• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.39-46
• /
• 2019

This paper investigates the importance of various environmental factors that have a strong influence on strawberry yields grown in greenhouse using the pattern recognition methods. The environmental factors influencing the production of strawberries were six factors such as average inside temperature, average inside humidity, average $CO_2$ level, average soil temperature, cumulative solar radiation, and average illumination. The results of analyzing the observed data using Dynamic Time Warping (DTW) showed that the most significant factor influencing the strawberry production was average soil temperature, average inside humidity, and cumulative solar radiation. Second, the results of analyzing the observed data using Multidimensional Scaling (MDS) showed that the most influential factors on the strawberry yields, such as average $CO_2$ level, average inside humidity, and average illumination were differently given for each farms. However, these results are based on the distance in 3D space and can be deduced from the fact that there is not a large difference between these distances. Therefore, in order to increase the harvest of strawberries cultivated in the farms, it is necessary to manage the environmental factors such as thoroughly controlling the humidity and maintaining the concentration of $CO_2$ constantly by ventilation of the greenhouse.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2023

Buckling Restrained Braces can not only express the strength considered at the time of design, but also reduce the seismic load by energy dissipation according to the plastic behavior after yield deformation of the steel core. The physical characteristics and damping effect may be different according to the buckling prevention method of the steel core by the lateral restraint element. Accordingly, in this study, To compare hysteresis characteristics, Specimen(BRB-C) filled with mortar, specimen(BRB-R) combined with a buckling restraint ring and Specimen(BRB-EP) filled with engineering plastics was fabricated, and a cyclic loading test was performed. As a result of the cyclic loading test, the maximum compressive strength, cumulative energy dissipation and ductility of each test specimen was similar. But in case of the cumulative energy dissipation and ductility, BRB-C filled with the mortar specimen showed the lowest. This is considered to be because the gap between the steel core and the reinforcing material for plastic deformation was not uniformly formed by pouring mortar around the core part.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.630-635
• /
• 2000

Previous research has not evaluated the effects of various rates and frequencies of manure application and frequencies of cutting on yield and stand persistence of cool-season grasses and alfalfa-grass mixtures. The primary objective of this study was to compare the effects of cutting management systems on herbage yield and stand persistence of orchardgrass (Dactylis glomerata L.) and an alfalfa (Medicago sativa L.)-orchardgrass mixture from various rates and frequencies of dairy slurry application. A randomized complete block design with treatments in a sub-subplot arrangement with four replicates was used. The main plot consisted of 2 cutting management systems (4 and 5 annual cuttings). The subplots were 9 fertility treatments: 7 slurry rate and frequency of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The split-split-plots were the two forage species: orchardgrass and alfalfa-orchardgrass mixture. The study was initiated after 1st cutting in 1995. Cumulative yields of the 2nd and subsequent cuttings of both orchardgrass and alfalfa-orchardgrass in 1995 were higher for the 5-cutting system than the 4-cutting system. The 1995 growing season was abnormally dry. In 1996, an abnormally wet year, the reverse was true, total herbage yields being higher for the 4-cutting system than the 5-cutting system. Species response to fertility rate/frequency treatments was different in both years. Higher application rates early in the season and carryover of nutrients from late season applications the previous year appear to be responsible for the yield increases of those fertility treatments having significant yield differences between the cutting management systems. The stand ratings of orchardgrass were not affected by cutting management. In the spring of 1997, however, the stand ratings of alfalfa-orchardgrass in the 4-cutting management system were significantly greater than the 5-cutting management system. The very high manure application rate significantly reduced the stand ratings of alfalfa-orchardgrass in the 5-cutting system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.473-478
• /
• 2009

The purpose of this study is to evaluate the behaviour of the plastic deformed zone at crack tip on the standard Charpy specimens which were taken from the multi-passed weld block of the pressure vessel steel. Notch was machined on the standard Charpy test specimens and pre-crack which was located around the fusion line was made under the repeat load. Four point bend and acoustic emission tests were carried out simultaneously. The size of plastic region at crack tip was calculated using stress intensity factor. Relationships between characteristics of acoustic emission and plastic zone size at crack tip were discussed through the cumulative AE energy. Regardless of the specimens, AE signals were absent within the elastic region almost and most of AE signals were produced at the plastic deformation region from yield point to the mid-point between yield and maximum load. More AE signals for the weldment were produced compared with the base-metal and PWHT specimen. Relations between plastic deformed zones at crack tip and cumulative AE energy for the weldment and PWHT specimen were different quietly from the base-metal. Besides, number of AE counts for the weldment was the larger than those of the base-metal and PWHT specimen.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.2
• /
• pp.17-21
• /
• 2020

The response of honeybee (Apis mellifera L.) pollination on canola yield with reference to most suitable number of bee hive need per unit area of crops in order to meet optimum pollination needs and better economic yields by comparing number of hives and yield components an experiment was conducted at Beekeeping and Hill Fruit Pests Research, Station Rawalpindi during 2017-18 in complete randomized block design with two sets of four treatments for comparison: 1 hive acre^-1, 2 hives acre^-1, 3 hives acre^-1 and 0 hive acre^-1. The hives were kept inside the experimental area. Parameters were assessed: pollination density, pollinator's diversity, agronomic and economic yield. In case of pollination density, the cumulative mean abundance bee species revealed that at 1200 hours, Apis mellifera was the most abundant and frequent visitor with a mean population of 8.69 bees/plant followed by A. dorsata (0.72), Syrphid fly (0.2) and other pollinators. Minimum bee population was observed during 1400 hours, mainly due to the closure of flowers and partially due to high temperature (>35℃). Pollinator diversity revealed that A. mellifera was the most dominant pollinator of Brassica crop with highest abundance (71%). A. dosata ranked 2^nd (16%) followed by A. florea (6%) respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.71-79
• /
• 2016

The effects of spot heating for growing the strawberry cultivated in a plastic greenhouse during the winter that were estimated in Nonsan strawberry experiment station located in Chungnam. The temperature of water for heating was controlled by a electric hot water boiler and kept at the range of $22{\sim}24^{\circ}C$. Heating pipes were set up in root zone for root zone heating and very close to crown for crown heating. Spot heating effects were estimated by applying spot heating system in three test factors of heating root zone, crown only and crown plus root zone. The material for crown heating pipe was white low density polyethylene and the nominal diameter of that pipe was 16 mm. The material for root zone heating pipe was flexible stainless steel and the nominal diameter of that pipe was 15A. The flow rate of heating water circulation was 480 L/h and water circulation lasted for all day long. Temperatures, harvest yield by test beds were surveyed from Nov. 10, 2013 to Apr. 29, 2014. The temperature of crown spot for crown heating bed was at the range of $13.0{\sim}17.0^{\circ}C$ during the night and that of crown spot in control bed was at the range of $8.0{\sim}14.0^{\circ}C$. Also, the temperature of root zone for root zone heating bed was at the range of $18{\sim}21.0^{\circ}C$ and that of root zone in control bed was at the range of $13.0{\sim}15.0^{\circ}C$. The cumulative yield growth rate in earlier harvest period (from Dec. 20 to Mar. 15) of crown heating bed was 43% compared with that of control bed and the cumulative yield of crown plus root zone heating bed was 39 % and that of root zone heating bed was 39 %.

• Advances in environmental research
• /
• v.7 no.2
• /
• pp.73-85
• /
• 2018

The anaerobically digestion and agricultural application of organic wastes was conducted using food wastes and cow dung. Twenty kilograms each of the feed stocks was added into two 30 liters-capacity batch digesters. The anaerobic digestion was carried out within a temperature range of $25-31^{\circ}C$ for a retention time of 51 days. The results showed a cumulative gas yield of 5.0 bars for food waste and no gas production for cow dung within the retention time. Bacteria such as Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Proteus vulgaris and Clostridium sp were isolated. Fungi isolated included Aspergillus niger, Aspergillus nidulan, Trichophyton rubrum and Epidermophyton flocossum. The non-dispersive infrared (NDIR) analysis of the biogas produced confirmed that the gas consisted of $CH_4$, $CO_2$ and $H_2$. Statistical analysis revealed there was no significant correlation between temperature and biogas produced from the organic wastes (r= 0.177, p = 0.483).The organic wastes from the biogas production process stimulated maize growth when compared to control (soil without organic waste) and indicated maximum height. The study therefore reveals that food waste as potential substrates for biogas production has a moderate bio-fertilizer potential for improving plant growth and yield when added to soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.406-413
• /
• 2019

The purpose of this research was to analyze the effect of different sowing times on the flowering and maturing of major soybean cultivars by varying day length and temperature in the central plain region. The average of growth period and cumulative temperature in five test cultivars by sowing times were 121 days and 2,972℃ on June 1, respectively and gradually decreased to 85 days, 2,042℃, respectively on July 20. Analysis of the flowering response according to the sowing times showed that flowering was greatly influenced by the decrease of photoperiod until the sowing on July 10, and the minimum number of days for flowering were 27 days, 36 days, respectively in early and mid-rate maturing type in the central plain region. Daepung 2 is classified to the same ecotype with Daewonkong, the total number of growing days was not different between two cultivars, but ripening period (R2-R6) was longer by 5 days and yield was higher by 11% in Daepung 2. The maturity rate was also high and safe enough to maintain more than 90% through the entire sowing times. This ecological characteristic can be usefully applied as a section index for breeding environmental stress resistant and high yielding soybean varieties. The yield of 4 domestic cultivars (except TI196944) sowing on July 20 were 85~92% levels compared to sowing on June 20.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.3
• /
• pp.164-178
• /
• 2022

Uncertainties in weather forecasts would affect the reliability of yield prediction using crop models. The objective of this study was to compare uncertainty in crop yield prediction caused by the use of the weather forecast data. Daily weather data were produced at 10 km spatial resolution using W eather Research and Forecasting (W RF) model. The nearest neighbor method was used to downscale these data at the resolution of 5 km (W RF5K). Parameter-elevation Regressions on Independent Slopes Model (PRISM) was also applied to the WRF data to produce the weather data at the same resolution. W RF5K and PRISM data were used as inputs to the CROPGRO-SOYBEAN model to predict crop yield. The uncertainties of the gridded data were analyzed using cumulative growing degree days (CGDD) and cumulative solar radiation (CSRAD) during the soybean growing seasons for the crop of interest. The degree of agreement (DOA) statistics including structural similarity index were determined for the crop model outputs. Our results indicated that the DOA statistics for CGDD were correlated with that for the maturity dates predicted using WRF5K and PRISM data. Yield forecasts had small values of the DOA statistics when large spatial disagreement occured between maturity dates predicted using WRF5K and PRISM. These results suggest that the spatial uncertainties in temperature data would affect the reliability of the phenology and, as a result, yield predictions at a greater degree than those in solar radiation data. This merits further studies to assess the uncertainties of crop yield forecasts using a wide range of crop calendars.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.695-700
• /
• 2006

This study investigates the effects of the material properties and the fatigue behavior in the SM490A material specimens due to the low-temperature atmosphere. In the fatigue behavior, the low-temperature affects the fatigue life. As the temperature get low, the fatigue limit increase, also As the yield strength and the tensile strength increase, the impact absorbed energy decrease. The difference of fatigue lift represents to normal distribution and it is larger between the room temperature and the low temperature, but in the result of the cumulative density function, the effect of temperature is not too large on it.