• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.21-32
• /
• 2016

Studies have observed various phenomena regarding the effect of the interaction between type, price, and brand image of a product on consumers' purchase intent and product quality perception. Yet, few have studied the effect of the interaction between product type and manufacturing method on these factors. However, the advent of three-dimensional (3D) printers added a new manufacturing method, 3D printing, to the traditional methods of handicraft and automated machine-based production, and research is necessary since this new framework might affect consumers' purchase intent and product quality perception. Therefore, this study aimed to verify the effects of the interaction between product type and manufacturing method on purchase intent and product quality perception. To achieve this, in our experiment 1, we selected product types with different characteristics (drone vs. violin vs. cup), and measured whether consumers preferred different manufacturing methods for each product type. The results showed that consumers preferred the 3D printing method for technologically advanced products such as drones, the handmade method for violins, and the automated machine-based manufacturing method, which allows mass production, for cups. Experiment 2 attempted to verify the effects of the differences in manufacturing method preferences for each product type on consumers' purchase intent and product quality perception. Our findings are as follows: for drones, the purchase intent was highest when 3D printing was used; for violins, the purchase intent was highest when the violins were handmade; for cups, the purchase intent was highest when machine-based manufacturing was used. Moreover, whereas the product quality perception for drones did not differ across different manufacturing methods, consumers perceived that handmade violins had the highest quality and that cups manufactured with 3D printing had the lowest quality (the purchase intent for cups was also lowest when 3D printing was used). This study is anticipated to provide a wide range of implications in various areas, including consumer psychology, marketing, and advertising.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.93-104
• /
• 2015

As interest grows in nursing-wear in accordance with dissemination of breast-feeding, a study on opening of nursing-wear is needed to enhance convenience of breast-feeding regardless of location. In this study, the items on nursing-wear were classified and each characteristic was analyzed. The types and characteristics of opening on nursing-wear were identified and the characteristics of nursing brassier closely related to the nursing-wear were also identified. Top 5 companies for the nursing-wear and nursing-brassier were selected by ranking top 5 in NAVER with the search word 'nursing-wear' and 'nursing-brassier'. 732 one-piece and top (t-shirt and blouse) which have the highest portion in the nursing-wear were selected as the subject. Based on the photo, product explanation on the internet and in-depth interview of designer, the types and characteristics of openings for each item were identified. 732 nursing-brassier were selected to study the types and openings in breast-feeding. The result is as follows. Firstly, the item of nursing-wear can be classified into top, one-piece, package of top and the bottom, and sleeveless. Top and one-piece have the highest production rate. Secondly, the types of the openings are either covering or opening types. There are vertical-slit and horizontal-slit in covering type, and vertical-zipper, horizontal-zipper, and button types in opening type, and overlap and pocket type for the rest. Thirdly, the commercially available nursing-brassier according to the opening manner can be classified into upper-opening, middle-opening, and overlap types. Most largely produced product is upper-opening type as it minimizes the exposure of the breast in breast-feeding. When producing the nursing-brassier, the measurement of the lower breast and cup size are considered.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.343-362
• /
• 2024

Eurycoma longifolia (pasak bumi) is a popular medicinal plant in Indonesia and is widely used in various products. Its high economic value has caused illegal harvesting and product falsification. Using molecular techniques, the authentication and traceability of E. longifolia derivatives can be controlled to ensure consumer safety. Therefore, this study aimed to authenticate the products and derivatives of E. longifolia (pasak bumi) produced, marketed, and consumed in Indonesia using molecular identification techniques. Genomic DNA from 37 leaf samples collected from the Sumatran mainland and the Riau Islands and six E. longifolia products were amplified and sequenced using trnL-trnF and internal transcribed spacer (ITS) regions. The results revealed that all leaf samples were indeed E. longifolia based on the markers used, with the six products, only the herbal tea product (sample code TCPB) was most likely derived from E. longifolia based on the two regions, suggesting that not all products labelled as E. longifolia in the market are authentic. The results also indicated that several other plants species are used as substitutes or adulterants, including Simaba spp., Simarouba spp., Homalolepis spp., Vernonia gigantea, Elephantopus scaber, Gymnanthemum amygdalinum, Cyanthillium spp., Potentilla lineata, Ailanthus altissima, Geijera paniculata, Hannoa chlorantha, and Dalbergia spp. Klebsiella pneumoniae bacteria were also identified in this study on the outer wooden cup of E. longifolia products. Therefore, this molecular approach is effective in identifying the authenticity of E. longifolia products, with trnL-trnF and ITS as the recommended DNA markers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.600-603
• /
• 2000

In the high carbon steel wire drawing process, the wire temperature increases as the drawing speed is faster in order to increase the production rate in the shop floor. The rapid temperature rise causes the wire fracture in the dry wire drawing process. So, in this paper, the isothermal pass schedule program, which includes the calculation method of wire temperature at each pass, is proposed to prevent the wire fracture due to the temperature rise. Using the isothermal pass schedule program, it is newly proposed the pass schedule design system that prevents the cup-cone defects, improves the elongation of the final products and assures further deformation. As a result, the temperature rise of the wire was decreased and the production rate of the final product is remarkably grown up according to the increase of the final drawing speed than that of the conventional process. Also, the proposed pass schedule design system could give a useful information to the process designer who would design the high carbon steel wire drawing process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.5130-5143
• /
• 2019

Football (soccer) is one of the most popular sports in the world. A huge number of people watch live football matches by TV or Internet. A football match takes 90 minutes, but viewers may only want to watch a few highlights to save their time. As far as we know, there is no such a product that can be put into use to achieve intelligent highlight extraction from live football matches. In this paper, we propose an intelligent editing system for live football matches. Our system can automatically extract a series of highlights, such as goal, shoot, corner kick, red yellow card and the appearance of star players, from the live stream of a football match. Our system has been integrated into live streaming platforms during the 2018 FIFA World Cup and performed fairly well.

• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.668-675
• /
• 2002

The circles deform into various shape during deformation, the major and minor axes of which indicate the direction of the major and minor principal strains. Likewise, the measured dimensions are used to determine the major and minor principal strain magnitudes. This circular grid technique of measuring strains can be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, of incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.3
• /
• pp.375-382
• /
• 1997

This study was performed to evaluate the nutrient intake status according to coffee intake among Korean female college students. Two-hundred subjects were asked for their daily coffee intake using a questionnaire. Daily intakes of nutrients and food groups were calculated 3-day food records. The mean height and weight of the subjects were 161.6cm and 51.2kg. The mean daily intake of coffee and milk were 0.5 and 0.6 cups, respectively. When nutrient intake was compared to RDA for Koreans, intakes of energy, iron, vitamin A were short of recommendations. The mean intakes of calcium, sodium, vitamin B$_2$ in BMI＜20 group were significantly higher than those in BMI $\geq$20 group. The mean intakes of calcium and phosphorous in no-coffee group were significantly higher than those in $\geq$2 cup-coffee group. The mean intake of beverage and others significantly increased as the level of coffee intake was increased. However, intake of milk and its product decreased. There were significantly negative correlation between coffee and calcium intake, and positive correlation between milk and calcium intake. These results indicate that coffee consumption decreases calcium intake because of decrement of milk and its products. Therefore, it could be suggested that there is increased need for nutritional education on proper eating patterns for female college students.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.292-296
• /
• 2013

The ultrasonic wind sensor that pass through the air, beating the delivery of ultrasonic wind speed increases or decreases by the physical characteristics of the wind speed and the direction of the sensor, the transmission and reception of ultrasonic time difference measured by a two-axis vector wind and wind speed measured by calculating a device that converts the digital signal is Anemometer and wind direction meteorological facilities management, management of the ship sail used for various purposes, including, but used the existing 3-cup (mechanical) anemometer wind rotor caused by mechanical wear parts replacement due to the short-term, the reliability of the product is low, parts replacement, and according to the characteristics caused the car, there is a problem in high maintenance costs. In addition, because the bearings use of the marine environment and the cryogenic environment was constrained. In this study, the excellent long-term reliability, using ultrasonic-type environment that is not constrained to produce wind anemometer located $90^{\circ}$ conformal road using four piezoelectric sensors were fabricated structures, the piezoelectric oscillator circuit produces a rash and receiving transmit and receive speeds the car through the two-axis vector calculation to measure wind velocity processor firmware programming, and its characteristics were tested.

• Natural Product Sciences
• /
• v.13 no.4
• /
• pp.279-282
• /
• 2007

The aim of the present study was to investigate the various chemical components present in the cone volatile oil of Cupressus macrocarpa and also determine its antimicrobial activity. Totally 13 compounds were identified with 99.99% by GC-MS analysis. The major compounds identified were terpinene-4-ol (19.42%), dinopol (15.63%), ${\alpha}$-pinene (13.58%), and ${\beta}$-pinene (12.16%). The antimicrobial activity was carried out for the oil and a 2% cream formulation using cup plate method by measuring the zone of inhibition. The gram positive organisms used were Bacillus subtilis, Staphylococcus aureus, Bacillus megaterium, and Bacillus cogulans. The gram negative organisms used were Escherichia coli, Kleibseilla pneumonia, Pseudomonas aeruginosa and Salmonella typhi. In vitro antifungal studies were also carried out by using organisms, Candida albicans, Aspergillus flavus, Trichoderma lignorum and Cryptococcus neoformans. The standard drugs used were penicillin ($100{\mu}g/mL$), gentamycin ($100{\mu}g/mL$) and griseofulvin ($100{\mu}g/mL$) for gram positive bacteria, gram negative bacteria and fungi respectively. Both oil and cream formulation showed good activity against fungi than bacteria. This study is being reported for the first time on cone volatile oil of this plant.

• Journal of the Korean Mathematical Society
• /
• v.36 no.4
• /
• pp.787-811
• /
• 1999

Let M be the maximal ideal space of the Banach algebra $H^{\infty}$ of bounded analytic functions on the open unit disc $\triangle$. For a positive singular measure ${\mu}\;on\;{\partial\triangle},\;let\;{L_{+}}^1(\mu)$ be the set of measures v with $0\;{\leq}\;{\nu}\;{\ll}\;{\mu}\;and\;{{\psi}_{\nu}}$ the associated singular inner functions. Let $R(\mu)\;and\;R_0(\mu)$ be the union sets of $\{$\mid$\psiv$\mid$\;<\;1\}\;and\;\{$\mid${\psi}_{\nu}$\mid$\;<\;0\}\;in\;M\;{\setminus}\;{\triangle},\;{\nu}\;\in\;{L_{+}}^1(\mu)$, respectively. It is proved that if $S(\mu)\;=\;{\partial\triangle}$, where $S(\mu)$ is the closed support set of $\mu$, then $R(\mu)\;=\;R0(\mu)\;=\;M{\setminus}({\triangle}\;{\cup}\;M(L^{\infty}(\partial\triangle)))$ is generated by $H^{\infty}\;and\;\overline{\psi_{\nu}},\;{\nu}\;{\in}\;{L_1}^{+}(\mu)$. It is proved that %d{\theta}(S(\mu))\;=\;0$ if and only if there exists as Blaschke product b with zeros $\{Zn\}_n$ such that $R(\mu)\;{\subset}\;{$\mid$b$\mid$\;<\;1}\;and\;S(\mu)$ coincides with the set of cluster points of $\{Zn\}_n$. While, we proved that $\mu$ is a sum of finitely many point measure such that $R(\mu)\;{\subset}\;\{$\mid${\psi}_{\lambda}$\mid$\;<\;1}\;and\;S(\lambda)\;=\;S(\mu)$. Also it is studied conditions on \mu for which $R(\mu)\;=\;R0(\mu)$.