DOI QR코드

DOI QR Code

Highly sensitive temperature sensor based on etched fiber with thermally expanded core

식각된 열확산 코어 광섬유를 이용한 고감도 온도 센서

  • Kim, Kwang-Taek (Department of Electronics and Optoelectronics, Honam University) ;
  • Song, Hyun-Suk (Department of Electronics and Optoelectronics, Honam University) ;
  • Shin, Eun-Soo (Department of Electronics and Optoelectronics, Honam University) ;
  • Hong, Ki-Bum (Department of Electronics and Optoelectronics, Honam University)
  • 김광택 (호남대학교 전자.광공학부) ;
  • 송현석 (호남대학교 전자.광공학부) ;
  • 신은수 (호남대학교 전자.광공학부) ;
  • 홍기범 (호남대학교 전자.광공학부)
  • Published : 2006.07.30

Abstract

We have demonstrated a highly sensitive temperature sensor using an etched single mode fiber with a thermally expanded core region. Large core size of thermally expanded core facilitates access to evanescent wave by the wet etching. The etched region was surrounded by a low dispersive external medium with high thermo-optic coefficient. Due to the large difference between the dispersion property of the fiber and that of the external medium, the device reveals a cut-off properties at spectral region. The cut-off wavelength was shifted by the variations of the environmental temperatures because of thermo-optic effect of the external medium. The sensitivity of the fabricated device was found to be $45nm/^{\circ}C$.

Keywords

References

  1. T. Jin, Q. Li, J. Zhao, K. Cheng, and X. Li, 'Ultrabroad-band AOTF based on cladding etched single mode fiber', IEEE Photon. Tech. Lett., vol. 14, no. 8, pp. 1133-1135, 2002 https://doi.org/10.1109/LPT.2002.1021993
  2. Q. Li, A. A. Au, C. H. Lin, E. R. Lyons, and H. P. Lee, 'An efficient all-fiber variable optical attenuators via acostooptic mode coupling', IEEE Photon. Tech. Lett., vol. 14, no. 11, pp. 1563-1565, 2002 https://doi.org/10.1109/LPT.2002.803895
  3. E. R. Lyons and H. P. Lee, 'An efficient electrically tunable etched cladding fiber bragg grating filter tested under vacumm', IEEE Photonics Tech. Lett., vol. 13, no. 5, pp. 484-486, 2001 https://doi.org/10.1109/68.920759
  4. W. Daogang, Q. Guanhua, C. Hua, and Y. Zhen, 'Birefringent enclose fiber-optic polarizer', Electronic Components and Technology Conference, Proceedings, 1st pp. 493-496, 1991
  5. M. Wakaki, Y. Komachi, H. Machida, and H. Kobayashi, 'Fiber-optic polarizer using birefringent crystal as a cladding', Applied Optics, vol. 35, no. 15, pp. 2591-2594, 1996 https://doi.org/10.1364/AO.35.002591
  6. J. Villatoro, D. Monzon-Hemamdez, and D. L. Moreno, 'In-line tunable band-edge filter based on a singlemode tapered fiber coated with a dispersive mate-rial', IEEE Photon. Technol. Lett., vol. 17, no. 8, pp. 1665-1667, 2005 https://doi.org/10.1109/LPT.2005.851993
  7. N. K. Chen, S. Chi, and S. M. Tseng, 'Wide band tunable filter short-pass filter based on side-polished fiber with dispersive polymer overlay', Opt. Lett., vol. 29, no. 19, pp. 2219-2221, 2004 https://doi.org/10.1364/OL.29.002219
  8. K. Shiraishi, T. Yanagi, and S. Kawakami, 'Light propagation characteristics in thermally diffused expanded core fibers', J. Lightwave Technol., vol. 11, no. 10, pp. 1584-1591, 1993 https://doi.org/10.1109/50.249900
  9. K. Shiraishi, Yoshizo, and S. Kawakami, 'Beam expending fiber using thermal diffusion of the dopant', J. Lightwave Technol., vol. 8, no. 8, pp. 1151-1161, 1990 https://doi.org/10.1109/50.57835
  10. O. Hanaizumi, Y. Aizawa, H. Minamide, and S. Kawakami, 'Fabrication of an expended core fiber having MFD of 40 urn preserving outer diameter', IEEE Phonic Tech. Lett., vol. 6, no. 7, pp. 842-844, 1994 https://doi.org/10.1109/68.311473
  11. T. lzawa and S. Sudo, 'Optical fibers: Materials and fabrication', KTK Scientific Publishers, Tokyo, 1987
  12. W. G lung, S. W. Kim, K. T. Kim, E. S. Kim, and S. W. Kang, 'High-sensitivity temperature sensor using a side-polished single-mode fiber covered with the polymer planar waveguide', IEEE Photon. Tee!. Lett., vol. 13, no. 11 pp. 1209-1211, 2001 https://doi.org/10.1109/68.959366
  13. 김시홍, 정웅규, 김광택, 송재원, 강신원, '열광학 폴리머 평면도파로의 소산장 결합을 이용한 광성뮤형 온도센서', 센서학회지, 제9권, 제1호, pp. 15-21, 2000