• ETRI Journal
• /
• 제28권4호
• /
• pp.486-494
• /
• 2006

Two current-mode and/or voltage-mode quadrature oscillator circuits each using one fully-differential second-generation current conveyor (FDCCII), two grounded capacitors, and two (or three) grounded resistors are presented. In the proposed circuits, the current-mode quadrature signals have the advantage of high-output impedance. The oscillation conditions and oscillation frequencies are orthogonally (or independently) controllable. The current-mode and voltage-mode quadrature signals can be simultaneously obtained from the second proposed circuit. The use of only grounded capacitors and resistors makes the proposed circuits ideal for integrated circuit implementation. Simulation results are also included.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.31-33
• /
• 1989

In this paper, a short primary-short secondary single-sided LIM which is used as a driving source for automatic conveyor system, is selected as a analysis model. And with a method for analyzing eddy current distribution and thrust force which are produced according to the relative position of primary and secondary, FEM in which current vector potential is introduced is adopted. Also, analysis results are compared with experimental results, so propriety of this at study is proved.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.453-461
• /
• 1990

In this paper, a short primary-short secondary single-sided linear induction motor which is used as the driving source for an automatic conveyor system, is selected as an analysis model. The finite element method in which the current vector potential is introduced is adopted to analyze the eddy current distribution and thrust force which are produced according to the relative position of the primary and the secondary. Also, the analysis results are compared with experimental ones, to show the propriety of this model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.861-863
• /
• 2005

The current-mode circuit technique to design a bi-directional current transceiver for remote control systems and telemetering systems is presented in this paper. The proposed transceiver can transmit and receive the industrial standard current signal 4-20mA at the same time using two wires connection. The realization method is based on a second generation current conveyor (CCII) and a current mirror, which can be implemented using a commercially available device. To demonstrate the performance of the proposed scheme, the transceiver was simulated by the use of the PSPICE analog simulation program. The simulation results verifying the circuit performance are agreed with the expected values. The crosstalk of the proposed transceiver of about .63dB is observed.

• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.103-112
• /
• 2012

최근 우리나라가 선진국대열에 들어서고 생활수준이 높아지면서 건설 산업에서는 높은 인건비와 노무자의 부족으로 인해 외국인 노동자의 비중이 점차 늘어나고 있는 실정이다. 모듈러 공법은 전체공정의 50%~90%를 공장에서 제작하여 이것을 운반한 후 현장에서 설치하는 공법으로 현장에서 공정을 최소화하여 공기를 단축하고 품질을 향상시킬 수 있으며, 현장 공기의 단축으로 인건비 절감에 효과적이다. 현재 국내 모듈러는 2003년 신기초등학교를 시작으로 군 병영시설에 확대 적용되고 있지만 모듈러 공법의 장점인 짧은 공사기간과 낮은 비용의 제작은 이루어지지 않는 실정이다. Toyota 자동차 생산방식인 컨베이어시스템 방식을 모듈제작공정에 도입함으로써 자동화생산과 시간, 인력의 소모량을 크게 단축할 수 있고 이에 따라 생산 비용과 품질, 공기 향상으로 시장의 활성화를 기대할 수 있다. 따라서 본 연구는 실제 국내 모듈러 공법 프로젝트를 통하여 공장생산방식의 문제점 해결을 위해 컨베이어시스템 적용방법을 제시하고 적용한 컨베이어시스템의 수익성 분석을 하고자 한다. 제작 모듈의 형태에 따라 다르지만 본 연구의 실험모듈을 기준으로 일일 생산량 7.36개를 기준으로 투자 회수 기간까지 20개월이 소요 된다.

• 조명전기설비학회논문지
• /
• 제14권3호
• /
• pp.29-37
• /
• 2000

본 논문에서는 TMS320C32 DSP를 사용하여 저속에서 구동되는 반송용 펀측식 전행 유도전동기의 슬립 각 주파수에 의한 벡터제어를 이용하여 추력제어하였다. 먼저, 반송용 편촉식 선형 유도전동기를 설계 및 제작하고, 이를 해석하였다. 저속에서 제풍의 운반시에 안정성있은 구동올 위해서 벡터제어에 의한 추력제어를 하였고, 정위치 제어를 하기 워해서 Ziegles- Nichols법을 이용하여 PiD제어기를 설계하였다. 저속에셔의 종량부하흘 갖는 반송용 선형기기에서 PID제어기에 추력제어가 가능한 벡터제어기법을 부가한 결과는 제품외 운반시에 안정성있는 구동을 하였으며, 정위치제어를 위한빠른 응답특쟁 및 soft start/stop을 이루었으며, 부하 변동시에도 제동시에 정위치제어를 위한 빠른 응탑 특성의 결과를 얻었다.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.577-582
• /
• 2016

전류 컨베이어를 사용하는 카운터 타입의 동기형 시간-디지털 변환기를 공급전압 3volts에서 $0.18{\mu}m$ CMOS 공정을 이용하여 설계하였다. 비동기 시간-디지털 변환기의 단점을 보완하기 위해 클록은 시작신호가 인가되면 시작신호와 동기화되어 생성된다. 비동기형 시간-디지털 변환기에서 디지털 출력 값의 에러는 클록주기인 $-T_{CK}$에서 $T_{CK}$이다. 그러나 동기형 시간-디지털 변환기의 경우 에러는 0에서 $T_{CK}$이다. 시작신호와 클록의 동기화로 인하여 시간간격 신호를 디지털 값으로 변환할 때 출력 값의 에러 범위는 감소한다. 또한 고주파의 외부 클럭을 사용하지 않음에 따라 회로의 구성이 간단하다. 설계된 시간-디지털 변환기의 동작은 HSPICE 시뮬레이션을 통하여 확인하였다.

• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.633-644
• /
• 2003

The distribution and abundance of Antarctic krill (Euphausia superba), particularly in the South Atlantic, has traditionally been viewed as primarily determined by the flow of the Antarctic Circumpolar Current. Krill are viewed as being particles on a conveyor belt that carries them around the Antarctic continent resulting in a single circumpolar population. The evidence to support this viewpoint is largely circumstantial and there is very little direct evidence available of krill being moved by the currents-krill flux. There is also considerable biological and physical evidence which suggests that other factors may play a dominant role in the life history and distribution of krill. This review examines the evidence fur krill flux and also examines evidence that does not accord with this theory. The management implications of assuming krill flux are outlined and some lines for future research are suggested.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.635-643
• /
• 2016

Improvements were made in the study for the design of the conventional Eddy Current Separator (ECS) used for separating small sized non-ferrous particles in the waste. These improvements include decreasing the air gap between the material and magnetic drum, making the drum position adjustable and placing the splitter closer to the drum. Thus, small particles were separated with high efficiency. The magnetic drum was removed from inside the ECS conveyor belt system as design change and was placed as a separate unit. Hence, the force generated on the test material increased by about 5.5 times while the air gap between the non-ferrous materials and drum decreased from 3 mm to 1 mm. The non-metal material in the waste is separated before the drum in the novel design. Whereas non-ferrous metal particles are separated by falling into the splitter as a result of the force generated as soon as the particles fall on the drum. Every material that passes through the drum can be recycled as a result of moving the splitter closer to the contact point of the drum. In addition, the drum can also be used for the efficient separation of large particles since its position can be adjusted according to the size of the waste material. The performance of the novel design ECS was verified via analytical approaches, finite element analysis (FEA) and experimental studies.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.124-133
• /
• 2017

In the current lighting market, LEDs that have a high luminous efficiency, a long life and consume less power have emerged as next generation lighting. Owing to various designs and sizes of LEDs, the production process of existing LEDs involves many tasks that require manual labor; hence, the assembly of LEDs necessitates manpower. Because of the use of manpower, the production costs of LEDs increases and production efficiency decreases. Recently, the assembly parts of LEDs have been standardized for minimizing manual labor, and an LED is developed as an LED panel. The automatic assembly system produces LED convergent lighting by assembling two LED panels and one diffusion cover. To increase the production efficiency of the LED convergent lighting module, it is important that the development of a feeder can continuously supply the LED panels is required, and whose design has sufficient stability. The automatic assembly system of the LED convergent lighting module consists of two feeders, which convey LED panels and diffusion covers to a main conveyor, which assembles the lifted panels and covers. In this study, structural analysis and fatigue life for forced loads on the conveyer line of the feeder in the process of lifting LED panels and diffusion covers of each feeder, is analyzed. In addition, the drive of the belt constituting the conveyor line of each feeder is simulated, and the dynamic characteristics of the belt is analyzed using the virtual engineering method.