• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Macromolecular Research
• /
• v.16 no.1
• /
• pp.45-50
• /
• 2008

This study examined the swelling behavior and in vitro release of a model drug, tetracycline-HCl, from alginate and alginate-polyaspartate (Alg-PASP) composite gel beads. The alginate and Alg-PASP composite beads were prepared using an ionic crosslinking method with aqueous $Ca^{2+}$. Their microporous morphology was observed by scanning electron microscopy. The swelling ratio of the beads in different media varied according to their composition, cross-linking density ($Ca^{2+}$ concentration), and pH of the aqueous medium. The in vitro release experiment of the tetracycline-HCl encapsulated beads in different media suggests that the release of the drug is governed mainly by the swelling properties of the polymer network. The presence of PASP was found to significantly influence the swelling properties and drug release profile.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.32-33
• /
• 1994

Poly(vinyl alcohol)(PVA) membranes crosslinked with Glutaraldehyde (GA) were prepared for the separation of acetic acid-water mixtures. For the preparation of the crosslinked membranes, dry PVA films were immersed for 2 days at 40$\circ$C in reaction solutions which contain different content of GA solution(25% GA in water), aceton and a catalyst, HCl. IR spectroscopy was employed to characterize the crosslinking reaction between hydroxyl groups in PVA and aldehyde groups in GA. Swelling measurements of the crosslinked membranes were carried out in both water and acetic acid to investigate the crosslinking density and swelling behaviour of the membranes.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.734-738
• /
• 2009

Biodegradable, pH-sensitive, glycol chitosan (GC) hydrogels were prepared using divinyl adipate (DVA) as a crosslinker and acetic acid as a catalyst. DVA has highly reactive double vinyl ester groups and GC contains a high density of hydroxyl groups, with two in every glucosamine unit. The transesterification reaction between vinyl esters and hydroxyl groups produced crosslinked GC hydrogels. The initial crosslinking reaction was monitored by measuring the viscosity of the reaction mixture. When DVA was added to the GC solution and heated to $50^{\circ}C$, the viscosity of the GC solution gradually increased, implying a crosslinking reaction and hydrogel formation. A new peak from the ester group was observed in the FTIR spectra of the GC hydrogels, confirming the crosslinking reaction. The synthesized GC hydrogel showed pH-dependent water absorbency, mainly due to the presence of amine groups ($-NH_2$) at the C-2 position of the glucosamine unit of GC. The water absorbency greatly increased at acidic pH and slightly decreased at alkaline pH. The GC hydrogel gradually degraded in $37^{\circ}C$ water due to hydrolysis of the ester bonds, which were intermolecular crosslinking sites. A red dye, 5-carboxyltetramethyl-rhodamine (CTMR), was entrapped in the GC hydrogels as a model compound. CTMR was released from GC hydrogels in two steps: an initial burst release mainly due to desorption and diffusion, and a second sustained release possibly due to gradual degradation.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.72-76
• /
• 2011

The physical properties of crosslinked poly(vinyl alcohol)(PVA) by natural dyes as crosslinking agents were investigated and a comparison was made with chemically crosslinked PVA by Polycup 172. It was found that natural anthocyanin and crocin made possible to crosslink PVA physically through the hydrogen bonding of OH in both PVA and natural dyes in the present with NaCl as a catalyst. The water swellability dramatically decreased and the physical crosslinking led to decreasing of crystallinity of PVA. The lowering of thermal stability was noticed in the physically crosslinked PVA compared to chemically crosslinked PVA due to its lower crosslink density. However even natural dyes have polysaccharides in their chain, their thermal stability was higher than uncrosslinked PVA.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.1-6
• /
• 2008

The adhesion behaviors and processability of NBR as a sealing material were investigated. In order to find the optimum formulation, the adhesive properties and processability were observed as the change of the contents of acrylonitrile (ACN) in NBR. Effects of Mooney viscosity, filler, plasticizer and crosslinking agent on the adhesion behaviors were also studied. The contents of ACN in NBR have great effects on adhesion behaviors and processability in NBR sealing. To know the optimum condition of roll mixing, degree of dispersion was investigated. It was confirmed that degree of dispersion was influenced by various factors such as mixing order, time, and temperature. The crosslinking system was studied as the observation of sulfur system, peroxide system, crosslinking density, and structure. From the variation of the dry condition and hexamine contents, the relation between adhesive and NBR was studied. These results show the adhesion properties and processability are dependent on the contents of ACN and crosslinking system.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.39-47
• /
• 2018

Styrene-butadiene rubber (SBR) is widely used in tire treads due to its excellent abrasion resistance, braking performance, and reasonable cost. Depending on the polymerization method, SBR is classified into solution-polymerized SBR (SSBR) and emulsion-polymerized SBR (ESBR). ESBR is less expensive and environmentally friendlier than SSBR because it uses water as a solvent. A higher molecular weight is also easier to obtain in ESBR, which has advantages in mechanical properties and tire performance. In ESBR polymerization, a surfactant is added to create an emulsion system with a hydrophobic monomer in the water phase. However, some amount of surfactant remains in the ESBR during coagulation, making the polymer chains in micelles clump together. As a result, it is well-known that residual surfactant adversely affects the physical properties of silica-filled ESBR compounds. However, researches about the effect of residual surfactant on the physical properties of ESBR are lacking. Therefore, in this study we compared the effects of remaining surfactant in ESBR on the mechanical properties of silica-filled and carbon black-filled compounds. The crosslinking density and filler-rubber interaction are also analyzed by using the Flory-Rehner theory and Kraus equation. In addition, the effects of surfactant on the mechanical properties and crosslinking density are compared with the effects of TDAE oil (a conventional processing aid).

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.561-566
• /
• 2008

NR composites with different curing systems were aged thermally at 60, 70, 80, and $90^{\circ}C$ for 2-185 days in a convection oven, and the changes in the crosslink density were investigated as a function of the accelerated thermal aging. The overall crosslink densities increased with increasing aging time irrespective of the aging temperatures and curing systems. The changes in crosslink density were enhanced by increasing the aging temperature. The degree of the increased crosslink density was in the following order: "the conventional cure system > the semi-EV system > the EV system". For short term thermal aging, the change in crosslink density with the aging time was complicated, particularly for low temperature aging. The activation energies of the change in crosslink density with thermal aging using the conventional and semi-EV cure systems increased and then remained relatively constant with increasing aging time, whereas that of the specimen with an EV cure system tended to increase linearly. The experimental results were explained by the dissociation of the existing polysulfidic linkages and the formation of new cross links through the crosslinking-related chemicals remaining in the sample.

• Textile Coloration and Finishing
• /
• v.5 no.3
• /
• pp.188-193
• /
• 1993

Aqueous polyurethanes(APU) were prepared from polypropylene glycol(PPG), dimethylol propionic acid(DMPA), and isophoron diisocyanate(IPDI) following a prepolymer mixing process. APUs were applied as binder for nonwoven fabrics processing. APU treated nonwoven fabrics generally showed better tear and tensile strength as compared with the untreated ones. In addition, depending on the soft segment length and crosslinking density of the PU, tear strength of APU treated fabrics was favorably compared with solvent type treated one. Similar results were obtained with microfiber nonwoven fabrics, however, the effect was less significant.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.278-282
• /
• 1990

Diffusion and partition of progesterone into the polyacrylamide gel was examined. Diffusion coefficient of progesterone decreased down to an asymptotic value as the concentration of the organic solvents in the diffusing medium increased. However the partition coefficient diminished steadily. Crosslinking density in the gel didn't affected the diffusion coefficient considerably but lowered the partition coefficient due to the contraction of pore volume of the gel. Progesterone showed higher diffusion coefficient as well as partition coefficient in the polyurethane than in the polyacrylamide gel, which seems to be ascribed to the difference in hydrophobicity, pore volume and pore size of the polymer matrix.