• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.183-185
• /
• 2022

High-income mushroom crops require complex farming. Therefore, we conducted a test to identify the optimum temperature for the production of antler-shaped Ganoderma lucidum using the King Oyster mushroom cultivation facility. T-N showed 0.28% of oak sawdust and 2.2% of nutritional source. The pH of oak sawdust was 6.0, indicating weak acidity, and that of rice steel was 6.6, indicating neutrality in nutrition source. Study on the quality characteristics of mushrooms showed that the number of days at 25℃ were 5~6 and those at 30℃ were 3~5; the representative length at 25℃ was 57.5 mm and that at 30℃ was 92.2 mm; the biological weight at 25 ℃ was 43 g, which was greater than that at 30℃.

• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1109-1123
• /
• 2020

In this study, the amount of harmful fungi and bacteria contained in the drainage and culture medium from the paprika hydroponic facility is identified. In addition, by proposing the necessity of effective purification of discharged drainage, this study attempted to confirm the possibility of drainage reuse. Finally, this study provides basic data on the basis for calculating the need for purification facilities in the future, as well as improvements in horticulture facility for sustainable agriculture. As a result of the analysis, a total of 12 types of fungi were detected in paprika medium and 10 types of fungi were detected in the drainage, and their densities were 130 and 68, respectively. Among the fungi detected in the media and drainage of the paprika hydroponic facility, the fungi with the highest detection frequency are Fusarium, Phytophthora, and Pythium. In the case of bacteria, a total of 2 types of bacteria were detected in the paprika facilities, and the density was 28 and 23, respectively. Therefore, in order to reuse the drainage and settle the circulating hydroponic cultivation system, a water treatment process capable of appropriate treatment is required.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.41-53
• /
• 2019

Recently, the damage caused by climate change has been distinguished in the world. The Korean Peninsula is also suffering from drought, so it is necessary to study the vulnerability assessment to identify and predict the state of the irrigation facility, which is a irrigation facility. As the damage caused by drought is occurring in the Korean peninsula, it is necessary to study the vulnerability assessment to know the condition of the irrigation facility, and to predict it. The target areas were Yeongdong-gun, Cheonan-si, Mungyeong-si, Geochang-gun, Muju-gun, and Yeonggwang-gun. The survey items were selected as positive impacts survey items, including precipitation, groundwater level, and pumping capacity per groundwater well. The negative impacts were selected as the cultivation acreage, Number of days without rain, and the ratio of private underground wells. The survey method was investigated by various methods such as "weather data portal", "groundwater level status information", "agricultural drought management system", "groundwater survey yearbook". The results of vulnerability assessment were expressed by the score by conducting survey and standardization. As a result, Yeonggwang-gun showed normal vulnerability, and other areas showed "vulnerable" or "very vulnerable".

• Mycobiology
• /
• v.31 no.2
• /
• pp.105-112
• /
• 2003

Sclerotia of Grifola umbellata were cultivated by two methods such as burying and root inoculation methods. The sclerotia of G. umbellata produced by the burying method were $6.0{\sim}6.8{\times}3.4{\sim}4.6{\times}1.8{\sim}1.9cm$(Width$\times$Length$\times$Thickness) in size and $17.3{\sim}19.6g$ in weight, respectively. Their increase rate was $1.10{\times}1.12$ times. On the other hand, the sclerotia cultivated by the root inoculation method were $18.3{\sim}31.5{\times}12.5{\sim}26.4{\times}3.1{\sim}3.7cm(W{\times}L{\times}T)$ in size and $219.1{\sim}576.6g$ in weight, respectively. Their growth increment was $11.18{\sim}39.77$ times. The rhizomorphs of Armillaria mellea were developed with a high density under fallen leaves layer covering cultivation site, and distributed mainly between soil surface and soil depth of about 10 cm as well as colonized prominently on the inoculated wood logs. Fungal interaction between G. umbellata and A. mellea were observed mainly in the stage of white sclerotium of G. umbellata. The sclerotia of G. umbellata which were developed newly and harvested in the root inoculation method were twined with root hairs of host tree and rhizomorphs of A. mellea. The sclerotia of G. umbellata decomposing root hairs of host tree were confirmed through SEM examination. Physiochemical characteristics of soil in all cultivation sites had no significant differences. Soil pH were in the range of pH $3.98{\sim}4.40$. Organic matters were the range of $17.97{\sim}23.86%$ and moisture contents of soil were $12.00{\sim}18.20%$. Soil temperatures showed $12.9{\sim}13.8^{\circ}C$ in November and $22.0{\sim}23.9^{\circ}C$ in August, respectively. In conclusion, the root inoculation method seems to be a practical method for cultivating sclerotia of G. umbellata due to its many advantages such as simplicity of inoculation process, shortening of cultivation periods and facility of harvest.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.200-206
• /
• 2003

Pleurotus eryngii(King oyster) is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. To safely produce high-quality Eryngii all the year round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. At the commercial mushroom cultivation house(A,B), this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. this experiment was conducted for about two-month from Nov. 11, 2002 to Dec. 30, 2002 in Eryngii. cultivation house-A, B. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Maximum air temperature difference between the upper and lower growth stage during a heating time zone was about 2~3$^{\circ}C$. The max. and min. relative humidity were ranged approximately 60~100%, and average relative humidity was ranged approximately 80~100%. And $CO_2$concentration increased until maximum 1,600~1,800 ppm with the passing growing period. The illuminance in cultivation house was widely distributed from 20lx to 160 lx in accordance with position, and it was maintained lower than the recommended illuminance range 100~200 lx. The average yield per bottle was about 67~85g. But the optimal productivity will be evaluated by considering the quality and quantity of mushroom production, energy requirements, facility construction and management cost, etc.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.77-82
• /
• 2012

Sterilization of oak sawdust at $65^{\circ}C$ for Lentinula edodes bed cultivation can be efficient in sterilization facility cost, but its effect on the mushroom production is uncertain due to high contamination probability. The effective conditions for L. edodes hyphal growth in the low temperature sterilized oak sawdust were investigated with combinations of three sterilization temperatures ($65^{\circ}C$, $100^{\circ}C$ and $121^{\circ}C$) and four cultivation temperatures ($15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$, and $30^{\circ}C$). L. edodes inoculation density effect was also tested with 1 cm, 2 cm, and 4 cm distance in the sawdust (4%, 11% and 25% inoculation rate by surface area). L. edodes hyphal growth in the sawdust sterilized at $65^{\circ}C$ was as much as at those $100^{\circ}C$ and $121^{\circ}C$ when the fungus cultured below $25^{\circ}C$, but it was greatly reduced when cultured at $30^{\circ}C$. And the sawdust medium with 1cm distance inoculation density was fully occupied with L. edodes hyphae, but those with 2~4cm distance inoculation were contaminated by 4~33%. Therefore, we conclude that low temperature sterilized oak sawdust needs to be cultured under $25^{\circ}C$ after sufficient inoculation by 25% for successful bed cultivation of L. edodes.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.4
• /
• pp.57-64
• /
• 2022

A plant factory is a facility that creates an artificial environment in a controlled space and produces plants systematically through automated facilities. However, automation in the cultivation process is insufficient compared to the internal environment control technology in plant factories. This causes the problem of an increase in operating costs due to the input of a large number of workers. Therefore, this study aims to evaluate economic feasibility by comparing before and after introducing automation in the cultivation process of plant factories. The target plant factory to be analyzed was selected, and the break-even point analysis method was used by comparing the cost required compared to the operating period. As a result, the break-even point was analyzed to be 3.4 years when automation was introduced into six processes for plant cultivation. Therefore, it can be judged that the introduction of automation is excellent in terms of economic feasibility when the target plant factory has been operated for more than 3.4 years. This study is expected to be used as basic data to analyze the economic feasibility of introducing automation in domestic and foreign plant factories.

• The Journal of Fisheries Business Administration
• /
• v.51 no.2
• /
• pp.15-24
• /
• 2020

As a first step in obtaining the minimum level of data needed to develop smart cultivation technology for Korean seaweed gim (Pyropia yezoensis), farming tests have been carried out using onshore aquaculture facilities. The aquaculture facility was built on paddy farmland on the west coast of Chungnam and received seawater from nearby sea. In this paper, we report the overall process and results of the aquaculture trials attempted in Korea's first onshore gim aquaculture facilities. In addition, the industrial possibility of gim production using the onshore aquaculture system will be discussed through the analysis of all expenses incurred in the test form.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.143-146
• /
• 2005

생활환경이 새로운 패러다임으로 변해가고 있다. 유비쿼터스 환경을 앞당기기 위하여 산업체 전반에 걸쳐 변화를 거듭하고 연구가 지속되고 있다. 유비궈터스 환경은 농업 분야에도 적용되어 농산물의 재배와 수확에 이르기까지 전반적인 형태를 변화 시키고 있다. 재배 시설을 원격지에서 제어함으로써 적절한 재배환경을 지원할 수 있도록 하여 환경변화 관리를 효율적으로 할 수 있으며, 사용자의 성향에 맞는 재배 환경 여건을 지능적으로 판단하고 제어 할 수 있는 시스템이 요구된다. 본 논문에서는 다양한 환경 즉, 온도, 습도, $CO_{2}$, 조도 등의 변화를 센서네트워크를 통하여 감지하고, 퍼지시스템을 통하여 환경변화를 추론하여 환기시설을 적절하게 제어할 수 있는 시스템과 알고리즘을 제안한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.47-51
• /
• 2004

Facility layout for enterprise's competitive power strengthening and construction of offensive manufacture line and direction presentation for design of production management system that is new by operation improvement according to S company. In enterprise in JIT(Just in Time) system of leading persons affecting in productions among a lot of habitat factor analyze. It is that through equipment Layout among those factors enterprise my problem improve and serves enterprise's absolute ability cultivation. Even if it is JIT production main point that affect to apply the modular production to productive system among at equipment Layout, lot size, bottleneck session etc. worker's multi-function anger, change of demand factor and productive capacity add. 'S' Through enterprise's example, I wish to establish Korean medium and small enterprises' manufacturing industry style equipment Layout model by taken place effect interpretation.