• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.172-179
• /
• 1996

For mechanical systems operating at high tempertature, thermal fatigue phenomenon has been recognized as a major cause of mechanical component failures. To evaluate cumulative fatigue damage as a conesquence of thermal fatugue on real time, the stress tranfer function(Green's function) approach is popularly used. The objective of this paper is to investigate the effect of thermophsical properties on the stress tranfer function. For this purpose a modified Green's function approach considering temperature-dependent thermophysical properties is proposed. Two case studies were performed and the proposed approach agrees well with full finite element analysis.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.146-151
• /
• 1998

A study was carried our to investigate the characteristics of physico-chemical components palatability of cooked rice accoring to different transplanting time. The treatments were consisted of five transplanting time, from May 5 to July 5 at 15 -day intervals, and six cultivars ; two early-maturing, two mid-maturing and two late-maturing cultivars which are clearly identified by evaluation of cumulative temperature and growth duration from seeding to heading of rice plants. In gelatinization characteristics of rice grain, alkali digestion value was low in the earlier transplanting regardlessof maturing types. Initial pasting temeprature maximum viscosity and breakdown as amylogram charcteristics were high at the transplanting of June 5. The palatability of cookedrice was evaluated that early-maturing cultivars were much better in early transplanting than in late transplanting . The optimum transplanting time for palatibility was the periods from May 5 to 20 in early maturing varieties, May 20 to June 5 in mid-maturing and June 5 to June 20 in late-maturing ones at Honam district in Korea.

• The Korean Journal of Ecology
• /
• v.11 no.3
• /
• pp.123-130
• /
• 1988

The airborne pollens were studied by Durhan's pollen trap in Mt. Kwan-ak from March 1, 1984 to October 15, 1986. Most airborne pollens were found from late-March to late-September and few of them from early-November to late-February. Peak times of airborne pollens were found for one year as follows; First, from late-March to early-April, Second, middle-May, third, from late-August to middle-September. Peak day of airborne pollens of each species was related with cumulative temperature. The total amount of airborne pollen during one year had fluctuation in each year. Year by year, the amount of airborne pollens from tree was increaed, but airborne pollens of grasses was decreased. Among tree airborne pollens, the deposition rate of pinus pollen was steady, bur Quercus was relatively increased.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.247-251
• /
• 2002

In this paper the maximum current carrying capability of ACAs flip chip joint is investigated based on two failure mechanisms: (1) degradation of the interface between gold stud bumps and aluminum pads; and (2) ACA swelling between chips and substrates under high current stress. For the determination of the maximum allowable current, bias stressing was applied to ACAs flip chip joint. The current level at which current carrying capability is saturated is defined as the maximum allowable current. The degradation mechanism under high current stress was studied by in-situ monitoring of gold stud bump-aluminum pad ACA contact resistance and also ACA junction temperature at various current level. The cumulative failure distributions were used to predict the lifetime of ACAs flip chip joint under high current stressing. These experimental results can be used to better understand and to improve the current carrying capability of ACA flip chip joint.

• Korean journal of applied entomology
• /
• v.43 no.2
• /
• pp.111-116
• /
• 2004

The development of Aphis gossypii was studied at various constant temperatures ranging from 15 to 35$^{\circ}C$, with 60-70％ RH, and photoperiod of 16：8 (L：D h). Mortality of A. gossypii was high in the early developmental stages, and at high temperatures. The total immature developmental period ranged from 4.6 to 11.5 days. The lower developmental threshold temperature and effective cumulated temperature for all immature stages were 5.0$^{\circ}C$ and 106.8 degree-day, respective. The nonlinear shape of temperature-dependent development was well described by the modified Sharpe and DeMichele model. The normalized cumulative frequency distributions of developmental period for each life stage were fitted to the three-parameter Weibull function.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.4
• /
• pp.399-406
• /
• 2013

Our aim was to determine the effects of a citrus by-product (CBP) and CBP fermented by Lactobacillus plantarum (LP-CBP), provided as dietary supplements, on the growth performance, feed utilization, innate immunity and temperature tolerance of red seabream. A diet without inclusion of CBP or LP-CBP was used as a control and four other experimental diets were formulated to replace wheat flour by 4% and 8% of either CBP or LP-CBP (designated as Con, LP-CBP4%, LP-CBP8%, CBP4% and CBP8%, respectively). Experimental diets were fed to triplicate groups of 25 fish (initial body weight, 55.0 g) for 9 weeks. Growth performance and feed utilization were not significantly different among all the groups. Bone collagen content was significantly increased by supplementation with CBP and LP-CBP. Vitamin C concentration tended to be higher in livers of fish fed the supplements than in the control group. Myeloperoxidase, lysozyme and superoxide dismutase activities were higher in fish fed CBP or LP-CBP than in fish fed the control diet. When fish were exposed to low water temperature, cumulative mortalities of those fed CBP or LP-CBP supplemented diets were lower (29%, 33%, 34% and 33% mortalities for LP-CBP4%, LP-CBP8%, CBP4% and CBP8%, respectively) than in the control group (58%). Therefore, inclusion of either CBP or LP-CBP at up to 8% in red seabream diet brings benefits through enhanced innate immunity and better tolerance of low water temperature.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.3
• /
• pp.177-182
• /
• 2004

A chill unit has been used to estimate chilling requirement for dormancy release and risk of freezing damage. A system that calculates chill units was developed to obtain site-specific estimates of dormancy release date for grapes and evaluated in Baekgu myun near Kimje City, Chunbuk, Korea from September 2002 to March 2003. The system utilized daily minimum and maximum temperature maps generated from spatial interpolation with temperature correction for topography. Hourly temperature was temporally interpolated from the daily data using a sine-exponential equation (Patron and Logan, 1981). Hourly chill units were determined from sigmoid, reverse sigmoid, and negatively increasing sigmoid functions based on temperature ranges and summed for 24 h. Cumulative daily chill units obtained from measurements did not increase until 20 October 2002, which was used as a start date for accumulation to estimate the dormancy release date. As a result, a map of dormancy release date in the study area was generated, assuming 800 chill units as a threshold for the chilling requirement. The chill unit accumulation system, implemented using Microsoft Visual Basic and C++ (Microsoft, Redmond, WA, USA), runs in the Windows environment with ArcView (ESRl Inc., Redlands, CA, USA).

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.1-8
• /
• 1999

Three-point bending fatigue properties of austenitic 304 stainless steel sheets were investigated at room temperature and LNG temperature($-162^{\circ}C$) in the strain range from 0.43 to $1.7\%$. The fatigue properties at $-162^{\circ}C$ were superior to those at room temperature due to the higher volume fractions of deformation-induced martensite. The cyclic hardening behavior owing to the deformation- induced martensite transformation was detected in both specimens. In room temperature testing, the mean load amplitude increased steadily with cycles, meaning that cumulative plastic incubation strain was required for martensite transformation. On the contrary, in $-162^{\circ}C$ tested specimen, the mean load amplitude increased rapidly within a few cycles due to the rapid transformation of martensite, and slightly decreased after the maximum is reached probably due to dynamic recovery.

• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.206-213
• /
• 2022

Ecological characteristics of a brown alga, Scytosiphon lomentaria, were investigated from January 2021 to December 2021 in its natural habitat off Sodol, Jumunjin, eastern coast of Korea. The S. lomentaria population at the site formed widespread patches on mid shore. During the investigation, environmental conditions including seawater temperature, salinity, and dissolved oxygen were monitored at the site. Growth and maturation of the S. lomentaria population were identified through qualitative and quantitative investigations. An estimation of the effective cumulative temperature for maturation of the alga was obtained based on growth data and a biological zero temperature of 8℃. Sporangia were observed from February to May when seawater temperatures ranged from 7.7℃ to 16.4℃. A maturation peak was detected in April when seawater temperature was 12.1℃. After zoospore release, the alga became bleached and only the crust remained after June. Developmental initiation of the thallus occurred at temperatures above 8℃. Its maturation required approximately 162 degree-days.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.103-115
• /
• 2011

Concrete slab curls and warps due to the uneven distribution of temperature and moisture and as the result, internal stress develops within the slab. Therefore, environmental loads must be considered in addition to the traffic loads to predict the lifespan of the concrete pavement more accurately. The strength of the concrete slab is gradually decreases to a certain level at which fatigue cracking is generated by the repetitive traffic and environmental loadings. In this study, a new fatigue regression model was developed based on the results from previously performed studies. To verify the model, another laboratory flexural fatigue test program which was not used in the model development, was conducted and compared with the predictions of other existing models. Each fatigue model was applied to analysis logic of cumulative fatigue damage of concrete pavement developed in the study. The sensitivity of cumulative fatigue damage calculated by each model was analyzed for the design factors such as slab thickness, joint spacing, complex modulus of subgrade reaction and the load transfer at joints. As the result, the model developed in this study could reflect environmental loading more reasonably by improving other existing models which consider R, minimum/maximum stress ratio.