• 한국수자원학회논문집
• /
• 제31권3호
• /
• pp.269-277
• /
• 1998

본 연구에서는 수리실험을 실시하여 만곡부의 흐름특성과 만곡부에서의 교각 주위 국부세굴형상, 최대 국부세굴심 등을 분석하였다. 또한, 기존의 세굴보호공법 중 원환에 의한 보호공법을 만곡부에 적용하여 세굴감소효과를 분석하였다. 180' 만곡수로에 대해 이동상 실험결과 본 실험조건에서는 최대 횡방향 하상경사가 150' 단면에서 발생하였으며, 원환에 의한 세굴감소효과는 유로 직선부에서 최대 40%, 만곡부에서는 150' 단면 외측의 경우 최대 44%의 감소효과를 보였다. 폭이 교각폭에 2배인 원환에 대하여 실험한 결과, 유로 직선부에서는 원환을 .02h(여기서 h는 수심)만큼 하상저면에 설치하였을 때 가장 효과적이었으며, 유로 만곡부에서는 0.1h 만큼 하상저면에 설치하였을 때 가장 효과적이었다.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2012

In this study, the flow characteristic analysis at the curved-channel of the actual channel section is compared and reviewed using the 2D RMA-2 model and the 3D FLOW-3D model. the curve section with curve rate 1.044 in the research section is analyzed applying the frequency of he project flood of 100 years. According to the result, the issue for the application of the FLOW-3D Model's three-dimensional numeric analysis result to the actual river is found to be reviewed with caution. Also, application of the 3D model to the wide basin's flood characteristic is determined to be somewhat risky. But, the applicability to the hydraulic property analysis of a partial channel section and the impact analysis and forecast of hydraulic structure is presumed to be high. In addition, if the parameters to reflect the vegetation of basin and the actual channel, more accurate topological measurement data and the topological data with high closeness to the current status are provided, the result with higher reliability is considered to be drawn.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.367-370
• /
• 2007

Present study examines detonation wave propagation characteristics in annular channel. A normalized value of channel width to the annular radius was considered as a geometric parameter. A parametric study was carried out for a various regimes of detonation waves from weakly unstable to highly unstable detonation waves. Numerical approaches that used in the previous study of numerical requirements of the simulation of detonation wave propagations in 2D and 3D channel were used also for the present study with OpenMP parallization for multi-core SMP machines. The major effect of the curved geometry on the detonation wave propagation seems to be a flow compression effect, regardless of the detonation regimes. The flow compression behind the detonation wave by the curved geometry of the circular channel pushes the detonation wave front and results in the overdriven detonation waves with increased detonation speed beyond the Chapmann-Jouguet speed. This effect gets stronger as the normalized radius smaller, as expected. The effect seems to be negligible beyond the normalized radius of 10.

• 한국방재학회 논문집
• /
• 제4권4호
• /
• pp.13-19
• /
• 2004

본 연구에서는 만곡부 피해지점을 조사함에 있어 피해가 극심하게 발생한 유역을 선택하여, 만곡부의 피해 관련 인자들로 추정되는 인자들에 대하여 2002년 강릉시 남대천 유역을 대상으로 조사하였다. 선정 조사 된 하천은 9개이며 채택된 피해지점은 23개 지점이다. 제시된 회귀직선식에서는 사행파장과 하천연장, 사행대와 하천연장의 상관계수가 가장 높은 것으로 나타났다. 또한 분석된 특성인자들 중에 하상경사와 사행대, 곡률비와 하폭의 관계를 포락곡선으로 제시하고자 하였다. 이것은 만곡부의 수해복구설계 및 하천 정비시 재해예방에 도움이 될 것이다.

• 대한기계학회논문집B
• /
• 제26권9호
• /
• pp.1302-1310
• /
• 2002

A direct numerical simulation in turbulent curved channel flow is performed. The drifting Taylor-Gortler vortices are identified by applying a conditional averaging. A new algorithm is proposed based on the wavelet transform of the wall information. A continuous wavelet transform with Marr wavelets is employed to decompose the flow signals at a chosen length scale. An active cancellation is applied to attenuate the Taylor-Gortler vortices and to reduce the wall skin friction.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.33-38
• /
• 2019

Researchers have recently begun to study hot stamping processes to shorten the mold cooling time and improve productivity. These publications explain that the mold cooling time can be reduced by using a curved cooling channel, where the mold surface is processed to a uniform depth, instead of a straight cooling channel that uses the conventional gun drilling machine. This study investigates the characteristics of the front pillar of an automobile after using a mold with a curved cooling channel. To analyze the change in properties, we used a 1.6 mm boron steel blank and heated the prototype at $930^{\circ}C$ for 5 minutes. Next, we formed the prototype with a load of about 500 tons while varying the mold cooling time between 1 and 10 seconds. We subjected each prototype specimen to a tensile strength test, a hardness test, and a tissue surface observation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.102-109
• /
• 2016

The hydrodynamic interaction between two large vessels can't be neglected when two large vessels are closed to each other in restricted waterways such as in a harbor or narrow channel. This paper is mainly concerned with the ship maneuvering motion based on the hydrodynamic interaction effects between two large vessels moving each other in curved narrow channel. In this research, the characteristic features of the hydrodynamic interaction forces between two large vessels are described and illustrated, and the effects of velocity ratio and the spacing between two vessels are summarized and discussed. Also, the Inchon outer harbor area through the PALMI island channel in Korea was selected, and the ship maneuvering simulation was carried out to propose an appropriate safe speed and distance between two ships, which is required to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. Under the condition of $SP_{12}{\leq}0:5L$, it may encounter a dangerous tendency of grounding or collision due to the combined effect of the interaction between ships and external forces. Also considering the interaction and wind effect as a parameter, an overtaken and overtaking vessel in narrow channel can navigate while keeping its own original course under the following conditions; the lateral separation between two ships is about kept at 0.6 times of ship length and 15 degrees of range in maximum rudder angle. On the other hand, two ships while overtaking in curved narrow channel such as Inchon outer harbor in Korea should be navigated under the following conditions; $SP_{12}$ is about kept at 1.0 times of ship length and the wind velocity should not be stronger than 10 m/s.

• 대한기계학회논문집B
• /
• 제40권3호
• /
• pp.173-179
• /
• 2016

본 연구에서는 전산유체역학 상용코드를 이용하여 수소 개질기의 곡유로 채널형에 대하여 수치해석적 연구를 수행하였다. 선행연구모델에 대한 수치해석 모델과 다른 관 형태의 곡유로 채널을 모델링하여 수치해석적으로 비교하였다. 4가지 타입의 곡유로 채널형 개질기의 수치해석 결과 메탄올 전환율은 타입1~4까지 각각 45.0%, 45.3%, 45.6%, 45.6%로 ${\pm}0.6%$ 포인트의 차이로 거의 차이가 없음을 나타내었다. 유동특성에 대해서는 사각타입의 관과 45도 곡관의 각도를 가지는 타입2에서 상대적으로 가장 균일한 유동 특성 및 메탄올 농도 분포를 보였으며, 원형타입의 관과 90도 곡관의 각도를 가지는 타입3에서 상대적으로 가장 불균일한 유동특성 및 메탄올 농도분포 특성을 나타내었다. 곡유로 채널형 개질기의 설계 시에는 45도 곡관의 각도를 가지는 타입과 같이 사각타입의 관과 45에 가까운 곡관의 각도를 가지도록 설계해야 한다는 결과에 도달하였다.

• 한국수자원학회논문집
• /
• 제30권1호
• /
• pp.15-22
• /
• 1997

하천형성의 중요한 요인이 되는 사행하천의 흐름은 막곡호안에 많은 영향을 준다. 특정한 하천에 대해 하도개량을 적용시키기 위한 일반적인 기준을 기술하기는 어려우나 토목 설계자에게 어떤 원칙과 지침을 제공하는 것은 대단히 중요하다. 본 고정상 실험연구의 목적은 평균유속과 유로만곡부에서의 곡률변경으로 최대 유속의 크기를 구하여 매번의 수리모형실험을 실시하지 않고도 중소하천의 개수에 이용할 수 있는 자료를 제공함에 있다.

• 멤브레인
• /
• 제2권2호
• /
• pp.104-111
• /
• 1992

A curved channel duct is designed, built and used specifically to produce Dean vortices as a result of flow around a $180^{\circ}C$ curve. We present evidence using optical reflection of the existmace of the vortices in the curved section and following flat section. Also, three different feed soludons(DI water, a monodispersed styrene-divinyl-benzene latex particle suspension and a yeast suspension) were used to determine the effectiveness of Dean instabilities to destabilize polarization layers. For each suspension, the flux data were compared as a function of time for flow conditions with and without Dean vortices, for a $0.2{\mu}m$ microfiltration membrane. Any permeation flux improvement was not sustained for $2.0De_c$ due to the vortex-decay in the flat section after the curved channel, but a 15~30% permeation improvement was obtained for $3.8De_c$.