• 제목/요약/키워드: dB(S)

검색결과 9,870건 처리시간 0.038초

CMOS를 이용한 MB-OFDM UWB용 LNA/Down-Mixer 설계 (A Design on LNA/Down-Mixer for MB-OFDM m Using 0.18 μm CMOS)

  • 박봉혁;이승식;김재영;최상성
    • 한국전자파학회논문지
    • /
    • 제16권2호
    • /
    • pp.139-143
    • /
    • 2005
  • 본 논문에서는 $CMOS\;0.18\;{\mu}m $ 공정을 이용하여 MB-OFDM UWB용 RF 수신기의 광대역 LNA와 Down-mixer를 설계하였다. 광대역 LNA는 $3\~5\;GHz$의 대역에서 전력이득은 $12.8\~15dB$, 잡음지수는 2.6 dB 이하, 그리고 입력 IP3는 4 GHz에서 -8 dBm의 특성을 나타내고, 입출력 반사손실은 10 dB 이하의 특성을 보인다. Down-mixer는 3개의 채널에서 2 dB 이하의 gain flatness를 나타내고, 변환이득은 $-2.9\~0.4dB$의 특성을 나타낸다. 또한 LO의 leakage와 feedthrough는 각각 30 dB 이상의 특성을 나타내도록 설계하였다.

Development of the Delamination Evaluation Parameters (I) -The Delamination Aspect Ratio and the Delamination Shape Factors-

  • Song, Sam-Hong;Oh, Dong-Joon
    • Journal of Mechanical Science and Technology
    • /
    • 제18권11호
    • /
    • pp.1932-1940
    • /
    • 2004
  • Although the previous researches evaluated the fatigue behavior of Al/GFRP laminates using the traditional fracture mechanism, their researches were not sufficient to do it : the damage zone of Al/GFRP laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of Al/GFRP laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length (a) and delamination width (b) in Al/GFRP laminate. The details of investigation were as follows: 1) Relationship between the crack length (a) and the delamination width (b), 2) Relationship between the delamination aspect ratio (b/a) and the delamination area rate ((A$\_$D/)/subN// (A$\_$D/)$\_$All/), 3) The effect of delamination aspect ratio (b/a) on the delamination shape factor (f$\_$s/) and the delamination growth rate (dA$\_$D// da). As results, it was known that the delamination aspect ratio (b/a) was decreased and the delamination area rate ((A$\_$D/)$\_$N// (A$\_$D/)$\_$All/) was increased as the normalized crack size (a/W) was increased. And, the delamination shape factors (f$\_$s/) of the ellipse-II(f$\_$s3/) was greater than of the ellipse-I(f$\_$s2/) but that of the triangle (f$\_$s1/) was less than of the ellipse-I(f$\_$s2/).

LC-Tank 매칭 회로를 적용한 RFID 리더용 이중대역 저잡음 증폭기 설계 (A Design of Dual Band LNA for RFID Reader Using LC-tank Matching Circuit)

  • 이제광;고재형;김군태;김형석
    • 정보통신설비학회논문지
    • /
    • 제9권4호
    • /
    • pp.153-157
    • /
    • 2010
  • In this paper, a dual band LNA (Low Noise Amplifier) with a LC-tank matching circuit is designed for 912MHz and 2.45GHz RFID reader. The operating frequency is decided by the LC-tank resonance. The simulated results demonstrate that S21 parameter is 11.683dB and 5.748dB at 912MHz and 2.45GHz, respectively, and the S11 are -10.796dB and -21.261dB, the S22 are -7.131dB and -14.877dB at the same frequencies. The measured NF (Noise Figure) is 0.471 and 1.726 at 912MHz and 2.45GHz, respectively.

  • PDF

3dB Coupler Tuner를 이용한 UHF Power Amp의 설계 (Design of the UHF Power Amp by Using the 3dB Coupler Tuner)

  • Byung Chul Kim
    • 전자공학회논문지A
    • /
    • 제30A권2호
    • /
    • pp.16-21
    • /
    • 1993
  • A newly advanced method of characterizing large signal S-parameters of TR using the overall gain of normally operating TR is proposed based on the load pull method which gives the matching network only. Large signal S-parameters of TR are characterized from the circuit which consists of TR and 3dB Coupler Tuners at the input and output ports, and which is B class biased with 0dBminput signal. Amplifier can be designed to have 8.5dB gain at 770MHz using the calculated large signal S-parameters with the resulting gain of 8.786dB.

  • PDF

Echo제거를 위한 새로운 적응여파기

  • 박규호
    • 전기의세계
    • /
    • 제32권8호
    • /
    • pp.486-493
    • /
    • 1983
  • 기존 Echo제거기의 여파기계수를 binary representation할 때 bit수를 줄이기 위하여 자동이득 조절기를 사용한 새로운 Echo제거기를 제안하였다. 적응여파기 계수수가 55이고 .rho.e=16dB, P/S.leq. dB일때 P.leq.0 dB, S>-42 dB인 경우 새echo제거기는 20bit로서 8bit로 규격화된 디지탈 Processor 또는 기억소자등을 사용하면 30%의 bit절약을 가져온다. 수학적 operation은 대단히 경미하게 증가하며 수렴속도도 훨씬 빠르다.

  • PDF

$0.1{\mu}m$ Metamorphic HEMT를 이용한 고이득 D-Band MMIC 2단 구동증폭기 개발 (Development of a Two-Stage High Gain D-Band MMIC Drive Amplifier Using $0.1{\mu}m$ Metamorphic HEMT Technology)

  • 이복형;이진구
    • 대한전자공학회논문지SD
    • /
    • 제45권12호
    • /
    • pp.41-46
    • /
    • 2008
  • 본 논문에서는 $0.1{\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT기술을 기반으로 하여 D-Band(110 - 140 GHz) 대역에서 동작하는 MMIC 2단 구동 증폭기를 제작하였다. 제작된 구동 증폭기는 밀리미터파 대역인 110 GHz에서 10 dB 이상의 우수한 $S_{21}$ 이득 특성을 보였으며, 이때 반사 특성 또한 $S_{11}$ -3.5 dB와 $S_{22}$ -6.5 dB로 양호한 특성을 얻었다. 이러한 높은 성능의 MMIC 구동증폭기의 특성은 주로 MHEMT 성능에 기인한다. 본 논문에서 적용한 $0.1{\mu}m$ MHEMT는 760 mS/mm의 전달컨덕턴스 특성과 195 GHz의 차단주파수 391 GHz의 최대공진 주파수 특성을 갖는다.

스펙트럼 반전법을 이용한 10 Gb/s 광신호의 200 km 비분산천이 광섬유 전송 (Transmission of 10Gb/s signal over 200km of non-dispersion shifted fiber by using mid-span spectral inversion)

  • 이상수;이창희
    • 한국광학회지
    • /
    • 제7권4호
    • /
    • pp.428-433
    • /
    • 1996
  • 색분산 보상법으로 스펙트럼 반전법을 사용하여 10Gb/s 광신호의 200km 비분산천이 광섬유 전송실험을 수행하였다. 스펙트럼 반전 신호광은 분산천이 광섬유에서의 4광파 혼합 현상에 의해 발생되었다. 스펙트럼 반전 신호광의 반전효율과 신호대 잡음비는 각각 -26.7dB와 23.0dB였다. 수신감도 측정 결과 광섬유를 사용하지 않은 경우 BER $10^{-9}$에서 -28.0dBm이었고, 200km의 비분산천이 광섬유를 사용한 경우에 대해서는 -27.0dBm이었다.

  • PDF

Tunable 매칭 회로를 적용한 RFID 리더용 Dual Band LNA 설계 (A Design of Dual Band LNA for RFID reader Using Tunable Matching Circuit)

  • 오재욱;임태서;최진규;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2007년도 학술대회
    • /
    • pp.3-6
    • /
    • 2007
  • In this paper, a hybrid dual band LNA(Low Noise Amplifier) with a tunable matching circuit using varactor is designed for 433MHz and 912MHz RFID reader. The operating frequency is controlled by the bias voltage applied to the varactor. The measured results demonstrate that S21 parameter is 16.01dB and 10.72dB at 433MHz and 912MHz, respectively with a power consumption of 19.36mW. The S11 are -11.88dB and -3.31dB, the S22 are -11.18dB and -15.02dB at the same frequencies. The measured NF (Noise Figure) is 15.96dB and 7.21dB at 433MHz and 912MHz, respectively. The NF had poorer performance than the simulation results. The reason for this discrepancy was thought that the input matching is not performed exactly and a varactor in the input matching circuit degrades the NF characteristics.

  • PDF

10 Gb/s 무선 전송 THz 송수신기를 위한 초광대역 마이크로스트립 대역통과필터의 구현 (Implementation of Ultra-Wideband Microstrip Bandpass Filter for 10 Gb/s Wireless Transmission THz Transmitter and Receiver)

  • 이원희;정태진
    • 한국인터넷방송통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.1-8
    • /
    • 2011
  • 본 논문에서는 중심주파수 30 GHz에서 3 dB 대역폭(fractional bandwidth)이 50 % 이상인 마이크로스트립 대역통과필터(BPF)를 구현하였다. 구현된 BPF는 10 Gb/s 무선전송 THz 송수신기를 위한 IF 대역에서의 ASK(Amplitude Shift Keying) 방식 송수신용 필터로서 이용하고자 한다. 초광대역 특성을 갖는 마이크로스트립 BPF는 스텝 임피던스 저역통과필터(LPF)와 합성된 ${\lambda}_g/4$ 단락 스터브로 구성되며, LPF는 BPF의 상위 저지대역을 감쇠시키기 위해 사용되었고, ${\lambda}_g/4$ 단락 스터브는 하위 저지대역을 감쇠시키기 위해 사용되었다. 합성 BPF의 측정 결과, 중심주파수 30 GHz에서 삽입손실은 0.65 dB, 10 GHz와 50 GHz에서 저지 특성은 각각 -10 dB와 -16 dB이며, 20~40 GHz 통과대역에서 평탄도는 ${\pm}0.5$ dB로 측정되었다.

폴리아닐린과 그 혼합물의 전자기파 차폐특성 (Electromagnetic Shielding Characteristics of Polyaniline and Its Mixtures)

  • 박종수;임인호;최병수
    • 한국전자파학회논문지
    • /
    • 제12권2호
    • /
    • pp.293-298
    • /
    • 2001
  • Polyaniline(EB)/NMP 용액에 carbonblack, grahpite Ag를 첨가하여 우수한 막질의 free standing film을 제조하였다. 1 mole HCI로 도핑된 polyaniline(ES) free standing film($\sigma$=5 S/cm, t=0.14 mm)을 제조하여 10 MHz~1 GHz의 주파수 영역에서 전자기파 차폐효과를 측정한 결과 23~25 dB의 차폐효율을 나타내었으며, carbonblack, grahpite, AG을 첨가하여 제조한 ES free standing film 과 camphorsulfonic acid(CSA)를 도핑한 polyaniline film의 전자기파 차폐효율 측정결과 각각 30~34dB, 36~42dB, 44~52dB, 34~43dB로 ES free standing film 보다 우수한 특성을 나타내었다.

  • PDF