• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1622-1627
• /
• 2008

A suspension is a core part, determining running stability and riding quality of vehicles and its stiffness is essential parameters in the process of vehicle designing. Suspension stiffness shall be adjusted to meet requirements of running stability and curve running performance, as adding stiffness to primary suspension for running stability in high-speed running results running performance degradation in curved track. The purpose of the report lies in utilization of usable data for optimization of suspension via analyzing running performance through changing stiffness of railway vehicle suspension.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1697-1702
• /
• 2010

It has been recognized for decades that the spherical bearing which is sliding on curved surface in the intrinsic behavior is optimized for the railway bridge requiring a large slope deflection. However, the spherical bearing is easily corrosived at the PSC girder bridge which is exposed to the outside so the normal function of bridge bearing is not fulfilled fully. It is common that the corrosion is happened at the operating plate of steel bridge bearing and generally it is necessary to replace the bridge bearing after 20~25 years. Accordingly, It costs multi billion dollars for maintenance each year and the necessity of improvement become a issue. Korea Rail Network Authority(KR) suggested to apply the Elastomeric bearing instead of Spherical bearing through the task of construction site of 2006. But the normal Elastomeric bearing is optimized for the Highway bridge so it needs the special consideration to satisfy each design condition required by railway bridge. As the result of examination of Elastomeric bearing at the railway bridge construction site, the stress is decreased by effective dispersion of earthquakes and the maintenance fee is also decreased.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.130-135
• /
• 2016

It is very hard to analyze the train derailment safety quantitatively at the curved section because of the diversified affect parameters including the complex interaction between wheel and rail, the train conditions such as the shape of wheel, suspension system, the track conditions such as the radius of curve, cant, transition curve, and the operation conditions, etc. Two major factors related to the running safety of railway vehicle are classified as the railway vehicle and the track condition. In this study, when the railway vehicle passing through curves of actual track condition of subway line NO.3 in seoul ($Yeonsinnae{\leftrightarrow}Gupabal$), the effect that has influence on running safety depending on rail inclination. The analysis result of 1/40 rail inclination condition is more favorable on running safety than other rail inclination conditions because derailment coefficient and wheel unloading ratio are the lowest.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.93-99
• /
• 2008

The SeoulMerto, operating subway line No.$1{\sim}4$, was constructed in the metropolitan Seoul with the highest population. When it was built, the design was challenged to sharp curved tracks considering the protection of buildings, cultural assets, the connection to ground roads and rivers as well as to elevated railway in some parts. Lots of residential apartments and business complex have gradually increased in the area around subway stations and railway lines according to the urban development. Consequently, Requirements of better quality of life and comfortable environment caused the citizen complain for the noise. It has become one of serious social issues. In this paper, Noise level was analyzed using noise map measured in the running train of all routes. The analysis on the noise level was conducted according to railway type, track components type, seasonal type, retirement degree of the vehicle and subway station. Especially, Noise characteristics were analyzed by noise level data measured in the inside and outside of the train with geometry types of the concrete track. This study will contribute fundamental data for the "The Development of Sound-Absorbing Block on Concrete Track" promoted on The National R&D Project.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.512-520
• /
• 2017

On a typical railway, trains travel using the friction between the wheel and the rail. Contact pressure is generated between the wheel and the rail, and the magnitude of the contact pressure changes depending on the weight, speed, wheel-set hunting, and contact point of the vehicle. In this study, the contact characteristics were analyzed through the finite element analysis for the wheel/rail system on curved track, and fatigue damage and wear rate of wheel/rail according to contact pressure were analyzed through rolling contact fatigue test. Results indicate that, general and heat treated rails showed higher wear rate than wheels, and general and heat treated rail wear rate increased rapidly over a certain number of repetitions. In addition, the general rail wear rate was about 7 ~ 15% higher than that of the heat treated rail, and a regression equation for the rail wear rate with the contact pressure in the contact pressure range of 900 ~ 1,500 MPa was presented.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.11-19
• /
• 2017

Since operation of railway trains is a major source of particle pollution in tunnel air, a particle removal device can be an effective measure to remove wear particles. To obtain design conditions of the particle removal device that will be installed underneath the railway trains, the wind speed and particle concentration underneath the trains were investigated using a three-dimensional ultrasonic anemometer and a DustTrak aerosol monitor, respectively. The measurements were made for the trains running on Seoul Metropolitan Subway Line 5 on February 10, 2015. The data were analyzed according to the track geometry (straight, curved) and train speed pattern (acceleration, cruising, and deceleration) between stations. Train speed was also analyzed. The average wind speed and $PM_{10}$ concentration underneath the trains were ~30% of the train speed and ${\sim}200{\mu}g/m^3$ for both straight and curved sections. Average $PM_{10}$ concentration for deceleration sections was higher than that for acceleration sections.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.339-350
• /
• 2018

The rail wear measurements in urban underground railway have been analyzed to predict the particulate matter emission caused by rail wear which is one of the major sources of particulate matter emission for underground railway systems. From the rail profile variations measured in the interval of one and half year by dedicated rail wear measuring instrument over the commercial urban underground railway line, 'line-s' which is about 45km long, the characteristics as well as the amount of rail wear have been analyzed after dividing the whole line into about 170 section with radius of curve(R). It has been concluded that the vertical wear parameter V0 and corner wear parameter C0 have been selected to represent the wear amount of straight and curved rail respectively. The amount of rail wear as well as the particulate matter emission by rail wear over the whole line normalized by the rail length as well as the number of train has also been deduced from the relationship between the rail wear parameters and the amount of rail cross-section area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.229-239
• /
• 1996

for shortening of running time on existing line, speed up railways feel strongly the necessity of it, for fully realizing a role of transportation system, for human life style is high. and increasing of time value. Especially curved lines zone have crucial effects on the speed of train, in case the shortening of running time, it is thought, speed up in curved lines zone, considering a character of route alignment in korea, we obtain saving time using lateral force index for safety running of train and comfortable ride of passengers. The results of this study show that all curved zone improvements for the shortening of the train running time more efficiently than extension of transition curve.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1069-1073
• /
• 2011

When the train is running on the small curved line, there would be severe contact between the rail and wheels, which cause noise and vibration as well as abnormal wear on the rail and the wheels. In order to solve these problems, the steering bogie has been developed. To verify steering performance of the steering bogie, steering angles of two trains, one is the advanced EMU with the steering bogie, another is a conventional EMU with the conventional bogie, were measured while running on the small curve. this comparing test shows that the steering bogie has much higher steering performance than the conventional bogie on the same curved line. To verify more performance data of the steering bogie, further testing and monitoring will be done with the advanced EMU in the test track.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2153-2162
• /
• 2011

The goal of this Paper is to reduce rail's wear in curved track by applying an additional surface layer material(High hardness and High resistance capacity of wear) on the top of the railhead. In order to evaluate appropriation of a coating material, experimental tests such as the varieties of fundamental properties tests (hardening, wear, tensile, and bending) and RCF(rolling contact fatigue)test were performed to establish fatigue wear and damage mechanism. As a result, wear performance of coating rail is better than heated rail about 6times and normal rail about 8~9times.