• 전기의세계
• /
• v.25 no.2
• /
• pp.100-106
• /
• 1976

A comparative study on thermal, static mechanical and dielectric characteristics were made over a temperature range of ca.20.deg.C to 320.deg.C and a frequency range of KHZ to MHZ band on low density polyethylene specimens crosslinked, respectively, by radiation and chemical method. The thermal property of both specimens shows that softening point appears to unchange by crosslinking, however, melting and liquidizing temperatures attain rapid increase at the imitiation of crosslinking. Mechanical properties show little difference to both specimens crosslinked by different method, further the behaviors were discussed in connection with the relaxation of molecular segments in amorphous phase. Dose dependent dielectric characteristics observed at ambient temperature under several fixed frequencies exhibit extremities at ca. 20 Mrad and the behaviors also were interpreted qualitatively by taking into consideration of dipole concentration change in amorphous phase together with the role of specimen geometry to the depth of oxidative layer. Observing frequency dependent dielectric characteristics, it was also proved that ionic conduction loss is appreciably greater in the specimen prepared by chemical method than that by radiation.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.3
• /
• pp.117-121
• /
• 1989

A metal complex, copper (II) L-proline was chemically bound to ethylene glycol dimethacrylate and divinylbenzene crosslinked chloromethylated polystyrene and they were used as chiral chelate resin matrix for column chromatography to resolve enantiomers of DL-amino acids. The L-enantiomers eluted first and the degree of resolution on the polymer crosslinked with ethylene glycol dimethacrylate was superior to the polymer crosslinked with divinylbenzene.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.537-543
• /
• 2008

Crosslinked agar-g-poly(acrylic acid) (x-agar-g-PAA) super absorbent with a water absorbency ($Q_{H2O}$) of approximately 660 g/g was synthesized by the copolymerization of agar with an acrylic acid monomer. KPS and MBA were used as the initiator and crosslinker, respectively. Grafting was performed in air. Infrared spectroscopy was used to identify the product of copolymerization. The optimum conditions to synthesize the x-agar-g-PAA superabsorbent were 0.1 g of agar, 0.1 g of the KPS initiator, for 15 min; 50% AA monomer, 0.005 g of the MBA crosslinker, for a propagation time of 5 min; and 1 M NaOH for 15 min to allow for saponification. The reaction temperature was $80{^\circ}C$.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.326-332
• /
• 2018

In this study,the result shows that polyvinyl alcohol-sodium alginate (PVA-SA) gel bead crosslinked with sodium sulfate are better among the different methods by comparing the relative mechanical strength, mechanical strength swelling and expansion coefficient of beads in water. Subsequently, anammox biomass entrapment by PVA-SA gel was introduced into continuous stirred tank reactor (CSTR). After 24 operation days, the nitrogen removal efficiency achieved 60%, while the nitrogen loading rate (NLR) was $0.14kgN/m^3/d$ and the experiment data indicated that PVA-SA gel bead crosslinked with sodium sulfate can be used to initiate anammox process. Furthermore, it is an alternative for culturing anammox in a long-term operation.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.573-579
• /
• 1996

Crosslinked potato starches (XP), from 2,400 to 1,900 anhydroglucose units per crosslinked (AGU/CL), were prepared by reacting with epichlorohydrin. Some of the physicochemical properties of the XPs were then compared with those of native potato and cowpea starches. Crosslinking decreased moisture, protein and ash contents but had no effect on phosphorus content. Water binding capacities of the XPs increased as the degree of crosslinking increased, and that of the XP with 2,100 AGU/CL approached the value of cowpea starch. The absorption maxima of the starch-iodine complex shifted from 594 to 580 nm. Granule size increased slightly and surface appearance of the granule became rough when crosslinked. Both native and crosslinked potato starches showed B type X-ray diffraction pattern, and the relative crystallinity was not affected by crosslinking. Gelatinization temperature and the heat of gelatinization, measured by differential scanning calorimeter (DSC), did not change within the range of crosslinking tested. From X-ray and DSC data, it was concluded that the crosslinking ocurred in the amorphous region of the starch granule.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.752-759
• /
• 2014

Crosslinked polyimides (PIs) were synthesized by reacting 4,4'-(hexafluoroisopropylidene)-diphthalic anhydride (6FDA) and 2,2'-bis(trifluoromethyl)benzidine (TFDB) with various ratios of the cross-linkable, end-capping agent cis-1,2,3,6-tetrahydrophthalic anhydride (CDBA) via ring-opening metathesis polymerization. Residual stress behaviors were investigated in-situ during thermal imidization of the crosslinked PI precursors using a thin film stress analyzer (TFSA) by wafer bending method. The thermal properties were investigated via differential scanning calorimetry (DSC), thermomechanical analysis (TMA), and thermogravimetric analysis (TGA). The optical properties were measured by ultraviolet-visible spectrophotometer (UV-vis) and spectrophotometry. All properties were interpreted with respect to their morphology of crosslinked networks. With increasing the amounts of the end-capping agent, the residual stress decreased from 27.9 to -1.3 MPa, exhibited ultra-low stress and high thermal properties. The minimized residual stress and enhanced thermal properties of the crosslinked PI makes them potential candidates for versatile high-density multi-layer structure applications.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.24-30
• /
• 1999

Crosslinked corn starches were prepared to increase their molecular weights and their performance as a component of Compozil system was evaluated and compared with that of potato starches. It was shown that greater improvements in retention and strength properties could be achieved when crosslinded cationic corn starches rather than conventional cationic potato starches were used especially at high conductivity because of their molecular rigidity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.897-900
• /
• 2001

Space charge distributions in silane crosslinked polyethylene (SXLPE)/ crosslinked polyethylene (XLPE) laminates was investigated using a pulsed electroacoustic (PEA) method. XLPE shows heterocharge while SXLPE shows homocharge. Positive charge is accumulated at the interface of SXLPE/XLPE laminate when applied electric field is more than 20 kV/mm. The charge profile at various temperatures was also acquired using temperature-controllable PEA system. Although applied electric field is only 8.6 kV/mm, positive interfacial charge starts to appear near 50$^{\circ}C$.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.11-12
• /
• 2008

Poly(ethylene oxide)(PEO) of molecular weight of 300,000 was crosslinked by UV irradiation in the presence of crosslinker. The photochemical crosslinking of PEO was enhanced by the addition of dimethacrylate crosslinkers in the film. Percent conversion of the polymer into gel as well as water absorbency were investigated gravimetrically. Gel fraction of PEO films increased with increasing crosslinker concentration. In the case of photocrosslinked PEO films with benzophenone, gel fraction reached about 95%. The thermal behavior of crosslinked PEO films was characterized by thermogravimetric analysis. The maximum decomposition temperature increased with increasing crosslinker concentration.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.250-251
• /
• 2000

The photoisomerization of the crosslinked and uncrosslinked polymer-pair with azo linkages was studied by the photoinduced birefringence. The amount of photoinduced birefringence of crosslinked polymer system was much smaller than that of uncrosslinked polymer system, even when varying pumping laser power, so the photoisomerization of an azo chromophores could be controlled by crosslinking process. (omitted)