A novel peak-to-average power ratio (PAPR) reduction method is proposed for single-carrier frequency-division multiple access (SC-FDMA) signals. The proposed method deliberately distorts the amplitude values of a few of the complex modulated symbols that cause peaks beyond a predetermined threshold in the samples of the output signal. The method then marks the location indices of the distorted symbols by using a pilot block at the transmitter without transmitting side information. At the receiver, the method is then able to recover the distorted amplitude values through the marked location indices. Computer simulation results show that when compared to conventional SC-FDMA signals, the proposed scheme can effectively reduce the PAPR of SC-FDMA signals with asymptotically consistent bit error rate (BER) performance.
The purpose of this study is to present the method to select optimal size for the industrial products which are closely related to human's body size. For this purpose, human factors such as body characteristics, body features, and preference in product selection which needs to be considered in setting standards were analyzed. This analysis is to select optimal size to minimize losses caused by the difference of size between demand by the customers and supply from the manufacturers. Using loss function, repetitive calculation process algorithm by using bisearch method was applied in selecting the sizes of demand and supply which minimize the total expected losses. For cumulative normal distribution probability, IMSL routine DNORDF was used. In case study, comparison has been made between the result which was calculated using presented algorithm and the results calculated by the process currently used by KS and ISO by measuring aged women's body size in human factors side and sorting them through the factor analysis and cluster analysis for feature factor extraction. Thus, they can be used as a basis for establishing industrial product standards.
ROC와 CAP 곡선을 이용하여 다양한 정확도 측도를 바탕으로 최적분류점을 추정하는 많은 연구가 있다. 본 연구에서는 ROC와 CAP 곡선의 특정한 부분 면적을 나타내는 대안적인 통계량을 제안한다. 새롭게 정의된 부분 면적을 나타내는 통계량의 미분방정식을 이용하여 ROC와 CAP 함수와의 관계를 살펴보고, 다음으로는 ROC와 CAP 곡선에 대한 다양한 정확도 측도들의 조건에서의 최적분류점과의 관계를 유도한다. 혼합분포를 구성하는 두 종류의 분포함수를 다양한 정규분포로 가정하여 최적분류점을 설정하고, 다양한 정확도 측도들의 조건에서의 최적분류점에 대응하는 제1종과 제2종 오류의 크기를 탐색하고 토론한다.
Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul and suspended particulate was collected by Andersen air sampler during this period. The samples were analyzed for 16 components $(SO_n^{2-}, NO_3^-, Cl^-, PO_4^{3-}, NH_4^+, F^-, Al, Fe, K, Cu, Mn, Na, Pb, Mg, Ca, Cd)$. The conclusions are as follwes: 1. Total suspended particulate concentation during the period of sandy dust phenomena was 489 $\mug/m^3$ (ordinary times: 140-125 $mug/m^3$) 2. The water - soluble ion component concentration of suspended particulate during the period of sandy dust phenomena was few and the metal concentration of that was more than that of ordinary times. 3. The cumulative frequency distribution of suspended particulates in logarithmic diagram did not show similar to normal log distribution during the period of sandy dust phenomena. 4. $SO_4^{2-}, NO_3^-, Cl^-, and PO_4^{3-}$ was onsided to coarse particle, and $NH_4^+$ and F to fine particle in the size distribution of water - soluble ion components during the period of sandy dust phenomena. 5. Metal concentration was high and Al, Fe, Cu, Mn, Na, Mg, and Ca was onsided to coarse particle, and K, Pb, and Cd to fine particle in the size distribution of metal components. 6. During the period of sandy dust phenomena the quantity of respirable particle (< 1 $\mum$) was about 3 times and that of metal components were about 2 - 11 times than that of ordinary times. 7. The concentrations of $NO_3^-, Cl^-, NH_4^+$ at ordinary times were 1.1 - 4 time than that of the period of sandy dust phenomena.
This paper presents an effective approach for wind turbine (WT) condition assessment based on the data collected from wind farm supervisory control and data acquisition (SCADA) system. Three types of assessment indices are determined based on the monitoring parameters obtained from the SCADA system. Neural Networks (NNs) are used to establish prediction models for the assessment indices that are dependent on environmental conditions such as ambient temperature and wind speed. An abnormal level index (ALI) is defined to quantify the abnormal level of the proposed indices. Prediction errors of the prediction models follow a normal distribution. Thus, the ALIs can be calculated based on the probability density function of normal distribution. For other assessment indices, the ALIs are calculated by the nonparametric estimation based cumulative probability density function. A Back-Propagation NN (BPNN) algorithm is used for the overall WT condition assessment. The inputs to the BPNN are the ALIs of the proposed indices. The network structure and the number of nodes in the hidden layer are carefully chosen when the BPNN model is being trained. The condition assessment method has been used for real 1.5 MW WTs with doubly fed induction generators. Results show that the proposed assessment method could effectively predict the change of operating conditions prior to fault occurrences and provide early alarming of the developing faults of WTs.
본 논문에서는 지오텍스타일 공극 크기 분포를 이미지 분석방법을 이용하여 정량적으로 산출하였다. 연구과정은 실내시험을 통해 지오텍스타일-지오멤브레인 층으로 된 재료를 에폭시 레진으로 포화시킨 후, 양생, 절단하여 그 표면을 디지털 광학현미경으로 관찰하고 정량화함으로 이루어졌다. 여기서는 재료공학에서 주로 사용하는 공간학(stereology)의 개념을 사용하였으며, 지오텍스타일 필라멘트에 의해 둘러싸인 공극의 크기를 최대내접공극크기분포(LIOS)로 표현하였다. 지오텍스타일 내부 축적빈도 50%에 해당하는 공극직경이 압축응력이 10kPa에서 300kPa로 증가함에 따라 $45{\mu}m$가량 감소하였으며, 다시 압축응력을 10kPa로 되돌렸을 경우 초기치의 90%정도 수준으로 회복하였다. 마찰형 지오멤브레인 표면에서 연직응력 100, 300 kPa을 받으며 전단되었을 경우 평균 공극의 크기가 각가 32, 16.5% 감소하였다. 본 논문의 시험 및 분석 결과는 지오텍스타일 내부의 최대내접공극 크기분포가 표면거칠기가 다른 지오멤브레인 표면에서 압축 및 인터페이스 전단됨에 따라 어떻게 변화하는지를 보여준다.
우리나라 주요 항만의 입출항 통항패턴을 연구하기 위한 사전 연구로서, 부산항에 입 출항하는 위험화물운반선의 통항량을 항만운영정보시스템(Port Management Information Systim, Port-MIS) 자료를 이용하여 사전 조사하고, 통항량이 가장 높은 각 계절별 연속 3일을 선별하였다. 해양안전종합정보시스템(General Information Center on Maritime Safety & Security, GICOMS) 자료를 이용하여 선별된 12일간 위험화물운반선의 부산항 주요 통항로의 통항 패턴을 분석하였다. 또한 주요 입출항 지점인 북항 오륙도 방파제와 감천항 동방파제의 위험 화물운반선의 통항 이격거리를 분석하였다. 항로 단면에서 선박의 궤적이 정규분포를 이룬다는 가정을 근거로 해상교통안전진단 등에서 정규분포의 누적 확률분포 함수를 이용하여 충돌확률을 추정하여 사용하고 있지만, 오륙도 방파제 입출항 및 감천항 동방파제 입항에서의 선박의 항해 궤적은 KS-test 및 SW-test를 이용한 정규성 검정결과 정규분포를 따르지 않는 것으로 평가되었다. 특히 북항에서는 선박의 우측통항 경향이 두드러지게 나타났다. 일반적인 통항이론의 적용보다는 항만의 특성에 맞는 통항모델을 개발하여, 해상교통안전진단 등에서 적용하는 것이 바람직하여 이에 대한 후속연구가 필요할 것으로 판단된다.
해수 중에서 자연상태의 황토입자의 침강특성에 관한 연구의 요약은 다음과 같다. 1. 2,000mg/$\ell$ 황토용액에 대한 PSD 곡선은 0 min. 침강시간에서 정규분포곡선을 나타내었고 평균입도는 31.6$\mu$m, 변동계수는 $75,6\%$로써 매우 광범위한 입도의 분포상태를 보여 주었다. 그러나 침강시간이 경과함에 따라 비정규분포곡선의 양상을 나타내었다. 한편 무게누적분포곡선에서 거의 $100\%$의 입자가 20$\mu$m 보다 큰 입자로 구성되어 있었다. 2. 해수 중에서 황토입자에 대한 $V_s/(D_{bm})^{1/2}$ 비의 값은 입자의 크기가 증가함에 따라 기하급수적으로 증가하였으며, 1 $\mu$m 입자를 중심으로 이 이상은 $V_s$ 가 $(D_{bm})^{1/2}$보다 크고 이 미만은$(D_{bm})^{1/2}$이 $V_s$ 보다 큰 값을 나타내었다. 20$\mu$m 크기의 입자에 대하여 $V_s/(D_{bm})^{1/2}$ 비의 값은 2,355이었다. 3. 해수 중에서 황토입자는 매우 엷은 EDL 두께 (0.4$\mu$m)를 나타냄으로써 EDL repulsive force가 거의 존재하지 않았으며, 상호 접근하는 황토입자는 모든 간격에서 LVDW attractive force가 EDL repulsive force보다 큰 값을 나타내어 항상 용이하게 floc을 형성할 수밖에 없는 조건에 있었다. 4. 해수 중의 황토입자의 $V_s/(D_{bm})^{1/2}$ 비의 값과 total interaction energy로부터 자연상태의 황토입자는 해수 중에서 외부의 강력한 전단력이 없이는 매우 확산되기 어려운 상태에 있으며, 조류의 수평운동이 적은 내만에서는 입자의 물리적 거동은 침강에 의하여 지배되는 것으로 나타났다. 5. 2,000mg/$\ell$ 황토용액에 대한 침강실험에서 대략 $22.5\%$의 황토는 격렬한 교반에도 불구하고 즉시 침강하였다. 황토농도가 400, 2,000, 10,000mg/$\ell$으로 증가함에 따라 침강특성은 개별입자침강(Type I settling or discrete settling)에서 응결침강(Type II settling or flocculation settling)의 상태로 바뀌었다. 이것은 실제 해양에서 황토입자들 끼리 floc을 형성할 정도로 많은 양의 황토를 적절한 분산장치 없이 살포하는 것은 지양해야 하며 동시에 동일한 농도의 황토용액도 살포방법에 따라 분산의 크기가 달라질 수 있음을 의미하는 것이다. 6. PVD 그래프로부터 자연상태의 황토는 급격하게 침강하는 입자와 장시간 부유하며 천천히 침강하는 입자로 구성되어 있었고 후자의 양이 전자의 양에 비하여 매우 적은 상태로 나타났다. 7. 황토를 이용하여 적조를 효과적으로 제거하기 위해서는 자연상태의 황토를 그대로 사용하기보다는 (1) 미세한 입자상태로 분쇄하고, (2) 적절한 살포장비와 분산장비를 사용하여 해수 중에서 황토입자가 넓게 부유 분산하여 적조생물과 충분한 충돌을 일으키도록 해야한다. 이것은 적어도 황토입자를 이용하여 적조를 응집 제거하려고 할 경우 피할 수 없는 기본적 원리가 되며 동시에 황토 사용량을 줄일 수 있는 하나의 방법이 된다. 8. 일반적으로 입자의 크기는 응집 및 흡착반응에 매우 중요한 인자가 된다. 황토입자는 크기가 작을수록 용이하게 분산시킬 수 있으며 더욱 효과적으로 Cochlodinium 적조를 제거할 수 있다. 실제로 어떤 황토입자의 크기가 적조 제거에 효과적인가는 현장실험을 통하여 침강속도, 수평분산범위, 적조제거효율 등을 조사하여 반드시 결정하여야 한다.
경사제의 평균 잔류수명을 간편하게 추정할 수 있는 방법을 제시하였다. 누적피해의 시간 이력 자료를 기반으로 하는 추계학적 확률모형과 다르게 내구수명의 분포함수를 이용하여 평균 잔류수명을 추정하는 방법이다. 설계 내구수명과 과거 하중이력에 따라 전문가들이 판단한 내구수명의 상한치와 하한치 그리고 그 발생 가능성을 활용하여 분포함수의 모수도 쉽게 추정할 수 있다. 본 연구에서 제시된 간편법을 전면이 TTP로 피복된 경사제에 적용하였다. TTP 피복재의 시간에 따른 누적피해에 대한 모형실험 자료가 있는 동일 조건에 대하여 WP(Wiener Process) 기반의 추계학적 확률모형도 MCS(Monte-Carlo Simulation) 기법과 함께 적용하였다. 각각의 해석 방법으로부터 얻어진 결과들을 MTTF(Mean Time To Failure)와 함께 비교하여, 실제 발생 가능한 시간에 따른 모든 형태의 피해경로에 대하여 경사제의 내구수명 분포함수는 대수정규분포를 따른다는 것을 알 수 있었다. 마지막으로 본 연구에서 제시된 간편법으로 추정된 경사제의 재령에 따른 평균 잔류수명을 WP 기반 추계학적 확률모형의 결과와 비교하였다. 일정한 재령까지는 누적피해의 증가 형태와 관계없이 비교적 잘 일치하였으나, MTTF 근방의 재령에서는 선형적인 증가와 대수적인 증가 형태에서 어느 정도 차이를 보이고 있다. 따라서 불확실성을 올바로 고려하기 위해서는 추계학적 확률모형을 사용하는 것이 바람직하지만, 본 연구에서 제시한 간편법은 누적피해에 대한 시간 이력 자료를 필요로 하지 않기 때문에 항만 구조물에 대하여 평균 잔류수명 기반의 예방적 유지관리를 신속하게 계획할 필요성이 있는 경우에 유용하게 활용될 수 있다.
조위편차는 최근 기후변화에 의한 영향으로 연안 안전 방재 측면에서 매우 중요한 인자로 부각되고 있다. 태풍강도 등과 더불어 변화가 예상되는 조위편차는 해안구조물의 안전 및 기능검토에 필요한 기준해수면 결정에 기여하는 중요한 인자이다. 우리나라 연안 조위편차의 확률밀도함수는 음 양의 왜도와 정규분포보다 큰 돌도를 가지는 분포로, 정규분포로 근사화하는 방법은 한계가 있기 때문에 본 연구에서는 비모수적 방법인 Kernel 함수를 이용하여 확률밀도함수를 추정 제안하였다. 본 연구에서 제안된 확률밀도함수는 조위편차자료의 분포와 매우 우수한 일치수준을 보이고 있으며, 다양한 극값 추정에도 높은 수준의 정도를 보여주고 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.