• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.125-130
• /
• 2011

This paper shows a method to design complementary filter using least square. The complementary filter is one of useful filters estimating angle. The basic concept of this filter is to enhance advantages of each sensor that angle detecting using a gyroscope has good accuracy at a high frequency and an accelerometer at a low frequency. When designing complementary filter, the most commonly used method is using cut-off frequency. However, it may be not easy to obtain a cut-off frequency. This paper presents a systematic method to determine the coefficients of the complementary filter using well-known linear least squares minimizing error between estimating angle and true angle.

• 대한전자공학회논문지
• /
• 제21권1호
• /
• pp.32-37
• /
• 1984

본 논문에서는 저역 통과 특성을 나타내는 것으로 알려져 있는 이동 평균 여파기의 마이크로프로세서 구성에 대한 실제적이고 간단한 기법을 연구한 것이다. 설계의 편의를 위하여 이동 평균 여파기에 대한 차단 주파수의 근사식과 필터링 알고리즘도 제시하였다. 상용 마이크로프로세서 Z-80을 사용한 실험 시스템의 몇 가지 실험결과를 제시했다. 고주파 잡음이 효과적으로 제거된 것이 확인되었으며 차단 주설수의 근사식의 결과는 실측결과와 거의 일치됨이 확인되었다.

• 센서학회지
• /
• 제15권4호
• /
• pp.263-268
• /
• 2006

We have demonstrated a highly sensitive temperature sensor using an etched single mode fiber with a thermally expanded core region. Large core size of thermally expanded core facilitates access to evanescent wave by the wet etching. The etched region was surrounded by a low dispersive external medium with high thermo-optic coefficient. Due to the large difference between the dispersion property of the fiber and that of the external medium, the device reveals a cut-off properties at spectral region. The cut-off wavelength was shifted by the variations of the environmental temperatures because of thermo-optic effect of the external medium. The sensitivity of the fabricated device was found to be $45nm/^{\circ}C$.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1584-1589
• /
• 2013

A new and significantly small guided and resonant structure is suggested to take over bulky metallic hollow waveguides used in military satellite transceivers. Below Ku-band, the conventional waveguides resulting in quite heavy transceivers will be replaced by the low profile SIW(substrate integrated waveguide) structures that are distinguished from the others in that the suggested ones have much lower cut-off frequencies by the circuital configuration of DNG(dobule negative) constitutive parameters and become even smaller than the other SIWs. The design scheme is validated by the circuit and full-wave simulations from the guided, resonant, and coupled structures. Besides, a bandpass filter as the suggested coupled structure is fabricated with a cheap substrate in a low-budget fabrication process and its frequency response is measured as verification of the purpose of the design.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1706-1711
• /
• 2016

Electromagnetic wave simulation was performed to predict characteristics of manufactured cutoff probe at low temperature magnetized plasma medium. Microwave cutoff probe is designed for research the properties of magnetized inductively coupled plasma. It was shown that the cutoff probe method can safely be used for weakly magnetized high density plasma sources. Cutoff probe system with two port network analyzer has been prepared and applied to measure electron density distributions in large area, 13.56MHz driven weakly magnetized inductively coupled plasma source. The results shown that, the plasma frequency confirmed cut-off characteristics in low temperature plasma. Especially, cut-off characteristics was found at upper hybrid resonance frequency in the environment of the magnetic field. In case of a induced weak magnetic field in inductively coupled plasma, plasma density estimated from the cutoff frequency in the same way at unmagnetized plasma due to nearly same plasma frequency and upper hybrid resonance frequency. The plasma density is increased and uniformity is improved by applying a induced weak magnetic field in inductively coupled plasma.

• 융합신호처리학회논문지
• /
• 제3권2호
• /
• pp.45-52
• /
• 2002

EMI(전자파간섭)은 전기/전자제품의 이상동작을 야기할수 있는 장치로부터 방사되는 10KHz에서 3GHz대역의 전자파를 말한다. 본 연구에서는 안정적이고 정상적인 동작을 위해 2.5Gbps SDH시스템에서 전자파발생원인 STGU유니트에 대하여 전자파간섭을 시뮬레이션하였으며 On-Site Test를 통하여 조화주파수에 대한 전자파 세기를 측정하였다. 또한 소자들간의 EMI를 최소화하기 위하여 2GHz의 Cut-off주파수에서 저역통과필터를 설계하였다. 저역통과필터를 STGU유니트에 적용한 결과 전자파는 약 20dBm이상 감소되었으며 동기기준클럭의 품질을 결정하는 TIE와 MTIE를 측정한 결과 ITU-T G8l3을 만족하였다.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1953-1958
• /
• 2012

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with such electric faults, specially short circuit faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30ms(KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problem, this paper proposes a prevention apparatus using the line voltage drop of neutral wire and some semiconductor switching devices. Some experimental tests of the proposed apparatus confirm the validity of the analytical results.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.876-880
• /
• 2013

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The principal factor of the fire is electric arc or spark accompanied with such electric faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problems, this paper studies on an arc fault circuit interrupter (AFCI) using the distorted voltage wave in electric arc faults. The proposed voltage sensing type AFCI is an electrical fire prevention apparatus of new conception that operates a circuit breaker with sensing the instantaneous voltage drop of line voltage at electrical faults occurrence. The proposed AFCI is composed of control circuit topology using some semiconductor switching devices. Some experimental tests of the proposed AFCI confirm practicality and the validity of the analytical results.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.9-14
• /
• 2012

본 논문에서는 신호 분리와 합성이 가능한 다이플렉서를 설계 제작한 후 특성을 비교 분석하였다. 저역 통과 필터와 고역 통과 필터의 특성을 정합하여 다이플렉서로 구현함으로써 신호의 분리와 합성이 가능하다는 것을 시뮬레이션을 통해 확인하였다. 또한 신호 분리와 합성의 가능성을 입증하기 위해 실제 마이크로 스트립 구조로 제작하여 측정한 결과 다이플렉서의 저역통과 필터는 -0.4 dB의 삽입손실과 -30 dB의 반사손실, 1.6 GHz의 차단수파수 특성을 보였고 고역 통과 필터는 -0.8 dB의 삽입손실과 약 -30 dB의 반사손실, 1.9 GHz의 차단수파수 특성을 갖는 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.389-398
• /
• 1994

Calcium aluminate glasses transmit light at relatively long wavelengths up to 6 ㎛ and exhibit also low Rayleigh scattering values. However they have a tendency to get devitrified easily, which limits their use as routine optical materials. Here, the ternary system CaO-Al2O3-SiO2 glasses with low-silica (<30 mol%) were prepared to prevent the devitrification of CaO-Al2O3 glasses and the properties were investigated as functions of composition. The addition of SiO2 to calcium aluminate glasses promoted their stability, which was due to the decrease of non-bridging oxygens and the reconnection of network. As SiO2 was added, density, refractive index, molar volume of oxygens and thermal expansion coefficient decreased continuously. But the glass transition temperatures with increasing SiO2 contents were raised and then lowered. It was postulated that the anomaly was related to the changes of the middle range order as well as the short range order. As the amount of SiO2 in the glass was increased, the IR cut-off values moved to shorter wavelength owing to 'Si-O' antisymetric stretching vibration. The IR cut-off wavelength of the glasses with 5 and 30 mol% SiO2 was 4.90, 4.55 ㎛, respectively.