucose and triglyceride levels were gradually elevated with time during the course of exercise. Mean values of blood glucose were 91.7, 115.0 and 116.2 mg/dl for cows after 1, 2 and 3 h pulling loads at 15% W respectively as compared to 88.2 mg/dl prior to work. In the same order and treatment, mean blood triglyceride concentrations were 13.5, 13.3 and 14.8 mg/dl, and 11.5 mg/dl for control. For blood lactate, the values were 1.68, 1.63 and 1.66 mM, and 0.80 mM for control. Glucose was used as the major source of energy during the initial phase of exercise, but for prolonged work, fat will replace carbohydrate as the main substrate. Accumulation of lactate persisted for some time at the end of the exercise trials.

• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.177-183
• /
• 2016

작업일보는 일일 단위로 계획과 실적이 기록되는 문서로 작업내용, 출력인원, 장비 및 자재 현황 등 다양한 정보를 포함한다. 하지만 작업일보가 여러 단계를 거쳐 수기 작성되는 과정에서 정보의 누락 및 왜곡될 수 있고 업무의 중복 문제가 발생하여 단순 보고에 이용되고 있다. 따라서 본 연구에서는 기존의 작업일보시스템의 문제를 해결할 수 있는 디지털펜 기반의 작업일보시스템을 개발하고 그 적용성 평가를 위해서 실제 건설 현장에 적용해보았다. 그 결과 높은 문자 인식 정확도(94.610%)를 보여주었다. 그리고 정보를 입력하는 추가 업무가 제거되고 휴대 및 이동이 편리하며 사용을 위한 별도의 교육이 필요 없는 장점이 있었다. 본 연구에서 개발한 시스템은 현행 작업일보시스템의 문제를 해결하여 건설현장 문서업무 및 정보관리 효율 개선에 기여할 수 있을 것으로 기대된다.

• The Korean Journal of Physiology
• /
• 제4권2호
• /
• pp.69-81
• /
• 1970

These studies were carried out on 176 persons ranging in age from 20 to 50 years to determine the basal metabolic rates, energy expenditure of various activities, and daily energy expenditure of service personnel in Korea. The measurements of basal metabolic rates were made on 42 subjects by indirect calorimetry using a Douglas' bag and Scholander's gas analyzer. The energy expenditures of various activities of daily life were also measured. The greatest increase in ratio of energy expenditure in the basis of resting metabolism was 277.3% in floor sopping and the least was 40.9% during hair cutting by beauticians. The assessment of the dailly energy expenditure for each subject was made by the factorial method, using a record of their activities throughout each of 24 hours of every survey day. Certain activities were recorded in minute units. The total daily energy expenditure is the sum of all energy expenditure. This was calculated by multiplying the caloric value of the metabolic rate by the time spent on each activity. The result of the total daily energy expenditure records for 17 occupations are summarized. In respect to the daily energy expenditure, most of the occupations are moderate or light work. But the janiter (F), laundress, cook (F), room maid and nurse's aid do heavy work.

• Journal of Nutrition and Health
• /
• 제24권6호
• /
• pp.547-559
• /
• 1991

The purposes of this study were to : a)determine the percentage of labor activities expen-ded in various work functionsof hospital foodservice b)estimate the labor time utilized in each work functions c)investigate the overall work patterns of hospital foodservice and d)provide the basic data for effective labor control This study was conducted in two hospitals with 1300 and 1200 ed capacities and every employees of the dietary department were included in 10days work measurement. Work sampling methodology developed by Donaldson and Ostenso was modified and used for observing overall activities of hospital dietary department. Consistency of data and observa-tion period were verified by 3$\delta$ control chart and control chart. Observed data were satisfied with confidence level of 95% and confidence interval of $\pm$0.05, The results of this study were as follows: 1) The direct work function indirect work function and delay were 74.8%, 9.2%, 16.0% respectively with A hospital and 82.2% 7.2%, 10.6% respectively with B hospital 2) The productivity indices of direct work indirect work and delay were 9.05 min/meal 1.12 min/meal 1.94 min/meal respectively and total 12.11 minutes were utilized per meal served in A hospital and 10.72 min/meal 0.94 min/meal 1.38 min/meal respectively and total 13.04 minutes were utilized per meal served in B hospital 3) Full time equivalent(FTE) utilized in daily work of irect work indirect work and delay were 62.24 men 7.69 men 13.35 men respectively in A hospital and 64.09 men 5.63 men 8.22 men respectively in B hospital. 4) The contents of work activities of each employee group showed that delay time of the service personnel group was more than any other employee groups in both A hospital and B hospital 5) Examination of daily work schedule by time intervals showed that transportation work function was carried out all day so it is necessary to improve this work.

• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.42-53
• /
• 2011

2004년 예정가격 산정방법으로 실적공사비 적산제도가 본격적으로 시행되면서 상대적으로 표준품셈 적산제도의 적용이 하락하였다. 그러나 2010년 하반기 예정가격 산정시 표준품셈 적산제도의 적용비중은 45%이며, 여전히 높은 적용비중을 유지하고 있다. 현행 표준품셈은 예정가격의 산정에 과도한 시간이 소요되고, 시공계획과 자원분배에 적용하기 어려운 단점이 있다. 이와 같은 단점을 개선하기 위하여 본 연구에서는 국내외 품셈의 형식을 고찰하여 이를 국내 도로분야 대표공종에 적용하여 기존 품셈을 일단위 작업조 기반 생산성 정보로 산출하여 유사한 조건하에서 일본 미국의 생산성 정보 및 현장자문을 통한 정보와 비교하였다. 본 연구를 통해 적용된 작업조기반 생산성 정보 산출 방법과 산출 정보의 효용성을 확인하고자한다. 이러한 과정을 통하여 표준품셈을 통한 작업조기반 생산성 정보 산정 방법'과 일단위 작업조 기반 생산성 정보를 제시하고자 한다.