• The Korean Journal of Community Living Science
• /
• v.24 no.4
• /
• pp.471-483
• /
• 2013

The study aimed to investigate the wearing & purchase practices with shirts and analyze the group differences on the shirt size, BMI & perceived body type. Total usable questionnaires were obtained from 350 male office workers aged from 20 to 49 in Seoul. Results were gained from the statistical analysis such as factor analysis, ANOVA, t-test using SPSS 21.0. The results were as follows. First, male office workers had difficulty in choosing the right size among the different sizes of ready-made shirts and had trouble in vexatious order & high price for custom-made shirts, however, they had an emphasis on design and size for the 2 kinds of shirts in common. Second, the groups by shirt size, BMI, perceived body type showed significant differences in shirt fitness and shirt wearing methods of ready-made shirts but showed no difference in purchase intention of custom-made shirts. Fatness and body type were proved to be important for wearing shirts and it was assumed that there were socio-psychological reasons for the custom-made shirt purchase. Finally, the groups by the experience of purchasing custom-made shirts showed no difference in shirt fitness and shirt wearing methods of ready-made shirts but showed difference in purchase intention of custom-made shirts. This meant that purchase of a custom-made shirt stimulated another purchase. Therefore, shirt brands should focus on the first purchase of custom-made shirts.

• The Journal of the Korean dental association
• /
• v.56 no.6
• /
• pp.333-338
• /
• 2018

The mouth guard is a device with elasticity to be installed in the oral cavity. It has a function to reduce the trauma in the oral cavity and to protect the teeth and surrounding tissues from trauma. The purpose of mouth guard is to prevent trauma and concussion. It is mandatory to wear a mouthguard in sports where there is a lot of contact and the possibility of trauma or concussion in the mouth area is high. The mouse guard is divided into a stock type, a mouth formed type, and a custom made type according to the manufacturing method. The custom made type is made on the individual dentition model and has excellent retention because of its excellent fit. Also, the effect of trauma prevention is excellent. It is possible to design and adjust by the dentist and reduce the complaint the athlete has about the mouthguard. In this article, the process of making a dentist-customized mouthguard was described.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.123-134
• /
• 2001

The purpose of this study to compare the purchasing behaviour of men's business suits, among custom suits, system order, and ready-made suits, centering around the choice of information source, risk perception and benefits sought. The survey of this study was collected from 450 adult male in Seoul. The data was analyzed by factor analysis and ANOVA. The result of this study were as follows : 1. Custom suits, system order, and ready-made suits consumers have a significant difference in the choice of information source. The consumer attaching most importance to the impersonal information source is the system order users, custom suits users, and ready-made suits users respectively. However there was no significant difference in the personal source among 3 different purchasing behaviour of men's suits. 2. For the risk perception, 1) the group who perceived the highest in economic risk is the system order users, followed by custom suits users, and ready-made suits users. 2) the group who perceived performance risk as being the highest concern is the ready-made suits consumers, followed by system order user, and custom suits user. 3) the group who perceived the socio-psychological risk as the highest is the ready-made suits consumers, and followed by custom suits user and system order users. 4) there is no difference among the three groups with respect to the fashionability loss risk. 5) the group of the highest perceiving the useful loss risk is the ready-made suits consumers, and the next is system order users, custom suits users. 6) the group of the highest perceiving the time and convenience loss risk is ready-made suits users, and the next is system order users, custom suits users. 3. For the benefit sought, the group of the highest perceiving the aesthetics is custom suits consumers, and the next is system order users, ready-made suits users.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.556-568
• /
• 2018

In this study, we surveyed the current status and sizing system of the custom dress shirts sold through online shopping, compared with the sizing system of the ready-made dress shirts. We tried to collect the information needed to make the well fitted dress shirts for middle-aged men from this study. The 17 online custom dress shirt brands were selected and the sales type, sales price, design options and size options of each brand were analyzed. The sizing systems of online custom dress shirt brands were compared with the sizing system of the 10 ready made dress shirt brands. The result showed that online custom dress shirts brands offered a variety of design options and size options to meet the consumers' individuality, taste and demand for good fit. In the ready-made brands, all 10 brands were using the same size notation system. In the same size designation, the difference in product size among the ready-made brands showed a tendency to be smaller than the online custom brands. The online custom brands had the different size notation system among brands. The size notation, the number of size designation and the size interval were different for each brand. Also, in the online custom brands, the product size among brands differed from each other in the same size designation. Therefore, the standardized size information and sizing system for middle-aged men that could be used as criteria when making the product size and pattern design in online custom brands were needed.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.2
• /
• pp.71-86
• /
• 2002

This study's purpose is to gain basic data for the factory automation of manufacturing custom-made girdles. For this study , obese women in their 30s and 40s was experimented through direct measuring and by the 3D scanner, by means of which the proportions of the subject's body was measured. Based upon the results of this experiment, individually designed girdles were made. In order to gain the basic data for the factory automation of manufacturing custom-made girdles, the patterns and the clothing pressure and the feeling of wearing such girdles were analyzed. This study can be summarized as follows: The material properties and the designs of existing functional girdles in the market were studied thoroughly, and the subject were required to wear those existing girdles. On the basis of this result, the experimental girdles were designed and produced which could serve well the subject's intension. The experimental girdles were of the basic long-type in order to apply to all sorts of girdles, and they were produced according to the style and pattern of the existing grading system. The second experiment was conducted by applying the subject's body measurements. Due to the elasticity of the material, in girdles the smaller measurements were to be used in this second experiment were: 80% of waist size, 84% of the hip and 85% of the thigh. To determine the length of the girdles, the same measurements were applied. The test results of the feeling of wearing the experimental girdles showed that the second, custom-made experimental girdles were better. According to the test results of the clothing pressure, the second experimental girdles(custom-made girdles) marked the higher pressure than the first on every part of the body, especially on the hips and thighs. Thus, it can be said that the second experimental girdles are better than the first in lifting up the hips. It is expected that the design methods developed in this study can be utilized as basic resources for the factory automation system of manufacturing custom-made girdles.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.35.1-35.7
• /
• 2018

Background: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. Case presentation: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect. Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. Conclusions: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.1
• /
• pp.1-14
• /
• 1992

The purpose of this study was to evaluate the accuracy of reproduction of stone casts made from complete-arch impressions using different trays. The trays used were : 1) nonperforated custom tray, 2) perforated custom tray, 3) nonperforated Rim-Lock tray, 4) perforated stock tray. Impressions were made from an dentulous acrylic resin model with metal inserts in first premolars and second molars. Transverse distance, sagittal distance and diagonal distance were measured using 4 landmarks. Measurements were made by using 3 dimensional measuring machine. The impression material used was an addition silicone. Impressions were poured at once with a Type IV dental stone. Data were analyzed using ANOVA and student t-test with a sample size of five. The results were as follows : 1. There were statistical differences in amount of dimensional change in according to the tray types. In amount of mean dimensional change, perforated custom tray was the first smallest, nonperforated custom tray was the second, nonperforated Rim-Lock tray and perforated stock tray were the largest. 2. There were statistical differences in amount of dimensional change between nonperforated custom tray and nonperforated Rim-Lock tray, and between perforated custom tray perforated stock tray. 3. There were satistical differences in amount of dimensional change between nonperforated custom tray and perforated custom tray, but there was not a statistical difference between nonperforated Rim-Lock tray and perforated stock tray. 4. There was not a statistical difference in amount of dimensional change between upper and lower arch in all tray types.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.537-542
• /
• 2005

Dentofacial trauma can result in tooth fracture, avulsion, facial bone fracture. The Unites states and Japan mandated the use of mouthguards for contact sports. But, Korean didn't. Mouthguards divided into ready-made type and custom-made type. Mouthguards protect the lips, intraoral soft tissues, teeth and provide the mandible with resilient support to prevent jaw fracture and dislocations. Sports-related accidents have been reported to be one of the most common causes of dentofacial trauma. Sports trauma of involving teeth with incomplete root formation cause long chair time, multiple visit, economic considerations, additional dental services. So, mouthguards can offer considerable protection against sports-related trauma.

• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.402-408
• /
• 2006

The choice of suitable hip implant is one of important factors in the total hip arthroplasty (THA). In clinical view point, an improper adaptation of hip implant might induce abnormal stress distribution to the bone, which can shorten the lifespan of replaced hip implant. Currently, interest in the custom-designed hip implants has increased as studies reveal the significance of geometric shape of patient's femur in modeling and designing the implants. In this study, we have developed custom-designed hip implant models with various sizes, and analyzed the stress distribution in the bone and bone cement using the Finite Element Method. It was found that minimizing the gap between implant stem and femoral cavity is crucial to minimize the stress concentration in the bone.

• Journal of the Korean Society of Costume
• /
• v.58 no.3
• /
• pp.93-104
• /
• 2008

The purposes of this study are to examine the concept of customized fashion product design as a new industrial paradigm reflecting individual customers' needs in modern society, and to grasp its sociocultural meaning. It is thought that this study will be helpful to investigate the cultural thinking of contemporaries represented through the consumption. For this, the documentary study and practical case study have been executed. As modern fashion business becomes more consumer-oriented due to the industrial paradigm shift, there appeared the prosumer as both consumer and producer. The type of customized fashion product design can be classified as 1) the traditional custom-made design in haute couture and classic tailoring 2) the tailor-made design in the prestige line of ready to wear 3) DIY custom design 4) mass customized design of customer involvement. The traditional custom-made design in haute couture and classic tailoring and the tailor-made design in the prestige line of ready to wear is to provide the distinguished product which has the best quality as well as the excellent beauty for VIP consumer. The DIY custom design is for creative consumer searching for the fun of craftsmanship to take part in producing personally. The mass customized design of customer involvement is to personalize product by selecting design module in mass production. Ultimately the sociocultural meaning of the customized fashion product design can be interpreted as (1)endowing special meaning to personal identity (2)distinguishing the privilege by rarefied authenticity (3)returning to analog sensibility 4)pursuing creative fun 5)thinking in a user-centered way.