Browse > Article
http://dx.doi.org/10.9726/kspse.2014.18.1.022

The Performance Assessment of a Straight-Type Five-Hole Pressure Probe Using a Zone Partition and Two-Dimensional Curve-Fitting Functions  

Kim, Jang-Kweon (Department of Power System Engineering, Kunsan National University)
Oh, Seok-Hyung (School of Mechanical Engineering, Kunsan National University)
Publication Information
Journal of Power System Engineering / v.18, no.1, 2014 , pp. 22-31 More about this Journal
Abstract
This paper introduced the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new velocity data reduction method using both a commercial two-dimensional curve-fitting program and the zone partition method of a calibration map was firstly introduced in this study. This new calibration method can be applied up to the wide flow angle of ${\pm}80^{\circ}$ despite of using a five-hole pressure probe because this data reduction method showed a comparatively good performance in calculating yaw and pitch angles from the calibration map.
Keywords
Calibration Map; Five-Hole Pressure Probe(FHPP); None-Nulling Method; Pitch Angle; Pitch Coefficient; Two-Dimensional Curve-Fitting; Velocity Data Reduction; Yaw Angle; Yaw Coefficient; Zone Partition Method;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 R. W. Gallington, 1980, "Measurement of Very large Flow Angles with Non-Nulling Seven Hole Probe", Aeronautics Digest, USAFA-TR-80-17, pp. 60-88.
2 K. N. Everett, A. A. Gerner and D. A. Durston, 1983, "Seven-Hole Cone Probes for High Angle Flow Measurement : Theory and Calibration", AIAA J., Vol. 21, No. 7, pp. 992-998.   DOI   ScienceOn
3 A. A. Gerner, C. L. Maurer and R. W. Gallington, 1984, "Non-Nulling Seven-Hole Probes for High-Angle Flow Measurement", Exp. in Fluids, Vol. 2, pp. 95-103.   DOI
4 G. G. Zilliac, 1993, "Modelling, Calibration, and Error Analysis of Seven-Hole Pressure Probes", Exp. in Fluids, Vol. 14, pp. 104-120.   DOI
5 C. W. Wenger and W. J. Devenport, 1999, "Seven-Hole Pressure Probe Calibration Method Utilizing Look-Up Error Tables", AIAA J., Vol. 37, No. 6, pp. 675-679.   DOI   ScienceOn
6 G. L. Morrison, M. T. Schobeiri and K. R. Pappu, 1998, "Five-Hole Pressure Probe Analysis Technique", Flow Meas. and Inst., Vol. 9, pp. 153-158.   DOI   ScienceOn
7 SYSTAT Software Inc., 2002, TableCurve 3D User's Manual, Ver.4 for Windows.
8 J. K. Kim, S. H. Oh and K. J. Jeong, 2006, "Measurement System Development for Three- Dimensional Flow Velocity Components Using Straight-Type Five-Hole Pressure Probe", J. of the KSPSE, Vol. 10, No. 4, pp. 56-64.   과학기술학회마을
9 O. K. Rediniotis and R. Vijayagopal, 1999, "Miniature Multihole Pressure Probes and Their Neural-Network-Based Calibration", AIAA J., Vol. 37, No. 6, pp. 666-674.   DOI   ScienceOn
10 S. O. Kjelgaard, 1988, "Theoretical Derivation and Calibration Technique of a Hemispherical- Tipped Five-Hole Probe", NASA Technical Memorandum 4047.
11 J. K. Kim and S. H. Oh, 2008, "A New Calibration Algorithm of a Five-Hole Pressure Probe for Flow Velocity Measurement", J. of the KSPSE, Vol. 12, No. 4, pp. 18-25.   과학기술학회마을
12 A. L. Treaster and A. M. Yocum, 1979, "The Calibration and Application of Five-Hole Probes", ISA Trans., Vol. 18, No. 18, pp. 23-34.
13 A. M. Judd, 1975, "Calibration of a Five Tube probe for Measuring Wind Speed and Direction", J. of Physics E : Sci. Inst., Vol. 8, pp. 115-116.   DOI
14 C. Venkateswara Babu, M. Govardhan and N. Sitaram, 1998, "A method of Calibration of a Seven-Hole Pressure Probe for Measuring Highly Three-Dimensional Flows", Meas. Sci. Technol., Vol. 9, pp. 468-476.   DOI   ScienceOn
15 J. K. Kim and S. H. Kang, 1997, "Full Angle Range Pressure Coefficient Maps of Five-Hole Probe and New Calibration Coefficients", Trans. of the KSME, Vol. 21, pp. 1437-1448.   과학기술학회마을