1 |
Sun, J., Pan, P. and Wang, H. (2018), "Development and experimental validation of an assembled steel double-stage yield buckling restrained brace", J. Constr. Steel Res., 145, 330-340. https://doi.org/10.1016/j.jcsr.2018.03.003.
DOI
|
2 |
Takeuchi, T., Ozaki, H., Matsui, R. and Sutcu, F. (2014), "Out-of-plane stability of buckling-restrained braces including moment transfer capacity", Earthq. Eng. Struct. Dyn., 43(6), 851-869. https://doi.org/10.1002/eqe.2376.
DOI
|
3 |
Trutalli, D., De Stefani, L., Marchi, L. and Scotta, R. (2019), "Seismic capacity of steel frames braced with cross-concentric rectangular plates: Non-linear analyses", J. Constr. Steel Res., 161, 128-136. https://doi.org/10.1016/j.jcsr.2019.07.003.
DOI
|
4 |
Ward, K.M., Fleischman, R.B. and Federico, G. (2012), "A cast modular bracing system for steel special concentrically braced frames", Eng. Struct., 45, 104-116. https://doi.org/10.1016/j.engstruct.2012.05.025.
DOI
|
5 |
Dusicka, P. and Tinker, J. (2013), "Global restraint in ultra-lightweight buckling-restrained braces", J. Compos. Constr., 17(1), 139-150. https://doi.org/10.1061/(asce)cc.1943-5614.0000320.
DOI
|
6 |
El-Bahey, S. and Bruneau, M. (2011), "Buckling restrained braces as structural fuses for the seismic retrofit of reinforced concrete bridge bents", Eng. Struct., 33(3), 1052-1061. https://doi.org/10.1016/j.engstruct.2010.12.027.
DOI
|
7 |
Elghazouli, A.Y. (2003), "Seismic design procedures for concentrically braced frames", Proc. Inst. Civil Eng.: Struct. Build., 156(4), 381-394. https://doi.org/10.1680/stbu.2003.156.4.381.
DOI
|
8 |
Giugliano, M.T., Longo, A., Montuori, R. and Piluso, V. (2010), "Plastic design of CB-frames with reduced section solution for bracing members", J. Constr. Steel Res., 66, 611-621. https://doi.org/10.1016/j.jcsr.2010.01.001.
DOI
|
9 |
Hoveidae, N. and Rafezy, B. (2012), "Overall buckling behavior of all-steel buckling restrained braces", J. Constr. Steel Res., 79, 151-158. https://doi.org/10.1016/j.jcsr.2012.07.022.
DOI
|
10 |
Mirtaheri, M., Sehat, S. and Nazeryan, M. (2018), "Improving the behavior of buckling restrained braces through obtaining optimum steel core length", Struct. Eng. Mech., 65(4), 401-408. https://doi.org/10.12989/sem.2018.65.4.401.
DOI
|
11 |
Shen, J., Seker, O., Sutchiewcharn, N. and Akbas, B. (2016), "Cyclic behavior of buckling-controlled braces", J. Constr. Steel Res., 121, 110-125. https://doi.org/10.1016/j.jcsr.2016.01.018.
DOI
|
12 |
Simpson, B.G., Mahin, S.A. and Lai, J.W. (2017), "Experimental investigation of the behavior of vintage and retrofit concentrically braced steel frames under cyclic loading", Pacific Earthquake Engineering Research Center.
|
13 |
Takeuchi, T., Hajjar, J.F., Matsui, R., Nishimoto, K. and Aiken, I.D. (2010), "Local buckling restraint condition for core plates in buckling restrained braces", J. Constr. Steel Res., 66(2), 139-149. https://doi.org/10.1016/j.jcsr.2009.09.002.
DOI
|
14 |
Tremblay, O.E. and Dussault, R.V. (2012), "Finite element analysis of ductile fuses for W-shape steel bracing members", 15th World Conference on Earthquake Engineering (15WCEE).
|
15 |
Tremblay, R. (2002), "Inelastic seismic response of steel bracing members", J. Constr. Steel Res., 58, 665-701. https://doi.org/10.1016/S0143-974X(01)00104-3.
DOI
|
16 |
Vosooq, A.K. and Zahrai, S.M. (2013), "Study of an innovative two-stage control system: Chevron knee bracing and shear panel in series connection", Struct. Eng. Mech., 47(6), 881-898. https://doi.org/10.12989/sem.2013.47.6.881.
DOI
|
17 |
Wakabayashi, M., Nakamura, T., Katagihara, A., Yogoyama, H. and Morisono, T. (1973), "Experimental study on the elastoplastic behavior of braces enclosed by precast concrete panels under horizontal cyclic loading, Parts 1 & 2", Summaries of Technical Papers of Annual Meeting, 6, Architectural Institute of Japan.
|
18 |
Xie, Q. (2005), "State of the art of buckling-restrained braces in Asia", J. Constr. Steel Res., 61(6), 727-748. https://doi.org/10.1016/j.jcsr.2004.11.005.
DOI
|
19 |
ASCE/SEI 41-17 (2017), Seismic Evaluation and Retrofit of Existing Buildings, Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers.
|
20 |
Chen, Y., Chen, C., Jiang, H., Liu, T. and Wan, Z. (2019), "Study of an innovative graded yield metal damper", J. Constr. Steel Res., 160, 240-254. https://doi.org/10.1016/j.jcsr.2019.05.028.
DOI
|
21 |
AISC (2016), ANSI/AISC 341-16, Seismic Provisions for Structural Steel Buildings.
|
22 |
Sahoo, D.R. and Chao, S.H. (2010), "Performance-based plastic design method for buckling-restrained braced frames", Eng. Struct., 32(9), 2950-2958. https://doi.org/10.1016/j.engstruct.2010.05.014.
DOI
|
23 |
Nakamura, H. and Maeda Y,S.T. (2000), "Fatigue properties of practical scale unbonded braces", Nippon Steel Technical Report, Architectural Institute of Japan.
|
24 |
Razavi, S.A., Shemshadian, M.E., Mirghaderi, S.R. and Ahlehagh, S. (2011), "Seismic design of buckling restrained braced frames with reduced core length", The Structural Engineers World Congress, April.
|
25 |
Sabelli, R., Mahin, S. and Chang, C. (2003), "Seismic demands on steel braced frame buildings with buckling-restrained braces", Eng. Struct., 25(5), 655-666. https://doi.org/10.1016/S0141-0296(02)00175-X.
DOI
|
26 |
Razavi, S.A., Mirghaderi, S.R., Hosseini, A. and Shemshadian, M. E. (2012), "Reduced length buckling restrained brace using steel plates as restraining segment", Proceedings of the 15th World Conference on Earthquake Engineering, September.
|
27 |
Dassault Systems Simulia Corp. (2017), Abaqus/CAE 2017 User's Guide.
|
28 |
Kachooee, A., Kafi, M.A. and Gerami, M. (2018), "The effect of local fuse on behavior of concentrically braced frame by a numerical study", Civil Eng. J., 4(3), 655. https://doi.org/10.28991/cej-0309123.
DOI
|
29 |
Hoveidae, N., Tremblay, R., Rafezy, B. and Davaran, A. (2015), "Numerical investigation of seismic behavior of short-core all-steel buckling restrained braces", J. Constr. Steel Res., 114, 89-99. https://doi.org/10.1016/j.jcsr.2015.06.005.
DOI
|
30 |
Kachooee, A. and Kafi, M. A. (2018), "A Suggested method for improving post buckling behavior of concentric braces based on experimental and numerical studies", Struct., 14, 333-347. https://doi.org/10.1016/j.istruc.2018.04.003.
DOI
|
31 |
Kafi, M.A. and Kachooee, A. (2018), "The behavior of concentric brace with bounded fuse", Mag. Civil Eng., 78(2), 16-29. https://doi.org/10.18720/MCE.78.2.
DOI
|
32 |
Lee, K. and Bruneau, M. (2005), "Energy dissipation of compression members in concentrically braced frames: Review of experimental data", Struct. Eng., 131(4), 552-559. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(552).
DOI
|
33 |
Legeron, F., Desjardins, E. and Ahmed, E. (2014), "Fuse performance on bracing of concentrically steel braced frames under cyclic loading", J. Constr. Steel Res., 95, 242-255. https://doi.org/10.1016/j.jcsr.2013.12.010.
DOI
|
34 |
Mirtaheri, M., Gheidi, A., Zandi, A.P., Alanjari, P. and Samani, H.R. (2011), "Experimental optimization studies on steel core lengths in buckling restrained braces", J. Constr. Steel Res., 67(8), 1244-1253. https://doi.org/10.1016/j.jcsr.2011.03.004.
DOI
|
35 |
Mortezagholi, M.H. and Zahrai, S.M. (2020), "Analytical and numerical studies on reducing lateral restraints in conventional & all steel buckling restrained braces", J. Build. Eng., 32, 101513. https://doi.org/10.1016/j.jobe.2020.101513.
DOI
|
36 |
Miner, M.A. (1945), "Cumulative damage in fatigue", J. Appl. Mech., 12(3), A159-A164. https://doi.org/10.1115/1.4009458.
DOI
|
37 |
Cheraghi, A. and Zahrai, S.M. (2016), "Energy dissipation improvement in CBFs using perforated gusset plates", AJSR-Civil Envirom. Eng., 48(3), 339-349. https://doi.org/doi.org/10.22060/ceej.2016.616.
DOI
|
38 |
AlHamaydeh, M., Abed, F. and Mustapha, A. (2016), "Key parameters influencing performance and failure modes for BRBs using nonlinear FEA", J. Constr. Steel Res., 116, 1-18. https://doi.org/10.1016/j.jcsr.2015.08.038.
DOI
|
39 |
Andrews, B.M., Fahnestock, L.A. and Song, J. (2009), "Ductility capacity models for buckling-restrained braces", J. Constr. Steel Res., 65(8-9), 1712-1720. https://doi.org/10.1016/j.jcsr.2009.02.007.
DOI
|
40 |
BSI Standards Limited (2016), Metallic Materials-Tensile Testing, In Metallic Materials-Tensile Testing Part 1: Method of Test at Room Temperature.
|
41 |
Cheraghi, A. and Zahrai, S.M. (2016), "Innovative multi-level control with concentric pipes along brace to reduce seismic response of steel frames", J. Constr. Steel Res., 127, 120-135. https://doi.org/10.1016/j.jcsr.2016.07.024.
DOI
|
42 |
De Stefani, L., Scotta, R. and Lazzari, M. (2015), "Optimal design of seismic retrofitting of RC frames with eccentric steel bracing", Bull. Earthq. Eng., 13(2), 613-633. https://doi.org/10.1007/s10518-014-9633-x.
DOI
|
43 |
Razavi Tabatabaei, S.A., Mirghaderi, S.R. and Hosseini, A. (2014), "Experimental and numerical developing of reduced length buckling-restrained braces", Eng. Struct., 77, 143-160. https://doi.org/10.1016/j.engstruct.2014.07.034.
DOI
|
44 |
Della Corte, G., D'Aniello, M. and Landolfo, R. (2015), "Field testing of all-steel buckling-restrained braces applied to a damaged reinforced concrete building", J. Struct. Eng., 141(1), 1-11. https://doi.org/10.1061/(asce)st.1943-541x.0001080.
DOI
|
45 |
Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Shokri Amiri, M. (2019), "Investigation of the seismic behavior of brace frames with new corrugated all-steel buckling restrained brace", Int. J. Steel Struct., 19(4), 1225-1236. https://doi.org/10.1007/s13296-018-00202-2.
DOI
|
46 |
Pan, P., Li, W., Nie, X., Deng, K. and Sun, J. (2017), "Seismic performance of a reinforced concrete frame equipped with a double-stage yield buckling restrained brace", Struct. Des. Tall Spec. Build., 26(4), 1-10. https://doi.org/10.1002/tal.1335.
DOI
|
47 |
Shen, J., Seker, O., Akbas, B., Seker, P., Momenzadeh, S. and Faytarouni, M. (2017), "Seismic performance of concentrically braced frames with and without brace buckling", Eng. Struct., 141, 461-481. https://doi.org/10.1016/j.engstruct.2017.03.043.
DOI
|