• The Journal of the Petrological Society of Korea
• /
• v.13 no.1
• /
• pp.34-45
• /
• 2004

This paper describes the textural relations of mantle xenoliths and fluid inclusions in mantle-derived rocks found in alkaline basalts from Jeju Island which contain abundant ultramafic, felsic, and cumulate xenoliths. Most of the ultramafic xenoliths are spinel-lherzolites, composed of olivine, orthopyroxene, clinopyroxene and spinel. The felsic xenoliths considered as partially molten buchites consist of quartz and plagioclase with black veinlets, which are the product of ultrahigh-temperature metamorphism of lower crustal materials. The cumulate xenoliths, clinopyroxene-rich or clinopyroxene megacrysts, are also present. Textural examination of these xenoliths reveals that the xenoliths are typically coarse grained with metamorphic characteristics, testifying to a complex history of evolution of the lower crust/upper mantle source region. The ultramafic xenoliths contain protogranular, porphyroclastic and equigranular textures with annealing features, indicating the presence of shear regime in upper mantle of the Island. The preferential associations of spinel and olivine with large orthopyroxenes suggest a previous high temperature equilibrium in the high-Al field and the original rock-type was a Al-rich orthopyroxene-bearing peridotite without garnet. Three types of fluid inclusions trapped in mantle-derived xenoliths include CO$_2$-rich fluid (Type I), multiphase silicate melt (glass ${\pm}$ devitrified crystals ${\pm}$ one or more daughter crystals ＋ one or more vapor bubbles) (Type II), and sulfide (melt) inclusions (Type III). C$_2$-rich inclusions are the most abundant volatile species in mantle xenoliths, supporting the presence of a separate CO$_2$-rich phase. These CO$_2$-rich inclusions are spatially associated with silicate and sulfide melts, suggesting immiscibility between them. Most multiphase silicate melt inclusions contain considerable amount of silicic glass. reflecting the formation of silicic melts in the lower crust/upper mantle. Combining fluid and melt inclusion data with conventional petrological and geochemical information will help to constrain the fluid regime, fluid-melt-mineral interaction processes in the mantle of the Korean Peninsula and pressure-temperature history of the host xenoliths in future studies.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.95-102
• /
• 2004

In this paper, Experience Sensitive Cumulative Neural Network (ESCNN) is introduced, which can cumulate the same or similar experiences. As the same or similar training patterns are cumulated in the network, the system recognizes more important information in the training patterns. The functions of forgetting less important information and attending more important information resided in the training patterns are surveyed and implemented by simulations. The system behaves well under the noisy circumstances due to its forgetting and/or attending properties, even in 50 percents noisy environments. This paper also describes the creation of the generalized patterns for the input training patterns.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.530-538
• /
• 2003

Recently the needs for keeping existing customers is increasing in the field of marketing. So, the customers needs to be classified by groups and the differentiated responses to the specified customer groups are demanded. In this paper, we implemented a system that classifies the customer groups using the neural network, and classified the purchasing patterns among customer groups. Empirically examining the association rules between two groups, we could find out that similar rules exist between them. So, it is important that customers should be classified into the excellent customer group and the general group for the decision making of marketing. This paper shows that the efficiency of the differentiated marketing can be maximized by raising the correctness of the expectation in the classification of customer groups.

• Korea Trade Review
• /
• v.47 no.1
• /
• pp.199-214
• /
• 2022

This study aims to quantify the value of origin among CPTPP and Korea, under the assumption that the 'cumulation' clause has large economic effects in multilateral FTAs and increase the possibility of improving FTA utilization. Analysing the relationship between value-added exports and FTA utilization rate, there is a positive correlation between the two variables, and the cumulation of multilateral production of CPTPP is expected to increase Korea's value-added exports. In the GTAP-VA model, the target of cumulation is calculated as 'Domestic Value Added', and all value-added of CPTPP are cumulated in the form of value added exports of exporting country. When Korea participates in CPTPP, it is possible to cumulate additional 6.3~9.6% value added, and the agreements with low FTA export utilization rates such as New Zealand, ASEAN would have greater economic effects of cumulation. For the successful implementation of CPTPP in Korea, it is necessary to develop a new origin verification system that enables multilateral value-added cumulation. It is time to seek cooperation with countries currently participating in CPTPP to prove the value added inherent in CPTPP-originating products.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.514-517
• /
• 2008

Ubiquitous healthcare (U-healthcare) system is one of potential applications of embedded system. Conventional U-healthcare systems are used in health monitoring or chronic disease care based on measuring and transmission of various vital signs. However, future U-healthcare system can be of benefit to more people such as stroke patients which have limited activity by providing them proper medical care as well as continuous monitoring. Recently, an electric brain stimulation treatments have been found to be a better way compared to conventional ones and many are interested in using the method toward the treatment of stroke. In this study, we proposed a remote medical treatment system using ZigBee-based wireless electric brain stimulator that can help them to get a treatment without visiting their doctors. The developed remote medical treatment system connects the doctors to the brain stimulator implanted in the patients via the internet and ZigBee communication built in the brain stimulator. Also, the system receive personal information of the connected patients and cumulate the total records of electric stimulation therapy in a database. Doctors can easily access the information for better treatment planning with the help of graphical visualization tools and management software. The developed remote medical treatment system can extend their coverage to outdoors being networked with hand-held devices through ZigBee.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.442-445
• /
• 2002

Construction delay claim occurs more often than any other claim. Delay claim impacts adversely the company's existence as well as the project's monetary problem. Because the calculation of the delay is not quantitative, owing not to have enough evidence, it is hard to solve evenly the delay claim. So, it is need to cumulate structurely the construction data or evidence during the construction. This study considers the established study about construction delay claim database and the problems and then presents the relation method between phase schedule and database. Finally, this study established the productivity claim database modeling for construction project through conceptual database modeling and logical database modeling based on information needed to make construction productivity database. So. the purpose of the study is to establish the datamodel for productivity management of construction project for calculating the delay days considering the lost productivity.

• Journal of Hydrogen and New Energy
• /
• v.29 no.6
• /
• pp.661-667
• /
• 2018

Electric vehicles are taken a long time to charge and are restricted driving where charging infrastructure was not sufficiently constructed. The vehicle developed to solve these problems is a plug-in hybrid vehicle. It is possible to drive a certain distance by using electric motor and when the battery runs out, it operate the engine. Plug-in hybrid vehicle have a complicated structure and a lot of parts comparing a general vehicle because the electric parts and the internal combustion engine are installed together. Therefore, as the aging (mileage) of the plug-in hybrid vehicle, the influence which change of fuel consumption is expected to be larger than a general vehicle, but an experimental data are lacking. In this paper, we cumulate a mileage of the plug-in hybrid vehicle about 15,000 km and measured the fuel economy when the cumulated distance reached within 160 km, 6,500 km, 15,000 km respectively, by using domestic public test method. For measuring fuel economy of the vehicle, CD mode (driving distance on a single charge) which use only motor and the CS mode which operate motor and combustion engine were measured respectively. As a result, the fuel economy slightly increased at cumulated mileage of 6,500 km compared to the 160 km and the fuel economy of 15,000 km was similar to 160 km.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.3
• /
• pp.223-236
• /
• 2009

Ultramafic xenoliths from southeastern part of Jeju Island can be grouped into two types: Type I and Type II. Type I xenoliths are magnesian and olivine-rich peridotite (mg#=89-91), which are commonly found at the outcrop. Most previous works have been focused on Type I xenoliths. Type II xenoliths, consisting of olivine, orthopyroxene and clinopyroxene with higher Fe and Ti components (mg#=77-83) and lower Mg, Ni, Cr, are reported in this study. They are less common with a more extensive compositional range. The studied Type II xenoliths are wehrlite, olivine-clinopyroxenite, olivine websterite, and websterite. They sometimes show ophitic textures in outcrops indicating cumulate natures. The textural characteristics, such as kink banding and more straight grain boundaries with triple junctions, are interpreted as the result of recrystallization and annealing. Large pyroxene grains have exsolution textures and show almost the same major compositions as small exsolution-free pyroxenes. Although the exsolution texture indicates a previous high-temperature history, all mineral phases are completely reequilibrated to some lower temperature. Orthopyroxenes replacing clinopyroxene margin or olivine indicate an orthopyroxene enrichment event. Mineral phases of Type II are compared with Type I xenoliths, gabbroic xenoliths, and the host basalts. Those from Type II xenoliths show a distinct discontinuity with those from Type I mantle xenoliths, whereas they show a continuous or overlapping relation with those from gabbroic xenoliths and the host basalts. Our petrographic and geochemical results suggest that the studied type II xenoliths appear to be cumulates derived from the host magma-related system, being formed by early fractional crystallization, although these xenoliths may not be directly linked to the host basalt.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.103-114
• /
• 2007

Gabbroic xenoliths in poikilitic and equigrnular textures and plagioclase megacrysts, up to 15 cm in size, are trapped in alkaline basalts from Sinsanri and Sangeumburi, Jeju island. Gabbroic xenoliths are gabbro norite in composition. Plagioclase is the most dominantly present $(42{\sim}94vol%)$, while olivine crystals are absent. Pokilitic xenoliths, interpreted as cumulates, include euhedral opx+cpx in oikocryst plagioclase. Equigranular xenoliths include subhedral to anhedral opx+cpx+pl. Based on the textural and geochemical natures, occurrence mode at the outcrops, poikiltic and equigranular xenoliths and plagioclase megacrysts were from rigid zone, mushy zone and crystal-suspended zone of the magma chamber, respectively. The gabbroic xenoliths in alkaline basalts of the Juju island represent crystallization products of relatively evolved basaltic magma at the Jeju magma reservoir beneath the Jeju Island. They are gabbro fragments that represent crystallization-isolation-capture processes associated with magma batches temporarily occupying reservoirs.

• Journal of the Daesoon Academy of Sciences
• /
• v.25_2
• /
• pp.1-43
• /
• 2015

Daesoonjinrihoe perceives that human suffering is caused not only by mental factors but also by the cosmic principle of Mutual Overcoming more fundamentally. The relationship influenced among all things in the universe is Mutual Beneficence and Mutual Overcoming. If these relations are properly cooperated in harmony, all things will reveal their energetic existence in a balanced state, however, if one side, particularly, Mutual Overcoming becomes excessive, indeed, it will cause trouble. That is, the sentient beings that are inclined to excessive Mutual Overcoming rather than indispensable Mutual Overcoming make grievances among themselves and cumulate them. In the end, heaven and earth lose its constant Way[常道], leading the sentient beings to all kinds of agonies. However, it may be a problem if every agony is depicted with Mutual Overcoming, that is, one single fixed frame, because Mutual Overcoming has to be interpreted diversely according to the circumstances. Thus, it is not possible to explain precisely about the agony if not understanding its spectrum. This study analyzed the ways how Daesoonjinrihoe explains the aspects of reasons and solutions to a variety of agonies. In the Supreme Scripture of Daesoonjinrihoe, the reasons for agony vary: first, it is caused by Mutual Overcoming of the cosmos itself, which is irrelevant to human beings. Secondly, man can be victimized because of Mutual Overcoming caused by man. Thirdly, there is a case of a victim who is damaged due to Mutual Overcoming caused by the other. Fourthly, man can be victimized because of Mutual Overcoming caused by someone else's unintended deeds. Fifthly, there is a case of man having agony in return when he, as a perpetrator, hurt others or resolve his inappropriate desires. Sixthly, man's deed unintendedly became a sin and have agony in return. Seventhly, man can be a self-perpetrator, conceiving vain desire, obsession and grievance. Eightly, there is a case of man having agony during enforcement of the law or practice of justice. Ninthly, man needs to endure agony during self-cultivation, enacting Reordering of the Universe(天地公事), ritual practice, promotion of fortune, and test. However, it is important to make sure that the reason for agony can interact with not only one but also diverse models in real situation. These nine models are included in the category of Mutual Overcoming; but, these cannot be classified in a single term, Mutual Overcoming because much information will be hidden, only to make it difficult to explain about agony more precisely. There are some characteristic observed in the concept of agony in Daesoonjinrihoe as follows: first, reasons for agony are caused by Mutual Overcoming although Mutual Overcoming can be interpreted differently according to the circumstances. Secondly, Daesoonjinrihoe makes a positive valuation for some agony. Thirdly, the solution to overcome a agony is brought to a conclusion, that is cultivation practice of Daesoonjinrihoe. Fourthly, the experience of agony and solution in Daesoonjinrihoe sometimes lie in the unit of family beyond individual. Fifthly, in the painful situation resulted from vain desire and obsession, Daesoonjinrihoe suggests a solution called Mutual Beneficence. That is, it emphasizes not only self-control but also active practice of considering others.