• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.1
• /
• pp.10-24
• /
• 2017

The research takes note of the formation process and settling period of Gwandong-Palkyung(關東八景, Eight Sites of Eastern Korea), the representative palgyeong(prominent eight sites) and jipgyeong(集景, landscape collection of scenic beauty), and investigates the time of formation regarding the palkyung and jipgeyong of Gwandong's scenic beauty through the analysis and interpretation of bibliographic data, and reference data. The result of the study is as follows. As the first document that records the terminology of "Gwandong-Palkyung" is "Daphongeunggil(答洪應吉)" of Yi, Hwang(李滉), Gwandong-Palkyung is inferred to be settled within the recognition of the people even before the 16th century. The geographic analysis result including "Sinjeung Donggukyeojiseungram(新增東國輿地勝覽)", Gwandong-Palkyung expanded as Gwandong-Sipkyung in early to middle of the 16th century. The first confirmed landscape collection regarding Gwandong-Palkyung in this study is confirmed in Shin Zup(申楫)'s "Yeonggwandong-Palkyung(詠關東八景)", thus, the terminology of Gwandong-Palkyung existed before 16th century at the latest. The settlement time of current "Palkyung" collection is estimated to be early 17th century at the latest. Poetries regarding Gwandong-Palkyung, and the frequency on the appearance of Gwandong scenic beauties are analyzed as making clear of the concentrated phenomenon on the sceneries of Gwandong-Palkyung. On the other hand, the collection of Gwandong-Palkyung in the domain of arts is confirmed initially in the ${\ll}$Gwandongpalkyungdobyeong(關東八景圖屛)${\gg}$ of Heo, Pil(許泌). Gwandong-Palkyung, expressed as the actual scene landscape painting shows similar tendencies of the conditions in the jipgyeong from the poetry, but the appearance rate of the painting subject was more prominent in visual solidarity and cohesion due to the reflection of the importance on icon(圖像) of the art works produced with particular meaning in the case of fixed ideal system. From late Joseon to modern times, ${\ll}$palpokbyeongpung(八幅屛風)${\gg}$ of various forms of folk painting is a corroborative evidence notifying that the cultural phenomenon of Gwandong-Palkyung has entered the universal period of embrace. Also, the 13 scenic beauties of Gangwon-Do appearing in the games of Namseungdo and Myeongseungyuramdo include Gwandong-Palkyung, which confirms the settlement of Gwandog-Palkyung even within the culture of games in late Joseon. Such results demonstrate the existence of awareness regarding Gwandong-Palkyung from the first half of the 15th century, which is presumed to have completely settled in the 17th century through the continuous development of formative process in the 16th century. Ultimately, Gwandong-Palkyung is the concrete formation of regional scenic beauties that individually gained its reputations as scenery from the Koryo Dynasty to late 17th century. Gwandong-Palkyung of the scenic beauty of Gwandong is a unique cultural scenery of the region that have germinated and formed through the process of cutting and polishing of long time to collect the best eight of scenic beauty from the many participation of sightseeing culture.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.3-17
• /
• 1998

The purposes of this study is to investigate the possibility of planting trees at space land in the riverside. The space land is for the green space. Calculating the plantable space in the representation section and the flood flowing stability of the existing banks based on the hydrological and meteorological data of the Kap-Chon riverbasin located in Tae-jon, the following results are drawn. (1) The flood discharges in each flow section are $698.7m^3/s$ in section 1, $654.6m^3/s$ in section 2, and $1353.3m^3/s$ in section 3 during 100 years recurrence interval. Because the designed-flood discharges in those sections are $1719.9m^3/s$, $2119.7m^3/s$, and $1512.8m^3/s$ respectively, safety for flood flowing is sufficient in existing banks. (2) The possible clearance for planting trees is 1.80m in section 1, 3.90m in section 2, and 0.01m in section 3. Planting clearance is enough in section 1 and 2. However, planting should be planned after estimating a rise-height due to the bridge piers, because many piers under riverine-highway are now on the construction in section 2. The section 3 does not have sufficient clearance for planting trees, but the planting is possible after getting enough flow area with slope by cutting the terrace land on the river artificially heightened. (3) In case of planting a tree 70cm diameter in $1m^2$ in section 1, the water level increases by 0.60m. Planting a tree in a $48m^2$ area increases the water level by 0.90m. Considering that plantable clearance is 1.8m in section 1, it is sufficient to flow safely. But if the trees are planted so compactly from the upper stream, expected heavy resistance is expected due to caught materials on the trees. So, trees have to be planted widely in upper streams but compactedly in lower streams. (4) The river width without changing, Kap-Chon's flow channel can be snaked in accordance with the nature law the wide terrace land in the riverside. Decreased flow area due to planting trees will be compensated by the inclination of terrace land. And, it is theoretically proved that the flood discharge is safe even though the terrace land on the river is parked similar to the nature. Planting trees in the terrace land of the Kap-chon river to the extent that flood flowing is not adversely affected, we can get the enjoyable park to citizens not spending expensive cost. It also contributes to the recovery of ecosystem, which gives the natural beauty of river and shade to citizens and becomes good natural-educational places for children.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.375-391
• /
• 2014

Animation movie is a non-photorealistic animated art that consists of formative language forming a frame based on a story and cuts describing frames that form the cuts. Therefore, in expressing an image, artistic expression methods and devices for a formative space are should be provided in a frame while cuts have the images between frames faithfully. Short animation movie is produced by various image experiments with unique image expressions rather than narration for expressing subjective discourse of a writer. Therefore, image style that forms unique images and various image directions are important factors. This study compared the experimental image directions of and , both of which showed a production method of film manipulation. First, while uses pixilation that produces images obtained from live images through painting and many optical disclosure process on a cell mat, was made with diverse collage techniques such as tearing, cutting, pasting, and folding hundreds of scenes from action movies. Second, expresses non-causal relationship of characters by their repetitive behaviors and circulatory image structure through a fixed camera angle, resisting typical scene transition. On the other hand, has an advancing structure that progresses antagonistic relationship of characters through diverse camera angles and scene transition of unique images. Third, in terms of editing, uses a long-take short cut technique in which the whole image consists of one short cut, though it seems to be many scenes with the appearance of various characters. On the other hand, maximizes visual fun and commitment by image reconstruction with hundreds of various short cuts. That is, both works have common features of an experimental work that shows expansion of animated image expressions through film manipulation that is different form general animation productions. On top of that, delivers routine life of diverse human beings without clear narration through image of conceptualized spaces. expresses it in a new image space through image reconstruction with collage technique and speedy progress, setting a binary opposition structure.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.64-70
• /
• 2015

In order to control garlic white rot (Sclerotium cepivorum), which threatens garlic production in farmers fields, soil solarization (solar sterilization), sclerotia germination inducers and effective microorganisms as biological control agents, and chemical fungicides have been used. Among them, fungicide has been largely used to reduce garlic white rot. In this study, the antifungal activities of five fungicides, prochloraz(a.i. 25%, EC), tebuconazole (a.i. 25%, WP), flutolanil (a.i. 15%, EC), iminoctadine tris-albesilate (a.i. 40%, WP) and isoprothiolane (a.i. 40%, EC) with different mode of action, in mycelial growth, sclerotia germination and sclerotia production, were tested. The inhibitory effects of the 5 fungicides on the mycelial growth, and sclerotia germination and production of garlic white rot pathogen (S. cepivorum T11-2) were investigated on potato dextrose agar (PDA) and their control efficacies were evaluated on garlic flakes. There was no mycelial growth of S. cepivorum T11-2 on PDA amended with $0.8{\mu}g\;mL^{-1}$ of prochloraz or $100{\mu}g\;mL^{-1}$ of tebuconazole. Also prochloraz and tebuconazole inhibited perfectively the sclerotia germination of the pathogen at 10 and $1.0{\mu}g\;mL^{-1}$, respectively. In spite of a very low activity of isoprothiolane in mycelial growth and sclerotia germination of S. cepivorum T11-2, it showed a good inhibitory activity against sclerotia production of S. cepivorum T11-2 on PDA amended with $1.67{\mu}g\;mL^{-1}$. Prochloraz, tebuconazole and flutolanil showed above 70% of control value when they were treated at $100{\mu}g\;mL^{-1}$ using the garlic flake cutting-method.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.4
• /
• pp.156-166
• /
• 2000

This study was carried out to provide the information on seasonal variations of water content under highway asphalt pavements which influence on the dynamic behaviour and durability of pavements, and to assess the correlation between water content and soil or meteorological factors. Total eight sites for water content measurement which included fives sites in Kyungbu, two sites in Honam, and one site in Youngdong Highway were selected considering the variations in geology, topology and meteorology factors over all the country. Water contents under asphalt pavements were measured up to 170 cm depth every two week for total 13 months of August 1992 through September 1993 using neutron moisture meter(CPN-503DR). The range of water content ($\theta$$_{w}$) at the upper soils of above 50 cm depth was 7~12% and was not quite different regardless of sites, except for Iseo site. However, soil water contents below 60 or 70 cm depth were significantly different between the measurement sites, that is, the lowest water content was 5% at Kyungsan site and the highest water content was 20% at Iseo site. For all the sites, seasonal variations in water content during the experimental period were little, their range was within only 1 to 4%. Seasonal variations of water content in original or cutting area, which were 4% more or less, were slightly larger than in bedding areas, which were below 2%. Water contents under asphalt pavements had statistically significant positive correlations with silt and clay content in soil, but there were little correlations between water content and meteorological factors such as precipitation, relative humidity, mean air temperature, and wind velocity.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.88-95
• /
• 2010

The purpose of this study was to compare the root canal shaping ability of 4 rotary NiTi instruments in simulated root canals. For the preparation of thirty two curved root canals, Mtwo instruments using "single length"technique, and Profile, ProTaper Universal, and K3 using crown-down technique (N = 8) were used. All canal samples were prepared by reaching an apical canal size of #30. Pre- and post-instrumentation digital images were recorded and an assessment of canal shape was determined using a computer image analysis program SigmaScan Pro (Systat Software Inc., San Jose, CA, USA). The changes of the dimension of inner walls of canals, (2) the changes of the dimension of outer walls of canals, and (3) the centering ratio were measured at 7 measuring points, and then data were statistically analyzed using one-way ANOVA and Duncan's test. The results were as below; 1. The root canal shaping ability of Profile was significantly faster than that of other rotary NiTi instruments (p < 0.05). 2. The deformation and fracture of all instruments used for this study were not experienced. 3. In the degree of changes of the dimension of inner walls of canals, Profile demonstrated the lowest changes of the dimension of inner walls of canals except at the measuring points of the 1 and 2 mm (p < 0.05). However, the ProTaper Universal showed the highest changes of the dimension of inner walls of canals at all measuring points (p < 0.05). 4. In the degree of changes of the dimension of outer walls of canals, Mtwo demonstrated the lowest changse of the dimension of outer walls of canals except at the measuring point of the 1 mm (p < 0.05). However, Profile exhibited the highest changes of the dimension of outer walls of canals at the measuring points of 3 and 4 mm and ProTaper Universal and K3 showed the largest changes of the dimension of outer walls of canals at the measuring points of 1, 2, 6, and 7 mm (p < 0.05). 5. In degree of centering ratio, Profile demonstrated the least centering ratio comparing with the centering ratio shown by other NiTi instruments at the measuring points of 1, 4, 5, and 6 mm. Results suggest that in the coronal part of canal preparation, active cutting files such as ProTaper Universal may efficiently flare the canal orifice and form a better taper, and in the apical part of the canal, files which have a better centering ability such as Profile may maintain the original canal curvature and reduce the shaping time.

• Journal of Sericultural and Entomological Science
• /
• v.24 no.2
• /
• pp.43-54
• /
• 1983

In a field trial, the influence was studied by measurement of growth and leaf yields and chemical composition (in organic cations and anions and total nitrogen) with two nitrogen dressings (lower nitrogen treatment 25kg and higher nitrogen treatment 75kg urea/10a as the summer fertilizer) after the summer cutting. The results were as follows; 1. With increasingn nitrogen dressing, branch length and weight were enchanced. The fresh weight of leaves was higher to be 273.6kg/10a in the higher nitrogen treatment than in the lower nitrogen treatment on 20 September. 2. The moisture content of leaves lasted above 73% until on 30 August. Afterward it decreased sharply upto 63% on 20 September. In higher nitrogen treatment it was higher about 0.1∼1.8% than in lower nitrogen treatment. The increasing nitrogen dressings combined with leaf condition led to be soft until on 10 October. 3. Dry matter weight of leaves started decreasing around on 10 September, whereas that of branches increased until around 30 September indicating that the dry matter moved to branch and root from leaves. 4. The increase in Ca$\^$2+/ content was particularly evident, whereas the K$\^$+/ and Mg$\^$2+/ decreased with growth. The Ca$\^$2+/ content was much higher in the high nitrogen treatment than in the low nitrogen treatment. 5. With rapid decrease in total nitrogen and water in the leaves around the end of August, the Ca$\^$2+/ and Cl$\^$-/ which were higher in the lower part moved up to the upper part. Whereas the K$\^$+/, H$_2$PO$_4$$\^$-/ and SO$_4$$\^$2-/ which were higher in the upper part moved down to the lower part. 6. Total nitrogen content decreased sharply 3,200me/kg DM to 2,000me/kg DM at the end of August changing the maxmium content of total nitrogen from upper to lower part in the low nitrogen treatment on 12 September and in the high nitrogen treatment on 22 September, and an apex of branches was died and fallen 10 days after respectively. 7. The sum of cation in leaves (∑C) increased from 1400me/kg DM to 1600me/kg DM with growth, wherease that of anions (∑A) was approximatly the same during the whole growing season. As the result, the ionic balance (C-A) increased from 1000me/kg DM to 1200me/kg DM. 8. ∑C, ∑A and (C-A) were higher in the high nitrogen treatment than in the low nitrogen treatment due to be much higher of Ca$\^$2+/ content and higher of NO$\^$-/$_3$, SO$\^$2-/$_4$ and H$_2$PO$_4$$\^$-/ content.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.125-154
• /
• 1972

The major purpose of this survey is to collect the related information on technical aspects for solving the problems which are facing producing farmers and regions, provide scientific facts to farmers related personals and institutions and aimed at contributing the development of sericultural sector in Korea. The results are as follows; (1) The area of mulberry field per a farmer which was selected as sample ranges from 3.0 to 370a with its average 45. 1a. And yet, the average of new cultivated areas is above than that of ordinary ones by 56.3 to 33.8a. The largest area is Honam hill area with 101. 1a and e smallest is Muzinzang with 20.8a. Shortly, a large number of farmer belongs to 11 to 50a with 66.5 per cent. (2) The ratio of clay and loam soils which are inadequte for growing of mulberry trees is 28.3 per cent and particulary high in new cultivated area with 36.2 per cent. And yet, base soil is occupied with 45 per cent of heavy clay and particularly even 54.2 per cent in new cultivated area. On the other hand, the number of areas which the contents of organic matters is relatively low, with 48.2 per cent is near the half, but the ratio of mulberry fields which seems to contain organic matters abundantly is only 7.2 per cent. (3) The varieties of mulberry trees are Ilgirae, Gaeryangseoban, Suwonsang No.4 and Nosang. The ,ratio of the varieties are 33.3%, 25.7%, 18.0% and 10.5%, respectively. Consequently the four varieties enumerated above occupies 93.5 per cent. (4) The mulberry fields are almost composed of exclusive mulberry fields and its ratio was 92.3 per cent. The number of planted trees per 10a arrange from 480 to 1,390 and its average is 846. But most of them nearly belong to 701 to 1,000 with 91.3per cent. (5) The second year's autumn after planting is generally adopted as the first harvesting season, and its ratio is 73.0 per cent, but autumn of the years and next spring are not few, and its ratio are 12.7 and 8.7 per cent. The first harvesting method is relatively normal with 88.8 per cent of ratio. From the viewpoint of harvesting method, picking leaves was applied with 97.7 per cent of ratio in young larvae rearing and picking shoot and picking shoot after harvest with branches were applied with 80.0 per cent of ratio in grown larvae rearing. The ratio of applying the harvesting method of picking leaves were 97.7 and 91.7 per cent in young larva and grown larva in autumn rearings. But there was also picking leaves absolutely with 7.1 per cent of ratio(Chunwon was 47 per cent) and yet, the farmers applying cutting before shooting in spring was no more than 17.8 percent.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.81-90
• /
• 2012

This study was evaluated high end research grade Near infrared spectrophotometer (NIRS) to low end popular field grade multiple Near infrared spectrophotometer (NIRS) for rapid analysis at forage quality at sight with 241 samples of Italian ryegrass silage during 3 years collected whole country for evaluate accuracy and precision between instruments. Firstly collected and build database high end research grade NIRS using with Unity Scientific Model 2500X (650 nm~2,500 nm) then trim and fit to low end popular field grade NIRS with Unity Scientific Model 1400 (1,400 nm~2,400 nm) then build and create calibration, transfer calibration with special transfer algorithm. The result between instruments was 0.000%~0.343% differences, rapidly analysis for chemical constituents, NDF, ADF, and crude protein, crude ash and fermentation parameter such as moisture, pH and lactic acid, finally forage quality parameter, TDN, DMI, RFV within 5 minutes at sight and the result equivalent with laboratory data. Nevertheless during 3 years collected samples for build calibration was organic samples that make differentiate by local or yearly bases etc. This strongly suggest population evaluation technique needed and constantly update calibration and maintenance calibration to proper handling database accumulation and spread out by knowledgable control laboratory analysis and reflect calibration update such as powerful control center needed for long lasting usage of forage analysis with NIRS at sight. Especially the agriculture products such as forage will continuously changes that made easily find out the changes and update routinely, if not near future NIRS was worthless due to those changes. Many research related NIRS was shortly study not long term study that made not well using NIRS, so the system needed check simple and instantly using with local language supported signal methods Global Distance (GD) and Neighbour Distance (ND) algorithm. Finally the multiple popular field grades instruments should be the same results not only between research grade instruments but also between multiple popular field grade instruments that needed easily transfer calibration and maintenance between instruments via internet networking techniques.