• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.139-148
• /
• 2011

Objectives: This study investigated the effect of the strength and wetting characteristics of adhesives on the bond strength to dentin. The experimental adhesives containing various ratios of hydrophobic, low-viscosity Bis-M-GMA, with Bis-GMA and TEGDMA, were made and evaluated on the mechanical properties and bond strength to dentin. Materials and Methods: Five experimental adhesives formulated with various Bis-GMA/Bis-MGMA/TEGDMA ratios were evaluated on their viscosity, degree of conversion (DC), flexural strength (FS), and microtensile bond strength (MTBS). The bonded interfaces were evaluated with SEM and the solubility parameter was calculated to understand the wetting characteristics of the adhesives. Results: Although there were no significant differences in the DC between the experimental adhesives at 48 hr after curing (p > 0.05), the experimental adhesives that did not contain Bis-GMA exhibited a lower FS than did those containing Bis-GMA (p < 0.05). The experimental adhesives that had very little to no TEGDMA showed significantly lower MTBS than did those containing a higher content of TEGDMA (p < 0.05). The formers exhibited gaps at the interface between the adhesive layer and the hybrid layer. The solubility parameter of TEGDMA approximated those of the components of the primed dentin, rather than Bis-GMA and Bis-M-GMA. Conclusions: To achieve a good dentin bond, a strong base monomer, such as Bis-GMA, cannot be completely replaced by Bis-M-GMA for maintaining mechanical strength. For compatible copolymerization between the adhesive and the primed dentin as well as dense cross-linking of the adhesive layer, at least 30% fraction of TEGDMA is also needed.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.133-139
• /
• 2012

For the examination of nuclear medicine, myocardial scan is a good method to evaluate a hemodynamic importance of coronary heart disease. but, the automatized qualitative measurement is additionally necessary to improve the decoding efficiency. we suggests the creation of cardiac three-dimensional model and model of three-dimensional cardiac thickness as a new measurement. For the experiment, cardiac reduced cross section was obtained from SPECT. Next, the pre-process was performed and image segmentation was fulfilled by level set. for the modeling of left cardiac thickness, it was realized by applying difference equation of two-dimensional laplace equation. As the result of experiment, it was successful to measure internal wall and external wall and three-dimensional modeling was realized by coordinate. and, with laplace formula, it was successful to develop the thickness of cardiac wall. through the three-dimensional model, defects were observed easily and position of lesion was grasped rapidly by the revolution of model. The model which was developed as the support index of decoding will provide decoding information to doctor additionally and reduce the rate of false diagnosis as well as play a great role for diagnosing IHD early.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.1
• /
• pp.55-68
• /
• 2014

In this study, the beam-to column connections of concrete-encased-and-filled steel tube columns were tested under cyclic loading. Two specimens using steel beams and two specimens using precast concrete beams were tested. The dimension of the column cross section was $670mm{\pm}670mm$. The beam depths were 488mm and 588mm for the steel beams and 700mm for the precast concrete beams. The longitudinal bar ratios of the precast concrete beams were 1.1% and 1.5%. For the connections to the steel beams, continuity plates were used in the tube columns. For the connections to the PC beams, couplers were used for beam re-bar connections. The test results showed that except for a specimen, deformation capacities of the specimens were greater than 4% rotation angle, which is the requirement for the Special Moment Frame. Particularly, specimens using precast concrete beam showed excellent performances in the strength, deformation, and energy dissipation.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.131-149
• /
• 2008

A transmission tower was designed according to general and special load cases based on KEPCO Design Specifications. The special load case such as unbalanced load a cording to some broken wires has not been considered significantly. Therefore, this paper presents investigations on the stability and safety of main post members subjected to unbalanced load and design wind load. In this study, all cases totally considered. From the finite element analyses using LUSAS program, the stresses on the tower subjected to unbalanced load and design wind load were very high in comparison to the allowable stresses of the steel post member that was used. Some of the post member had higher stresses than the yield stress of the steel member. This paper also shows an example to improve the capacity of the post members using increased cross-section members. Based on the analyses results, when investigating the safety of the transmission tower, one must consider thenew design philosophy including ultimate strength of the member and reliability of the special loading cases.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.105-119
• /
• 2008

In steel deck bridges suffering directly on wheel load according to the number of serviced years, the occurrence of fatigue cracks increases in structural details, which includes the cross section parts of the longitudinal rib and transversal rib, and so on. Through the control method for these fatigue cracks the increased thickness of the steel deck plate or the application of retrofit detail to the inside of the longitudinal rib was observed to be effective. This study suggests structural details for the retrofitted and non-retrofitted longitudinal rib. The target details in this study are the connection parts of the lo ngitudinal and transversal rib, and the slit parts of transverse rib where fatigue cracks were frequently reported in previous studies. In the analyses, detailed structural analyses were performed as parameters, which include the shape, change of size and attached position. From the results the stress reduction in the target details was observed to be larger in the retroffited details. Also, the improvement of fatigue strength is more effective in the retrofitted details with the vertical rib than the bulkhead plate.

• 보존과학연구
• /
• s.32
• /
• pp.75-87
• /
• 2011

The materials analysis is important in conservation science for cultural assets since conservators can make appropriate decision of treatment and environment through understanding manufacturing, period and materials. Palsapumdo is the painting of Palsapum which was given by Yi Sun-shin from the emperor Shinjong in The Ming Dynasty. Palsapumdo painted with various pigments on the fabric has remained to adhere a sheet of lining paper. In this study, we carried out the fiber identification about the fabric and lining paper and the analysis of the pigments. This study identified a fabric and a lining paper and analised pigments for the painting. As a result of fabric analysis, it was confirmed as cotton because ribbon twists and shape of kidney bean in a cross section. After the analysis of lining paper, color changed to yellow by Graff "C" staining tests, and had short fiber and tracheid. Therefore, it is supposed to be a paper which is made of conifer pulp. In addition, the results of SEM-EDS, the pigments are indicated as Orpiment($As_2S_3$), Minium($Pb_3O_4$), Hematite($Fe_2O_3$), Emeraldgreen ($C_2H_3As_3Cu_2O_8$), Ultramarine [$2(Na_2O{\cdot}Al_2O_3{\cdot}2SiO_2){\cdot}Na_2S_2$], talc[$Mg_3Si_4O_{10}(OH)_2$], bariumsulfate($BaSO_4$) and brass.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.501-507
• /
• 2005

Small intestinal submucosa (SIS) had been widely used as a biomaterial without immune rejection responses. SIS sponges prepared by crosslinking with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). SIS powders dissolved in $3\%(v/v)$ acetic acid aqueous solution for 48hrs and freeze-dried. EDC solution ($H_2O$ : ethanol = 5 : 95) as a crosslink agent was used in concentration of 100mM. In vitro, rat-BMSCs seeded in SIS sponges and induced the osteogenesis for 28 days. We have characterized the osteogenic potential of rat-BMSCs in SIS sponges by alkaline phosphatase activity(ALP), n assay, SEM and RT-PCR for osteogenic phenotype. In SEM, all morphology of SIS sponges was regular and showed interconnected pore structure. By RT-PCR analysis, we observed type I collagen expression. These results demonstrate osteogenic differentiation of rat-BMSCs. In conclusion, we confirmed that the morphology of surface, cross-section, and side of SIS sponges were highly porous with good interconnections between each pores, which can support the surface of cell growth, proliferation, and differentiation. This result indicates that SIS sponge is useful for osteogenesis of BMSCs.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.3
• /
• pp.45-52
• /
• 1993

Surveyed results on the slope of grain and the twist of sawn lumber of Pinus koraiensis, Larix leptolepis, and Pinus densiflora were summarized as follows: 1. The slope of grain of Pinus koraiensis has a Z-grain in the stem axis. The slope of grain was found to be the lowest at near to the pith and then constantly increased. At the height of 0.2m from the base of stem. a cross section of 35 annual rings was found to have a repeatedly increasing and decreasing slope of grain and then constantly decreased. At the height of 1.2m to 7.2m from the base of stem, the slope of grain increased conspicuously until the 10th annual ring, after which it increased near to the bark with repeatedly increasing and decreasing trends. 2. Pinus densiflora has a S-grain in the stem axis. The lowest slope of grain was found at near to the pith, and the highest in the 10 to 35 annual rings from the pith. 3. Larix leptolepis has a S-grain. At the height of 3.2m from the base of stem, the big fluctuation of the slope of grain was found without any particular trend. 4. The slope of grain and the twist between natural and reforested timber of Pinus koraiensis were found to be almost the same trend in viewpoint of the annual ring. The maximum slope of grain of imported Siberian timber of Pinus koraiensis was found at the 10 annual rings, which was quite similar to that of native species in Korea, but the big difference of the twist was found at 140 annual rings. 5. The twist was little at the mature wood of reforested Pinus koraiensis and Siberians and the duplicated part of mature and juvenile woods of those. On the contrary, the twist was great at the duplicated part of mature and juvenile woods of Pinus koraiensis. 6. The twist of Larix leptolepis showed the S-direction which coincided with that of slope of grain. The twist was greatest at the part of juvenile wood and little at the duplicated part of mature and juvenile woods, and little difference of twist was found between mature and juvenile woods. 7. Siberian larix having a minimum slope of grain showed the lowest twist, and the twist at the duplicated part of mature and juvenile woods showed a middle level of both mature and juvenile woods' portions.

• Journal of Korea Water Resources Association
• /
• v.44 no.1
• /
• pp.9-22
• /
• 2011

A 1D numerical model for steady flow, based on the energy equation, was developed for natural rivers with emergent vegetations on floodplains and banks. The friction slope was determined by the friction law of Darcy-Weisbach. The composite friction factor of the each cross section was calculated by considering bottom roughness of the main channel and the floodplains, the flow resistance of vegetations, the apparent shear stress and the flow resistance caused by the momentum transfer between vegetated areas and non-vegetated areas. The interface friction factor caused by flow interaction was calculated by empirical formulas of Mertens and Nuding. In order to verify the accuracy of the suggested model, water surface elevations were calculated by using imaginary compound channels and the results of calculations were compared with that of the HEC-RAS. The sensitivity analysis was performed to confirm changed friction factors by vegetations density etc. The suggested model was applied to the reach of the Enz River in Germany, and estimated water surface elevations of the Enz River were compared with measured water surface elevations. This model could acceptably compute not only water surface elevations with low discharge but also that with high discharge. So, the suggested model in this study verified the applicability in natural rivers with emergent vegetations.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.95-103
• /
• 1972

The major purpose of this study is to collect the information related on the aspects of economic efficiency for solving the problems which are faced by farmers and areas, and providing scientific facts to farmers and related institutions for further development of sericultural sector in Korea. In order for obtaining the related information 12 sample areas among 23 major sericultural farming areas and 30 farm units in each area are selected and analyzed in this study. The fold suevey is made by member of this study team and graduate students in the Department of Sericultural Science with a prepared questionnaires. Cross-section and regression analysis methods are employed for processing the data in this study. The major findings obtained are as followings. 1. Sericultural earnings per Tanbo is, on the average, 22, 752 won in new cultivated areas and 29, 403 won in ordinary ones. There are big difference in the size of earnings by areas, especially, 46, 968 won in Kumo mountain area, compared with 16, 798 won in Yeoju and Yichun areas. General trend is finded that small scale farming units are made higher earnings and operating their farms efficiently. 2. Cocoon production expences per Tanbo is 16, 737 won in new cultivated areas and 19, 802 won in ordinary areas. There are also big difference in farming expences, especially, 27, 389 won in Sudang area, compared with 11, 689 won in Emjin area. 3. Sericultural income per Tanto is 10, 664 won in ordinary areas and 6, 898 won in new cultivated areas. Farmers in Kumo mountain area make the highest income of 21, 164 won and lowest income of 1, 296 won in Sudang area. It can be generized that about 30-50 a sized farmers make higher income. 4. Land, labor and capital productivities estimated by fitting Cobb-Douglas functions in ordinary areas are higher than in new cultivated areas, especially, labor productivity is higher in ordinary areas. 5. Changsung, Kwangna, Yunsun and Kumo mountain areas are technically and economically efficient. Sudang and Mujinchang areas are technically successful but economically inefficient and Emjin and Honam areas are technically inefficient but economically efficient. YeojuYichun, Chunwon and West Kyongnam are technically and economically inefficient. Technical and economic improvement program should be implemented for these areas. 6. Estimated Internal Rate of Return (IRR) on capital investment in Chongwon are is 23.5 percent. It is economically feasible, if we consider 20 percent of opportunity cost of capital in our economy.