• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2014

Crown fire, the main propagation type of large forest fire, has caused extreme damage with the fast spread rate and the high flame intensity. In this paper, we developed the probability equation to predict the crown fires using the spatial features of topography, fuel and weather in damaged area by crown fire. Eighteen variables were collected and then classified by burn severity utilizing geographic information system and remote sensing. Crown fire ratio and logistic regression model were used to select related variables and to estimate the weights for the classes of each variables. As a results, elevation, forest type, elevation relief ratio, folded aspect, plan curvature and solar insolation were related to the crown fire propagation. The crown fire propagation probability equation may can be applied to the priority setting of fuel treatment and suppression resources allocation for forest fire.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.118-129
• /
• 2011

In this study, species resistant to forest fire were extracted from high trees through an investigation of combustion mechanism. Here, the average flameless ignition temperatures of living leaves, branches and barks of oak were respectively, $365^{\circ}C$, $440^{\circ}C$ and $435^{\circ}C$, and the average flameless ignition temperatures of living leaves, branches, barks and cones of pine tree were respectively, $320^{\circ}C$, $405^{\circ}C$, $435^{\circ}C$ and $363^{\circ}C$. It shows that generally, pine tree has a lower flameless ignition temperature than oak and thus, has a relatively high risk of flameless ignition. When comparing risk of fire depending on ignition characteristics, Quercus serrata had a low risk of stem fire, and Quercus acutissima and Quercus serrata had a low risk of crown fire, as well. When analysing risk of fire depending on a duration of flame, also, Quercus dentata had a low risk of stem fire, and Quercus variabilis Blume had a low risk of crown fire too. Lastly, when comparing risk of fire, according to heat release rates, Quercus acutissima had a low risk of stem fire, and Quercus acutissima and Quercus dentata had a low risk of crown fire, as well. In conclusion, it was observed that as fire-resistant species, Quercus serrata and Quercus dentata have a low risk of ignition, Quercus variabilis Blume has a short duration of flame after discharging ignition when a forest fire occurs, and Quercus acutissima, Pinus Rigida and Antipathes japonica Brook have low heat release rates.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.528-536
• /
• 2012

This study has compared the different types of forest fires(unburned, crown fire, ground fire) and the degree of vegetation recovery at Samcheuk-si, Gangwon-do by assessing the biomass and net primary production from July 2007 through July 2010. The research showed that the average biomass of unburned site(Un), crown fire site(C-1), crown fire site(C-3), ground fire site(G-2) were $181.20{\pm}5.39$, $62.04{\pm}4.38$, $131.09{\pm}14.38$, $63.39{\pm}2.72ton{\cdot}ha^{-1}$, respectively. And the research showed that the average net primary production of unburned site(Un), crown fire site(C-1), crown fire site(C-3), ground fire site(G-2) were $4.17{\pm}0.56$, $3.27{\pm}1.56$, $11.51{\pm}0.53$, $2.10{\pm}0.31ton{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. Quercus mongolica $DH_{10}$(Diameter at the 10cm tree height) growth rate at each plot was compared to the crown fire site(C-1) in the annual average $1.21{\pm}0.55mm{\cdot}yr^{-1}$ at the speed of the fastest growth follows; showed crown fire site(C-3), ground fire site(G-2), unburned site(Un) appeared in the order. And that showed the growth rate of height was highest in the $15.43{\pm}4.57cm{\cdot}yr^{-1}$ at crown fire site(C-3), then the crown fire site(C-1), and ground fire site(G-2), and lowest in the unburned site(Un).

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.67-73
• /
• 2012

This study has compared the different types of forest fire sites and the unburned site at Samcheuk-si Gangwon-do by assessing the amount of litter production, nutrient concentration returned to forest floor from July 2007 through October 2010. The research showed that the average amounts of litterfall produced in the unburned site, the crown fire site(C-1), the crown fire site(C-3) and the ground fire site(G-2) were $7.74{\pm}2.56$, $1.17{\pm}0.67$, $2.97{\pm}0.44$ and $2.92{\pm}0.42ton{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. In the unburned site, the average amounts of total nitogen(T-N), total phosphorus(T-P), potassium(K), calcium(Ca) and magnesium(Mg) returned to the forest floor were $22.20{\pm}12.43$, $1.16{\pm}0.46$, $2.68{\pm}1.44$, $16.22{\pm}4.69$ and $1.36{\pm}0.32 kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively whereas those in the crown fire site(C-1) were $3.73{\pm}2.31$, $0.10{\pm}0.09$, $0.27{\pm}0.20$, $2.75{\pm}2.58$ and $0.24{\pm}0.27 kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. This study showed that the nutrient content returned to forest floor was higher in the following order: unburned site(Un) > crown fire site(C-3) > ground fire site(G-2) > crown fire site(C-1).

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.286-290
• /
• 2012

Globally, the forest fires are a significant contributor of carbon dioxide and other greenhouse gases in the atmosphere. In this study, fuel load consumed by forest fire and emission of green house gases were analysed in the surface layer. For this, remaining fuel was collected and weighed with the species (Japanese red pine, deciduous) and the forest fire types (surface fire, crown fire) in the 51 forest fires. 8,361 kg/ha fuel load was consumed in deciduous forest damaged by surface fire, and 8,055 kg/ha, 12,333 kg/ha in Japanese red pine burned by surface fire and crown fire. The combustion ratios were 78, 59, and 90%, respectively. 15,856 kg/ha the green house gases such as $CO_2$, $CH_4$, $CH_4$ in deciduous forest burned by surface fire was emitted and 14,834 kg/ha, 22,709 kg/ha in Japanese red pine burned by surface fire and crown fire.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.71-79
• /
• 2008

To find out the effect of the vegetation recovery and the problems of forest land, the researches of the mortality in pine stand and vegetation recovery have been carried out from the burned site. In area which is damaged by fire scar on crown and stem, rate of dead is higher. Where stand growing stocks were totally damaged by crown forest fire, most of vegetation was recovered by sprouts and planted seeds. Vegetation recovery power were depending on the condition of soil depth condition. For the artificial recovery, the damage happened by insects in the planted birches plantation. Rate of growth was somewhat different between Pinus densiflora and Pinus thunbergii in the plantation, because of individual growth rate.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.39-43
• /
• 2009

we studied and analyzed a tree mortality of 7 species(Pinus koraiensis etc) in surface forest fire area. In this results, the order of tree mortality was Cryptomeria japonica>Pinus koraiensis>Pinus densiflora>Pinus thunbergii>Larix leptolepis>Pinus rigida>Quercus. More damaged crown was higher tree mortality and more d.b.h was less tree mortality. Especially, oak trees in which a damage rate of crown was less 30% almost survived.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.402-407
• /
• 2011

The objectives of this study were to analyze the crown vertical structure, crown bulk density, and to develop regression models for predicting crown fuel load using the data from 10 destructively sampled Pinus densiflora trees in Bonghwa, Gyeongbuk. The fuel loads were observed higher in the middle portion of the vertical distribution of crown followed by the lower portion and upper portion of Pinus densiflora, respectively. Approximately 25% crown fuel load was found in the needle while 33% was observed in the branches with <1 cm diameter with a total of 58% available fuel loads. The average crown bulk density was $0.45kg/m^3$, and $0.27kg/m^3$ of this was available in the needles and branches with <1 cm diameters. The resulting models in linear equations were able to account for 84% and 88% of the observed variation, while the allometric equations with diameter at breast height as the single predictor showed better results to account for 90% and 95% of the observed variation in the available crown fuel loads and total crown fuel loads, respectively. The suggested equations in this study could provide quantitative fuel load attributes for crown fire behavior models and fire management of red pine stands in Bonghwa areas.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.9-14
• /
• 2005

Competitive solvent extraction of alkaline earth metal cations from water into organic solvent containing the carboxylic acid crown ether and analogous crown ether phosphonic acid monoethyl esters were investigated. sym-(n-Decyldibenzo)-16-crown-5xyacetic acid $\underline{1}$ and monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{3}$ are structurally identical except for the ionizable groups. Both of them provide similar extraction behavior in terms of efficiency and selectivity, but monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{3}$ showed higher alkaline earth metals loadings at acidic or neutral media. Monoethylsym-(n-octyldibenzo)-16-rown-5-oxymethylphosphonic acid $\underline{2}$ showed better selectivity and alkaline earth metals loading than did the analogous sym-(n-octyldibenzo)-16-crown-5-oxymethyldiphosphonic acid $\underline{6}$.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.50-55
• /
• 2005

A comparison of alkali metal cation and alkaline earth cation solvent extraction was made for three additional monoionizable crown ethers and one diionizable crown ether. sym-(n-Octyldibenzo)-16-crown-5-oxyacetic acid $\underline{1}$ exhibited high efficiency and selecvity in solvent extraction of alkali metal cations with respect to that observed with alkaline earth cations. Sizes of $Na^+$ and $Ca^{2+}$ appropriately match with the cavity size of monoethyl sym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxymethylphosphonic acid $\underline{3}$. As the result, $Na^+$ and $Ca^{2+}$ are the best extracted. sym-(n-Octyldibenzo)-16-crown-5-oxymethyldiphosphonic acid $\underline{4}$was found to be somewhat selective for $Na^+$ over $Li^+$ and other alkaline earth metal cations. In the complexation of alklaine earth cations by crown ether diphosphonic acid $\underline{4}$, $Ca^{2+}$ and $Sr^{2+}$ are the appropriate sizes, but lager $Ba^{2+}$ may be due to favorable formation of a sandwich type complex between the crown ether cavity and the dianion of the deprotonated crown ether phoaphonic acid moiety.