• Korean Journal of Plant Resources
• /
• v.33 no.6
• /
• pp.624-637
• /
• 2020

High-quality and high-phytonutrient watermelon fruits have strong market opportunities besides their health related benefits. Hence, investigating quality and nutritional related traits of watermelon genetic resources could provide important baseline data in breeding for increased lycopene content thereby increasing the marketability of watermelon. To this end, we have examined some fruit morphological traits and lycopene content of 105 genetic resources. Seeds, originally obtained from 22+ countries, were obtained from the National Agrobiodiversity Center, Jeonju, South Korea, grown in an experimental field and harvested at a fully mature stage. The size of pistil scar (SPS), the width of stripes (WS), weight of fruit (WF), length of fruit (LF), width of fruit (WIF), the thickness of pericarp (TP), soluble solids content (SSC), fruit shape in longitudinal section, ground color of skin, the intensity of the green color of skin, fruit shape at the apical part, grooving distribution, conspicuousness of stripes, and main color of the flesh were recorded on the field and inside laboratory and the lycopene was measured using spectrophotometric and HPLC methods. Watermelon fruits have shown a diverse morphological characters. Red and pink fleshed fruits dominated in the entire collections. Fruits with higher thickness of rind were found to exhibit less soluble solid content (SSC). Korean origin fruits were characterized by intermediate SSC while the United States of America (USA), Russia (RUS), Tajikistan (TJK), Turkmenistan (TKM), Taiwan (TWN), and Uruguay (URY) originated fruits had the highest SSC. The lycopene content varied between 41.37 and 182.82 ㎍/g, 2.81 and 163.72 ㎍/g, and 3.54 and 255.47 ㎍/g using HPLC, UV-Vis spectrophotometer, and microplate reader spectrophotometer, respectively. Red- and pink-fleshed fruits had the highest levels of lycopene content compared to the yellow- and orange-fleshed. Lycopene content had a significant positive correlation with SSC, however, no correlations were detected between lycopene and other quantitative fruit morphological characters. Our study demonstrated high diversity exists in fruit morphological traits and lycopene content of the germplasm collections which provide beneficial baseline data for a future breeding program and utilization of watermelon germplasm collections in gene banks for the maintenance and improvement of the current levels of production, marketability, and health-related benefit of watermelon fruits.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.2
• /
• pp.121-126
• /
• 2015

In general, the pearlescent pigment is a pigment which was used for optical characteristics like pearl, rainbow and metallic luster. Titanium dioxide coated mica plate developed by DuPont in 1965 is currently being used as a main part of pearlescent pigment for cosmetics. Although the smooth and clear surface substrate laminated with 2 ~ 3 ingredients is thicker than a previous monolayer coated substrate, it has been applied for cosmetics as the optical interference powder to realize stronger shine and brighter interference color than monolayer one. In this study, we developed a new optical interference powder with thinner and higher chroma than a current pearlescent pigment for the strong luster and bright interference color. It was prepared from the manufacturing process, in which the coated titanium dioxide precursor was changed and crystallized by coating and heat treatment process with a half of dividing the coated amount of titanium dioxide. We confirmed the dense coating of titanium dioxide grain with Scanning Electron Microscope and measured superior crystallization degree compared with a monolayer coated pearlescent pigment by X-ray Diffraction. It is concluded that our new pearlescent pigment had higher reflectivity of light and stronger interference color than previous products.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.407-413
• /
• 2023

The purpose of this study is to provide basic information about various methods to easily affix unique embroidery effects to clothes due to the current expansion of digital fashion technology. A comparison of design techniques using virtual and real clothing was used to show the visual expression of embroidery designs. Actual embroidery motifs were created using a computer embroidery machine, DTP embroidery motifs were made by utilizing digitalization techniques, and digital motifs were produced. Then patch pocket type T-shirts were produced using each embroidery technique to compare the visual expression effects on clothing. The results of this comparison are as follows: for real clothing color (3.5), texture (4.0), gloss (3.8), and thickness (3.5). It was found that the color and thickness of the embroidery floss was visually sufficiently show the design texture and gloss. In terms of the embroidery design on virtual garments, the resutls of color (3.8), texture (4.3), gloss (3.9), and thickness (3.6) showed a high degree of similarity to the non-virtual results, confirming that digitized embroidery motifs are also a tool that can fully realize unique embroidery effect.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2023

In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1418-1427
• /
• 2024

Objective: This study aimed to investigate the efficacy of Bacillus-based probiotics supplemented at two different levels to modulate the productive performance, egg quality, tibia traits, and specific cecal bacteria counts of Hy-Line Brown layers from 25 to 37 weeks of age. Methods: A total of 216 twenty-five-week-old hens were randomly distributed into 3 experimental diets with 12 replicates of 6 birds per cage. Diets included basal diet supplemented with 0 (CON), 3×10⁸ (PRO1), or 3×10⁹ (PRO2) colony-forming unit (CFU) of the test probiotic containing Bacillus subtilis PB6, Bacillus subtilis FXA, and Bacillus licheniformis G3 per kilogram of feed. Results: Improved egg weights and mass at 29 weeks; and feed intake at 31 weeks (p<0.10) were noticed with the probiotic-supplemented PRO1 and PRO2 diets. Considering egg quality, the shell thickness, Haugh units, and yolk color were improved; but yolk cholesterol was lowered (p<0.05) with PRO1 and PRO2 diets at 29 weeks. At both 33 and 37 weeks, the egg-breaking strength, shell color and thickness, albumen height, Haugh units, and yolk color were improved; but yolk cholesterol was similarly lowered (p<0.05) with the PRO1 and PRO2 diets. Improved tibia Ca, ash, weights, and density; and raised cecal counts of Bifidobacteria and Lactobacilli (p<0.05) were noticed with PRO1 and PRO2 diets. Improved tibia P but reduced Clostridia counts (p<0.10) were also observed with the PRO1 and PRO2 diets. Conclusion: Probiotic supplementation of Bacillus subtilis PB6, Bacillus subtilis FXA, and Bacillus licheniformis G3 at 3×10⁸ CFU/kg of feed is adequate to significantly improve egg quality, lower yolk cholesterol, enhance several tibia traits, and raise the populations of beneficial cecal bacteria. Modest improvements in several productive parameters and tibia P but reduced Clostridia were also observed; and could warrant further investigation of probiotic effects beyond the current test period.

• Archives of design research
• /
• v.13 no.3
• /
• pp.111-122
• /
• 2000

To achieve the advertising objectives, we must first draw out consumer's advertisingto advertising, and then realize the data processing course from comprehension to the retention of the advertising contents. In current media environment, however, the value of advertising as the method of attracting consumer's attention is declining due to the current situation of newspaper and magazine advertising as follows. As for newspapers, competitive messages are increasing on a continuous basis; the size of advertising section and the number of newspaper pages has been increased along with the popularization of color advertising. As for magazines, more pages are allocated for advertising rather than for the actual contents. In such communication environment, it is believed that only the advertising capable of uniquely appealing to consumers can achieve the purpose of advertising. Hence, this research attempts to discuss the effective ways of promoting attention in print media through the case studies covering the design principles relating to layout and the layout format, among the visualization processes related to the consumers'memory.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1844-1858
• /
• 2010

Ethnical tendency follows the current political, economical, and cultural influence eastwards, highlighting films, architecture and interiors as well as fashion. With this tendency, the ethnic outfits are expressed by various styles. This study analyzes the features of current ethnic styles with 1,535 ethnic image pieces from 2005 S/S to 2010 F/W of Pr${\^{e}}$t-${\'{a}}$-Porte in Paris and Milan. First, 'ethnic' is to refer to the distinct features of an ethnic group or a country. 'Ethnic look' refers to the adaptation or re-arrangement of various ethnic group's traditional costumes, dying, textile, patterns, color, silhouettes, and accessories. Second, the most popular ethnics in the modern fashion is the African style, followed by India, Japan, China, and Latin America in both collections. Third, the proportion of ethnics decreased, 2005 (14.9%), 2006 (12.8%) and 2007 (8.2%). In 2008 the proportion increased again. 2010 (27.3%) and compared 2010 to 2007, it increased by 20%. By season, S/S had 1.4 times more ethnic styles than F/W with the prevalence of African and Indian styles. Fourth, as of 2005, the ethnic style became colorful and went through changes to combine various images. This is from the polycentric tendency of co-existing various styles with a prevalence of low tone and various colors. It also shows warm colors in front to show a sense of nature.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.181-186
• /
• 2007

We have investigated and analyzed the effects of the evaporation rate of MgO films on the MgO properties and the discharge characteristics of a plasma display panel(PDP). The MgO properties such as the crystal orientation, the surface roughness, the film structure, and cathode-luminescence (CL) spectra were inspected using XRD (X-ray diffraction), AFM(atomic force microscopy). And the discharging characteristics of the PDP such as the firing voltage, discharging current, and luminescence were measured using a vacuum chamber with oscilloscope (TDS 540C), current probe (TCP-312A), color meter (CS-100A) and etc. From the experiments results we confirmed the optimum evaporation rate at $5{\AA}/sec$, the MgO properties were shown to be strongly dependent on the evaporation rate, and the MgO properties had an effecton the optical and electrical characteristics. In other words, if the evaporation rates increase than $5{\AA}/sec$, the intensity of (200) orientation and cathode-luminescence (CL) spectra reduce, and the firing vlotage was increased. So the luminuous efficiency grows worse.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.517-524
• /
• 2013

The electrical and optical properties of fluorine-doped tin oxide films grown on polyethylene terephthalate film with a hardness of 3 using electron cyclotron resonance plasma with linear microwave of 2.45 GHz of high ionization energy were investigated. Fluorine-doped tin oxide films with a magnetic field of 875 Gauss and the highest resistance uniformity were obtained. In particular, the magnetic field could be controlled by varying the distribution in electron cyclotron deposition positions. The films were deposited at various gas flow rates of hydrogen and carrier gas of an organometallic source. The surface morphology, electrical resistivity, transmittance, and color in the visible range of the deposited film were examined using SEM, a four-point probe instrument, and a spectrophotometer. The electromagnetic field for electron cyclotron resonance condition was uniformly formed in at a position 16 cm from the center along the Z-axis. The plasma spatial distribution of magnetic current on the roll substrate surface in the film was considerably affected by the electron cyclotron systems. The relative resistance uniformity of electrical properties was obtained in film prepared with a magnetic field in the current range of 180~200A. SEM images showing the surface morphologies of a film deposited on PET with a width of 50 cm revealed that the grains were uniformly distributed with sizes in the range of 2~7 nm. In our experimental range, the electrical resistivity of film was able to observe from $1.0{\times}10^{-2}$ to $1.0{\times}10^{-1}{\Omega}cm$ where optical transmittance at 550 nm was 87~89 %. These properties were depended on the flow rate of the gas, hydrogen and carrier gas of the organometallic source, respectively.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.971-976
• /
• 2013

This study provides insight into current social media influences and purchasing power of the young generation in that the size of both of these demographic groups will impact the apparel companies and retail market for the predictable future Denim apparel companies are aware of the discretionary spending power of the Y and Z Generations. The characteristics of current teens are so similar to college-age individuals in that they have grown up with digital technology and they prefer to communicate via social networking sites. Retailers have utilized these social media platforms in order to capture the attention of the generations. Traditionally marketing campaigns have differentiated between teens and the college-age population. However, the teens actually have larger spending power and more discretionary income. A survey consisted of 32 questions pertaining to Internet media influences, influence of people, and decision factors on decisionmaking related to purchasing selection. A random sampling of 163 females responded to a set of questionnaires. Teens, like college students desire to make their own decisions when they select and purchase denim jeans. Overall 40% of them wanted to make their own decisions when purchasing their jeans, however, a significant number are influenced by their friend's opinions (34%) and the opinions of family members (15%). However, celebrities (10%) had the least influence on their decisions. Teens, like colleges students make decisions based on the same decision factors: fit (63%), cost (23%), brand (10%) and color (2%). The most important factor in determining preference was "fit".