• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.39-52
• /
• 1991

The purpose of this study were to compare the condylar path and the anterior angle of glenoid fossae, and analyze the condylar path, and classify the patterns of condylar path. Thirty-three male and female dental students with normal occlusion and masticatory system ranging in age from 24 to 27, without present symptoms and any history of TM joint disturbance, were selected for this study. Then, sixty-six TM joint were examed. Transcranial radiographs of TM joint and Cephalometric radiographs under mandibular protrusive movement were obtained. They were taken at six positions on protrusive movement. The results obtained were as follows : 1. The sequence of the frequeny of condylar movement patterns were concave curve, "S"shape curve, convex curve, and reverse "S"shape. 2. The horizontal distance of the greatest changed position of condylar angle averaged 2.6mm. 3. The condylar path angle averaged 36.91 degree. 4. The angle of the anterior slope of glenoid fossae averaged 37.28 degree. 5. The distance fo condylar movement averaged 5.98mm and the distance of condylar horizontal movement averaged 4.71mm. 6. The slope of articular eminence was correlated to the condyalr path and three were no significant differences between right and left side of the anterior slope of articular eminence, and the condyalr path angle.

• 한국전자통신학회논문지
• /
• 제13권4호
• /
• pp.705-712
• /
• 2018

위상배열안테나는 빔 조향 각도에 따라 방사 특성이 변화한다. 모노펄스 추적 시스템은 합 및 차신호의 방사특성을 기반으로 추정 각을 산출하는 시스템이다. 따라서 위상배열안테나를 이용한 모노펄스 추적 시스템의 경우, 빔 조향 각도에 따라 모노펄스 비율 곡선이 변화하기 때문에 추적정확도가 낮아지는 문제가 발생한다. 단일 채널 모노펄스 시스템의 경우, 시스템 구성 변수의 변화를 통해 모노펄스 비율 곡선이 제어된다. 본 논문에서는 빔 조향 각도에 모노펄스 시스템 구성 변수를 적응형으로 제어하는데 참조할 수 있는 간소화된 수식을 제시하였다. 제시된 수식은 빔 조향 각도뿐만 아니라 방사 특성에 영향을 주는 위상배열안테나 설계 변수에 대응하여 균일한 모노펄스 비율 곡선을 유도할 수 있다.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.381-388
• /
• 1988

본 연구에서는 설계조건에 만족하는 정확한 지주높이를 얻기 위하여 엄밀해를 가진 현수곡선이론을 바탕으로 하여 설계변수들과의 관계를 유도 및 수식화 하였다. 이를 최적설계문제로 정의하여 필요한 제한조건을 만족시키는 범위 내에서 지주의 굴적각들을 최소로 줄이는 최적화지법을 도입하여 체계적인 설계방법을 제시 하였다. 해석에 관한 설계예의 모델을 선정하여 굴절각들을 비교.검토하고 실험을 통하여 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.215-218
• /
• 2001

To improve the performance of PID controller of high order systems by model reduction, we proposed a new model reduction method in frequency domain. A new model reduction method we proposed, considered four points (${\angle}G(jw)=0$, $-{\pi}/2$, $-{\pi}$, $-3{\pi}/2$) in stead of two points (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve. And for high order systems that it have not two point (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve, we proposed a method to annex very small dead time. This method has a annexed very small dead time on the base model for reduction, and we cancel it after to get the reduced model. It is shown that the performance of proposed method is better than any other methods.

• 동력기계공학회지
• /
• 제18권1호
• /
• pp.22-31
• /
• 2014

This paper introduced the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new velocity data reduction method using both a commercial two-dimensional curve-fitting program and the zone partition method of a calibration map was firstly introduced in this study. This new calibration method can be applied up to the wide flow angle of ${\pm}80^{\circ}$ despite of using a five-hole pressure probe because this data reduction method showed a comparatively good performance in calculating yaw and pitch angles from the calibration map.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.9-15
• /
• 2003

To improve the performance of PID controller of high order systems by model reduction, we proposed two model reduction methods. One, Original model with two point $({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$ in Nyquist curve used gradient base method and genetic algorithm. The other, Original model without two point$({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$in Nyquist curve used to add very small dead time. This method has annexed very small dead time on the base model for reduction, and we remove it after getting the reduced model, and , we improved Smith-predictor for a dead-time compensator using genetic algorithms. This method considered four points$({\angle}G(jw)=0,\;-\pi/2,\;-\pi,\;-3\pi/2)$ in the Nyquist curve to reduce steady state error between original and reduced model. It is shown that the proposed methods have more performance than the conventional method.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1345-1351
• /
• 2013

Variable iron loss as function of current phase angle of Interior Permanent Magnet Synchronous Motor(IPMSM) was calculated through Curve Fitting Method(CFM). Also, a magnetic flux density distribution of iron core according to current phase angle was analyzed, and an iron loss calculation was performed including harmonic distortion. The experiment was performed by production of non-magnetizing model for the separation of mechanical loss, and the iron loss was calculated by the measurement of input using power analyzer and output power using dynamometer. Some error was generated between experimental results and calculation value, but an iron loss diminution according to current phase angle followed a same pattern. So, errors were generated by measurement, vibration, noise, harmonic distortion loss, etc.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.94-99
• /
• 2011

Micro-scale surface pattern has an benefit of tribological application under lubricated sliding contact. Therefore, a special pattern, that has to reduce the coulomb friction under contact, is considered to be necessary for improved efficiency of machines. The current study investigated the friction property of angle effect for micro-scale grooved crosshatch pattern on bearing steel surface using pin-on-disk type. The samples fabricated by photolithography process and then these are carry out the electrochemical etching process. We discuss the friction property due to the influence of hatched-angle on contact surface. We could be explained the lubrication mechanism for a Stribeck curve. It was found that the friction coefficient depend on an angle of the crosshatch on contact surface. It was thus verified that micro-scale crosshatch grooved pattern could affect the friction reduction.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.190-195
• /
• 2005

A Femur is the longest and largest bone which supports body in human musculoskeletal structure. Therefore, it may cause heavy loss of blood when it is suffered by a simple or complex fracture, and the complication is very dangerous with a possibility of severe tissue damage. In this study, the femoral cancellous angle change is estimated in order to design the Korean femoral IM nail. Generally, it is various in the size and curvature of femoral cancellous bone depending on patient's body dimension. Therefore surgeon has difficulty in fitting this femoral IM nail to the patient in the surgical procedure. In our study, we tries to estimate femoral lateral curve angle with more precise method based on CT image of the femur and utilize this information on the design of femoral IM nail for Korean patients.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.296-303
• /
• 1987

본 논문에서는 동력전달용 기어에 주로 쓰이는 물림률 1.3 이상일 때, 치면접 촉응력과 공칭굽힘응력이 작게되는 풀림각 1˚로 고정하여 잇수 30∼100개 압력각 14˚∼30˚의 범위에서 최소 원호반경식과 치형 조건을 만족하는 최대 원호반경식에 대하여 고찰하였다.