• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.452-457
• /
• 2008

In order to develop an efficient micropropagation technique effect of plant growth regulators (PGRs) affecting on shoot proliferation from shoot apex in Pyrus ussuriensis was tested. Generally, there was no conspicuous effect on shoot induction by the treatment of PGRs and one or two shoots/explant were induced when cultured on MS medium supplemented with BA and/or BA plus NAA. Both apical shoot necrosis and hyperhydric shoots were observed frequently in multiplied shoots, and callus was formed at the basal part of shoots. About 20% spontaneous rooting was achieved in growing shoots, however the proliferated shoots exhibited poor rooting rate in gelrite supported media. When we tried to ex vitro rooting of the shoot cutting, the shoot cuttings rooted up to 50% with 100 mg/L IBA application. The rooted plantlets grew normally after acclimatization in the greenhouse.

• Journal of Welding and Joining
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2007

Laser Material Processing has been replaced the conventional machining systems - cutting, drilling, welding and surface modification and so on. Especially, LTH(Laser Transformation Hardening) process is one branch of the laser surface modification process. Conventionally, some techniques like a gas carburizing and nitriding as well as induction and torch heating have been used to harden the carbon steels. But these methods not only request post-machining resulted from a deformation but also have complex processing procedures. Besides, LTH process has some merits as : 1. It is easy to control the case depth because of output(laser power) adjustability. 2. It is able to harden the localized and complicated a.ea and minimize a deformation due to a unique property of a localized heat source. 3. An additional cooling medium is not required due to self quenching. 4. A prominent hardening results can be obtained. This study is related to the surface hardening of the rod-shaped carbon steel applied to the lathe based complex processing mechanism, a basic behavior of surface hardening, hardness distribution and structural characteristics in the hardened zone.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.1
• /
• pp.41-48
• /
• 2023

Over the past ten years, numerous industries have undergone upheavals that have significantly altered how businesses interact with their clients and how goods are created and produced bySMEs. Many cutting-edge technologies have recently been created and implemented to enhance business models, facilitate sustainability features for organizations, and boost business capabilities. This essay seeks to understand how digital entrepreneurship functions in developing nations. The results of this study show the effectiveness of digital transformation in the context of SMEs is greatly influenced by aspects including the change of managerial intensity and the involvement and perception of workers, customers, and shareholders. One of the needs that business owners showcased in this study in terms of digitization is infrastructure resources to support digitization such as devices, the Internet, and funds, but also the ability to use digital media for business development. Practical skills that business people want to learn such as product design and management of their social media accounts. There are also aspects of time and self-motivation of the business actor that can speed up or slow down the digitization process. Finally, government support that is structured in encouraging MSMEs is also one of the supporters and drivers of digitalization in the blue economy.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.466-473
• /
• 2020

Fabric current collector can be a promising electrode material for Capacitive Deionization (CDI) system that can achieve energy-efficient desalination of water. The one of the most attractive feature of the fabric current collector is its high tensile strength, which can be an alternative to the low mechanical strength of the graphite foil electrode. Another advantage is that the textile properties can easily make shapes by simple cutting, and the porosity and inter-fiber space which can assist facile flow of the aqueous medium. The fibers used in this study were made of woven structures using a spinning yarn using conductive LM fiber and carbon fiber, with tensile strength of 319 MPa, about 60 times stronger than graphite foil. The results were analyzed by measuring the salt removal efficiency by changing the viscosity of electrode slurry, adsorption voltage, flow rate of the aqueous medium, and concentration of the aqueous medium. Under the conditions of NaCl 200 mg/L, 20ml/min and adsorption voltage 1.5 V, salt removal efficiency of 43.9% in unit cells and 59.8% in modules stacked with 100 cells were shown, respectively. In unit cells, salt removal efficiency increases as the adsorption voltage increase to 1.3, 1.4 and 1.5 V. However, increasing to 1.6 and 1.7 V reduced salt removal efficiency. However, the 100-cell-stacked module showed a moderate increase in salt removal efficiency even at voltages above 1.5 V. The salt removal rate decreased when the flow rate of the feed was increased, and the salt removal rate decreased when the concentration of the feed was increased. This work shows that fabric current collector can be an alternative of a graphite foil.

• Journal of Plant Biotechnology
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1999

Large-scale cultures of plant cell, tissue, and organ have been achieved by using BTBB. When different sized BTBBs (5 L, 20 L, 100 L, 300 L, and 500 L) were tested for the culture of yew cells (Taxus cuspidata Sieb. et Zucc.), cell growth increment reached to 94.5% in SCV after 24 days of culture with 30% of inoculation cell density. However, there were some variations in the production of taxol and its derivatives among the BTBBs of different size. Approximate 4 ㎎/l of taxol and 84 ㎎/l of total taxanes were obtained by using a 500L BTBB after 6 weeks of culture. With a 20L BTBB, about 20,000 cuttings of virus-free potatoes (cv. Dejima) could be obtained by inoculating 128 explants and maintaining 8 weeks under 16 hr light illumination. The frequency of ex vitro rooting of the cuttings revealed as more than 99% under 30% shade. By incorporating two-stage culture process consisting of multiple bulblet formation in solid medium and bulblet development in liquid medium, mass propagation of lily through bioreactor seemed to be possible. In the case of 'Marcopolo', the growth of mini-bulblets in BTBB was nearly 10 folds faster than that of the solid medium. Time course study revealed that maximum MAR yield of ginseng (Panax ginseng C. A. Meyer) in a 5 L and 20 L BTBB after 8 weeks of culture was 500 g and 2.2 ㎏, respectively. By cutting the MAR once and/or twice during the culture, the yield of root biomass could be increased more than 50% in fresh weight at the time of harvest. With initial inoculum of 500 g of sliced MAR in a 500 L BTBB, 74.8 ㎏ of adventitious root mass was obtained after 8 weeks of culture. The average content of total ginseng saponin obtained from small-scale and/or pilotscale BTBBs was approximately 1% per gram dry weight. Based on our results, we suggest that large-scale cultures of plant cell, tissue, and organ using BTBB system should be quite a feasible approach when compared with conventional method of tissue culture.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.278-285
• /
• 2008

An efficient transformation method for soybean [Glycine max (L.) Merr.] using meristematic tissues of germinating seeds has been established. The embryonic axes were excised from germinating seeds of Korean soybean cultivar, Iksannamulkong and 0.5-2 cm long segment containing meristematic tissues were prepared by cutting hypocotyl region. The explants were inoculated with Agrobacterium tumefaciens strain LBA4404 harboring a binary vector with the bar gene as a selectable marker gene and a ${\beta}-glucuronidase$ (GUSINT) reporter gene, and then co-cultured for 7 days on co-cultivation medium (CCM). The meristematic tissues were cultured on shoot induction medium (SIMP6) supplemented with 0.4 mg/l $N_6-benzylaminopurine$ (BAP) and 0.1 mg/l indolebutyric acid (IBA) in the presence of 6 mg/l L-phosphinotricin (PPT) for 2 weeks and the surviving explants were transferred to shoot elongation medium (SEMP6). Transformation was confirmed by Southern blot analysis and the transformation efficiencies ranged from 1.48 to 2.07%. The new modified transformation method was successfully implemented for obtaining several transgenic lines with SMV-CP gene. It is expected that this method could efficiently be used for the transformation of recalcitrant soybean cultivars.

• Nutrition Research and Practice
• /
• v.13 no.1
• /
• pp.64-69
• /
• 2019

BACKGROUND/OBJECTIVES: Alzheimer's disease is a neurodegenerative disease that induces symptoms such as a decrease in motor function and cognitive impairment. Increases in the aggregation and deposition of amyloid beta protein ($A{\beta}$) in the brain may be closely correlated with the development of Alzheimer's disease. In this study, the effects of an adzuki bean extract on the aggregation of $A{\beta}$ were examined; moreover, the anti-Alzheimer's activity of the adzuki extract was examined. MATERIALS/METHODS: First, we undertook thioflavin T (ThT) fluorescence analysis and transmission electron microscopy (TEM) to evaluate the effect of an adzuki bean extract on $A{\beta}_{42}$ aggregation. To evaluate the effects of the adzuki extract on the symptoms of Alzheimer's disease in vivo, $A{\beta}_{42}$-overexpressing Drosophila were used. In these flies, overexpression of $A{\beta}_{42}$ induced the formation of $A{\beta}_{42}$ aggregates in the brain, decreased motor function, and resulted in cognitive impairment. RESULTS: Based on the results obtained by ThT fluorescence assays and TEM, the adzuki bean extract inhibited the formation of $A{\beta}_{42}$ aggregates in a concentration-dependent manner. When $A{\beta}_{42}$-overexpressing flies were fed regular medium containing adzuki extract, the $A{\beta}_{42}$ level in the brain was significantly lower than that in the group fed regular medium only. Furthermore, suppression of the decrease in motor function, suppression of cognitive impairment, and improvement in lifespan were observed in $A{\beta}_{42}$-overexpressing flies fed regular medium with adzuki extract. CONCLUSIONS: The results reveal the delaying effects of an adzuki bean extract on the progression of Alzheimer's disease and provide useful information for identifying novel prevention treatments for Alzheimer's disease.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.205-210
• /
• 1994

This study was conducted to develop a method of mass production by cutting of superior genotypes of Larix leptolepis and to examine the effects of ortet age, clone, crown position, and an applied plant growth substance upon the rooting of cuttings. Four different ortet ages, 2, 8, 16 and 30 years and three levels of root-promoting substances, indole butyric acid(IBA), at 1000, 2000, and 5000ppm were employed. Greenwood cuttings were taken from mother trees in late July and rooted for three months in rooting medium containing peatmoss : vermiculite : perlite(1 : 1 : 1 by volume). with temperature controlled at $20-25^{\circ}C$, humidity by intermittent misting and light by partial shading in the greenhouse. Cuttings treated with 1000ppm IBA showed highest rooting, with 80%, 71%, 52%, 25% for 2-, 8-, 16-. 30-year-old ortet, respectively. Untreated cuttings showed rooting of 52%, 48%, 36%, 20% for the ortet age of 2, 8, 16, 30 years, respectively. The average number of adventitious roots decreased with increasing ortet age from 2 to 30 years, whereas IBA treatment increased the number of roots in all ages. A variation in rooting among 20 clones tested was observed. The 4 clones, Chungnam 6, and 7 and Chonbuk 1, and 9 showed good rooting of about 67%, while Kangwon 49 showed boor rooting of 40% at 1000ppm IBA treatment. When crown position was compared, cuttings taken from middle crown showed highest rooting of 60%, while cuttings from upper crown showed lowest rooting of 53%.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.531-539
• /
• 1994

We examined the in vitro rooting and survival of tissue cultured plantlets of Quercus acutissima Carr. and Pinus densiflora Sieb. et Zucc. after addition of Pisolithus tinctorius(Pt) ectomycorrhizal fungus inoculum to the medium and effects of three levels of sucrose and phosphorus in culture media. Shoots of Quercus acutissima were obtained from winter buds of a 30-year old tree and cuttings of Pinus densiflora from germinated seed, and they were inoculated with Pt in vitro. In both species, Pt enhanced shoot length, survival, number of adventitious roots, root length, and rooting percentage. Survival in Quercus acutissima was increased from 75% in control to 100% in Pt inoculation. Pt inoculation increased the percentage of rooting from 20% to 70% in Quercus acutissima cuttings and from 63% to 100% in Pinus densiflora cuttings. It is concluded that mycorrhizal inoculation to tissue cultured Quercus acutissima Carr. and to in vitro cutting of Pinus densiflora Sieb. et Zucc. has practical application to improvement of poor root development and initial period of reduced shoot growth in vitro.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.311-320
• /
• 2018

The purpose of this study is to evaluate the flow ability of the thermoplasticized Gutta Percha in different temperatures. Four Gutta Percha products were classified by its hardness (soft, medium, and hard) and were experimented by the Rheometer (Melt flow indexer MFI-10, DAVENPORT, England) measuring apparatus, in $(23{\pm}2)^{\circ}C$, and in a relative humidity of ($50{\pm}5$) %, following the guidelines of ISO 1133-1:2011. The heating temperature ranged from $108^{\circ}C$, $160^{\circ}C$ to $200^{\circ}C$, and the load at 2.16 kg and 3.8 kg. The Gutta Percha was cut in 5 mm to be suitable for the rheometer pressurization process. After the experiment was conducted with a preheating time of 5 minutes, a cutting time of 5-240 seconds, and a sample of 10 grams, the Gutta Percha did not show any changes in fluidity for $108^{\circ}C$, $160^{\circ}C$, but showed a change in its flow ability in $200^{\circ}C$. Also, the Gutta Percha did not show any changes in its fluidity when it was pressurized by 2.16 and 3.8 kilograms. Therefore, this experiment shows that the heating temperature and the cut-off time showed a significance while measuring the melt flow rate.