• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.47-56
• /
• 2012

This paper describes the structural design and optimization of sinusoidally corrugated web girder by using EUROCODE (EN 1993-1-5). The optimum design methodology and characteristics of the optimal cross-section are discussed. We investigate a shear buckling and the concerned standards for corrugated web and explain the equations to obtain a critical stress according to buckling type. In order to perform optimization, we consider an objective function as minimum weight of the girder and use the constraint functions as slenderness ratio and stresses of flanges as well as corrugated web and deflection. Genetic Algorithm is adopted to search a global optimum solution for this mathematical model. For numerical example, the clamped girder under the concentrated load is considered, while the optimum cross-sectional area and design variables are analyzed. From the results of the adopted example, the optimum design program of the sinusoidally corrugated web girder is able to find the suitable solution which satisfied a condition subject to constraint functions. The optimum design shows the tendency to decrease the cross-sectional area with the yielding strength increase and increase the areas with load increase. Moreover, the corrugated web thickness shows a stable increase concerning the load.

• Structural Engineering and Mechanics
• /
• 제84권2호
• /
• pp.269-283
• /
• 2022

In this paper, a particular type of all-steel HSS brace members with a locally reduced cross-sectional area was experimentally and numerically investigated. The brace member was strengthened against local buckling with inner and outer boxes in the reduced area. Four single-span braced frames were tested under cyclic lateral loadings. Specimens included a simple steel frame with a conventional box-shaped brace and three other all-steel reduced section buckling-restrained braces. After conducting the experimental program, numerical models of the proposed brace were developed and verified with experimental results. Then the length of the proposed fuse was increased and its effect on the cyclic behavior of the brace was investigated numerically. Eventually, the brace was detailed with a fuse-to-brace length of 30%, as well as the cross-sectional area of the fuse-to-brace of 30%, and the cyclic behavior of the system was studied numerically. The study showed that the proposed brace is stable up to a 2% drift ratio, and the plastic cumulative deformation requirement of AISC (2016) is easily achieved. The proposed brace has sufficient ductility and stability and is lighter, as well as easier to be fabricated, compared to the conventional mortar-filled BRB and all-steel BRB.

• 한국임상수의학회지
• /
• 제40권3호
• /
• pp.225-229
• /
• 2023

In three dogs showing cerebellar ataxia, the onset of clinical signs varied from a young age of five months to age 13 years. Qualitative magnetic resonance imaging (MRI) revealed various degrees of cerebellar atrophy, and a tentative diagnosis of cerebellar cortical degeneration was made. Quantitative analysis using the brainstem to the cerebellar cross-sectional area ratio (BS:CBM ratio) and T2-signal intensity histograms were obtained to perform an objective evaluation. These techniques have the advantage of being easy and fast to evaluate. These quantitative analyses revealed the severity of cerebellar cortical degeneration in the three dogs as mild, moderate, and severe. Dogs 2 and 3 were identified as abnormal on the relative cerebrospinal fluid (CSF) space using T2-signal intensity histograms but were normal on the BS:CBM ratio. This suggests that the T2-signal intensity histograms may have higher sensitivity than BS:CBM ratio.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.49-59
• /
• 2008

The effects of design parameters on the pellet transport rate in the ejector system which is widely used in the production processes of automotive parts were investigated experimentally. The primary nozzle geometry, the area ratio (R) of nozzle exit cross-sectional area to mixing chamber cross-sectional area and the distance (S) from primary nozzle exit to mixing chamber entrance were considered as the design parameters. The area ratios of the primary nozzle were varied from R=0.10 to R=0.25, 0.30, 0.40 and 0.55. The primary nozzle was positioned at the non-dimensional distance (S/D) of 1.30, 1.87, 2.44, 3.00 and 3.75, normalized using the mixing chamber diameter (D). The design parameters were determined to run with high efficiency by measuring the pellets transport rate. The geometry and the area ratio (R) of the primary nozzle had an effect on the pellet transport rate of the ejector system, and the area ratio of R=0.3 was carefully selected after taking the minimum fluidization velocity and transport rate of applied pellets into account. The higher pellet transport rate with the variation of the distance (S/D) was observed at S/D of 2.44.

• 한국광학회지
• /
• 제17권5호
• /
• pp.437-446
• /
• 2006

본 연구에서는 레이저유도 에칭기술을 이용한 스테인레스강의 고세장비 미세채널 제조에 대하여 기술한다. 공정 변수 최적화와 반복에칭을 통하여 높은 세장비를 갖는 미세채널을 제조하였으며 제조된 미세채널은 레이저출력과 에칭용액의 농도를 적절하게 조절함으로써 U 형상과 V 형상 사이의 단면 구조를 가지며 열변형이 없는 우수한 표면 형상을 보였다. 채널과 채널 사이의 간격은 $150{\mu}m$ 또는 그 이하이며 $15{\sim}50{\mu}m$ 범위의 폭을 갖는 10 이상의 고세장비 미세채널이 제조되었다. 레이저출력, 레이저초점의 이송속도, 에칭용액의 농도 등의 공정 변수들이 제조된 채널의 폭, 깊이 그리고 단면 형상에 미치는 영향에 대하여 자세히 보고한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1169-1172
• /
• 2007

This paper deals with the free vibrations of cantilever arches with constant volume. Its cross-sectional shape is the regular polygon whose depth is varied with the linear functional fashion. The non-dimensional differential equations governing the free vibration of such arch are derived and solved numerically for calculating the natural frequencies. As the numerical results, the effects of arch parameters such as side number of cross section, section ratio and aspect ratio on the natural frequencies are reported in figures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2059-2065
• /
• 2008

In this paper, quasi-static crushing tests of composite circular tubes under axial compression load are conducted to investigate the energy absorption characteristics. Circular tubes used for this experiment are glass/epoxy (GFRP) composite tubes, which is fabricated by the filament winding method. One edge of the composite tube is chamfered to reduce the initial peak load and to prevent catastrophic failure during crushing process. Two suggested trigger mechanisms for the composite tubes are investigated. Crushing modes are mainly affected by thickness/diameter ratio, and average crushing loads are mainly affected by their cross-sections. Energy absorption characteristics vary significantly as a function of the tube geometry, trigger mechanism, t/D ratio and the cross-sectional shape.

• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.287-303
• /
• 2014

8 steel reinforced concrete (SRC) columns with the encased steel ratio of 13.12% and 15.04% respectively were tested under the test axial load ratio of 0.33-0.80 and the low-frequency cyclic lateral loading. The cross sectional area of composite columns was $500mm{\times}500mm$. The mechanical properties, failure modes and deformabilities were studied. All the specimens produced flexure failure subject to combined axial force, bending moment and shear. Force-displacement hysteretic curves, strain curves of encased steels and rebars were obtained. The interaction behavior of encased steel and concrete were verified. The hysteretic curves of columns were plump in shapes. Hysteresis loops were almost coincident under the same levels of lateral loading, and bearing capacities did not change much, which indicated that the columns had good energy-dissipation performance and seismic capacity. Based on the equilibrium equation, the suggested practical calculation method could accurately predict the flexural strength of SRC columns with cross-shaped section encased steel. The obtained M-N curves of SRC columns can be used as references for further studies.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.276-281
• /
• 2017

Background: The present study was carried out to assess the relationship between sickness absence and occupational stress, sleep quality, and amplitude and stability of circadian rhythm as well as to determine contributing factors of sickness absence. Methods: This cross sectional study was conducted on 400 randomly selected employees of an Iranian gas company. The data were collected using Pittsburgh sleep quality index, Karolinska sleepiness scale, circadian type inventory, and Osipow occupational stress questionnaires. Results: The mean age and job tenure of the participants were $33.18{\pm}5.64years$ and $6.06{\pm}4.99years$, respectively. Also, the participants had been absent from work on average 2.16 days a year. According to the results, 209 participants had no absences, 129 participants had short-term absences, and 62 participants had long-term absences. The results showed a significant relationship between short-term absenteeism and amplitude of circadian rhythm [odds ratio (OR) = 6.13], sleep quality (OR = 14.46), sleepiness (OR = 2.08), role boundary (OR = 6.45), and responsibility (OR = 5.23). Long-term absenteeism was also significantly associated with amplitude of circadian rhythm (OR = 2.42), sleep quality (OR = 21.56), sleepiness (OR = 6.44), role overload (OR = 4.84), role boundary (OR = 4.27), and responsibility (OR = 3.72). Conclusion: The results revealed that poor sleep quality, amplitude of circadian rhythm, and occupational stress were the contributing factors for sickness absence in the study population.

• The Korean Journal of Pain
• /
• 제34권4호
• /
• pp.417-426
• /
• 2021

Background: Non-cardiac chest pain (NCCP) is a common patient complaint imposing great costs on the healthcare system. It is associated with psychological factors such as depression. The aim of the present study is determining depression predictors in NCCP patients. Methods: The participants of this cross-sectional study were 361 NCCP patients. Patients filled out questionnaires concerning their sociodemographic, lifestyle, and clinical factors (severity of pain, type D personality, somatization, cardiac anxiety, fear of body sensations, and depression). Results: Based on multiple ordinal logistic regression, lack of physical activity (odds ratio [OR], 1.78; 95% confidence interval [CI], 1.09-2.87), sleep quality (OR, 2.98; 95% CI, 1.15-7.69), being a smoker (OR, 1.33; 95% CI, 2.41-4.03), present pain intensity (OR, 1.08; 95% CI, 1.05-1.11), type D personality (OR, 2.43; 95% CI, 1.47-4.03), and somatization (OR, 1.22; 95% CI, 1.15-1.3) were significant predictors of depression in NCCP patients. Additionally, multiple linear regression showed that being unmarried (β = 1.51, P = 0.008), lack of physical activity (β = 1.22, P = 0.015), sleep quality (β = 2.26, P = 0.022), present pain intensity (β = 0.07, P = 0.045), type D personality (β = 1.87, P < 0.001), somatization (β = 0.45, P < 0.001), and fear of bodily sensation (β = 0.04, P = 0.032) increased significantly depression scores in NCCP patients. Conclusions: Physicians should consider the predictors of depression in NCCP patients which can lead to receiving effective psychological consultations and reducing the costs and ineffectual referrals to medical centers.