• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.317-325
• /
• 2020

Accurate estimation of spatial frequencies and phases for illumination patterns are essential to reconstructing super-resolution images in structured illumination microscopy (SIM). In this manuscript, we propose the improved component cross-correlation (ICC) algorithm, which is based on optimization of the cross-correlation values of the overlapping information between various spectral components. Compared to other algorithms for spatial-frequency and phase determination, the results calculated by the ICC algorithm are more accurate when the modulation depths of the illumination patterns are low. Moreover, the ICC algorithm is able to calculate the spatial frequencies and phases simultaneously. Simulation results indicate that even if the modulation depth is lower than 0.1, the ICC algorithm still estimates the parameters precisely; the images reconstructed by the ICC algorithm are much clearer than those reconstructed by other algorithms. In experiments, our home-built SIM system was used to image bovine pulmonary artery endothelial (BPAE) cells. Drawing support from the ICC algorithm, super-resolution images were reconstructed without artifacts.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.354-360
• /
• 2009

We investigate theoretically the tolerance of 40 Gbps phase-modulated (PM) duobinary signals using a vestigial sideband (VSB) filter on impairments which occurred in dense wavelength-division multiplexing (DWDM) systems, compared to the conventional duobinary signals. Our simulation results show that PM duobinary signals can't have the gain on the spectral efficiency achieved by utilizing the VSB filtering technique. In order to increase the spectral efficiency, they indispensably require to be transmitted at the optimum bandwidth of multiplexer (MUX) and demultiplexer (DEMUX) since they are susceptible to inter-channel crosstalk. It is also shown that the PM duobinary modulation format has a large tolerance on self-phase modulation (SPM) and cross-phase modulation (XPM) under the condition which MUX and DEMUX have been tuned at an optimum bandwidth; it has 1.2 dB power penalty at the fiber launching power (FLP) of 15 dBm and the channel spacing of 50 GHz.

• Journal of Advanced Navigation Technology
• /
• v.7 no.1
• /
• pp.14-21
• /
• 2003

We investigated the optimum pump light power compensating distorted WDM signal due to both chromatic dispersion and self phase modulation (SPM). The considered system is $3{\times}40$ Gbps intensity modulation direct detection (IM/DD) WDM transmission system with path-averaged intensity approximation (PAIA) mid-span spectral inversion (MSSI) as compensation method. This system have highly nonlinear dispersion shifted fiber (HNL-DSF) as nonlinear medium of optical phase conjugator (OPC) in the mid-way of total transmission line. We confirmed that HNL-DSF is an useful nonlinear medium in OPC for wideband WDM transmission, and the excellent compensation is obtained when the pump light power of HNL-DSF OPC was selected to equalize the conjugated light power into the second half fiber section with the input WDM signal light power depending on total transmission length. By this approach, it is verified the possibility to realize a long-haul high capacities WDM system by using PAIA MSSI compensation method, which have HNL-DSF OPC with optimal pump light power depending on transmission length.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1634-1641
• /
• 2018

This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2000

We propose a modified nonlinear fiber optic interferometer which can serve to generate binary optical pulse sequences for CDMA networks, and to decode them. In one arm cross-phase modulation between a CW signal and a counter- or copropagating high-power pulse takes place in sequences of segment connected via VDM couplers. Preliminary experimental results on code generation as well as autocorrelation and crosscorrelation are presented, using Sagnac interferometer. As we expected, the experimental results show that the outputs of the interferometer device are not summed simply on the basis of power, but the sin-squared version of it. Arbitrary codes can in principle be implemented.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.392-396
• /
• 2005

A new structure of tunable wavelength converter based on XCM in SOA was tried and analyzed. This converter used single SOA and had very simple structure. In this paper, results were experimentally obtained and demonstrated. Pump signal was generated with NRZ $(PRBS\;2^{31}-1)$ and data rate 2.5 Gbps. WDM multi conveted signals showed more than 8.3 dB extinction ratio. For BER performance, all these converted signals had within 5.0 dB power penalty compared with the pump signal. With these results, we showed that this converter was suitable for 2.5 Gbps WDM multi-channel wavelength converting.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.30-35
• /
• 2020

In this paper, we analyzed the tracking error for the monopulse radar by controlling the phase difference, amplitude ratio and engagement angle of the cross-eye jammer. Cross-eye jamming is an important jamming method for monopulse radars, which causes a displacement in the radar receiving antenna input and misleads the radar's tracking angle. As a result of analyzing the tracking distance error of the radar while changing the engagement angle between the monopulse radar and jammer, the maximum distance error occurs when the engagement angle is 0° and the phase difference is 180°. It was confirmed that the error decreased to 70% or less of the maximum distance error into 45°~135°. In order to increase the efficiency of jammers, it is necessary to study rotary jammers or multi-channel jammers. This study will be very useful for the design of cross-eye jammers for aircraft and ships.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.328-335
• /
• 2008

The system performance of NRZ format in WDM transmission system with lumped dispersion management(DM) and optical phase conjugator(OPC) is compared with that of RZ format. It is confirmed that eye opening penalty(EOP) of both NRZ and RZ format in WDM transmission system having lumped DM combined with OPC are greatly improved than those in WDM system with only OPC. The optimal net residual dispersion(NRD) in the case of RZ format is decided to so small value that path-averaged dispersion coefficient become almost zero, while that in the case of NRZ format is decided to larger value, for the best improvement of overall WDM channels. It is also confirmed that EOP in the case of RZ format is more improved than that in the case of NRZ format in lumped DM with optimal NRD. This is resulted from that lumped DM combined with OPC suppress the signal distortion due to intrachannel four-wave mixing(IFWM) and intrachannel cross phase modulation(IXPM). Consequently, lumped DM combined with OPC proposed in this paper is effective technique to mitigate intrachannel nonlinearities in WDM transmitting RZ format.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.24-25
• /
• 2000

파장변환 소자는 최근에 급격히 발전하는 광네트웍을 구축하기 위하여 필수적인 소자로서 여러 가지 형태에 대한 연구개발이 진행되고 있다. 그중에서도, 최근에는 반도체 광증폭기로 형성된 방향성 결합기구조(semiconductor optical amplifier directional coupler)에서의 상호 이득 포화(XPM : cross-phase modulation)에 의한 파장변환에 대한 개념이 제안되고 가능성이 실험적으로 입증된 바 있다. 이런 구조의 파장변환 소자는 입력 광신호의 파워가 작을때는 위상 정합이 되어 반도체 광증폭기의 광모드가 완전히 결합되어 cross state로 변환된 파장의 광파워가 많이 출력되고, 신호 입력 파워가 증가함에 따라 결합이 감소하게 되어 Cross state에서의 출력 파워는 감소하게 된다. 이와 같은 소자는 입력 신호광과 변환된 신호광이 역방향으로 진행하는 경우 광필터가 필요없이 파장변환이 가능하고, 변환 후의 소광비가 향상되기 때문에 향후 다양한 형태로 응용될 가능성이 있으며, 적정 설계 및 성능 예측을 위해서는 시영역에서 모델링할 수 있는 방법론을 구축하는 것이 필요하다. 본 논문에서는 연산자 분리 방법$^{(1)}$ 을 적용하여 상술한 파장변환기를 해석하기에 적당하도록 시영역 동적 모델을 구현하고, 파장변환 특성을 여러 가지 면에서 분석하여 보았다. (중략)

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.323-326
• /
• 1998

The paper describes a theoretical and experimental study on the speed of the torsional elastic waves propagating in an axisymmetirc waveguide whose cross-sectional area varies periodically as an harmonic function of the axial coordinate. The approximate solution of the phase speed has been obtained using the perturbation technique for sinusoidal modulation of small amplitude. The experiment verifying the theoretical result consists of transmitting and receiving torsional waves by magnetostriction and measuring the wave speed in the waveguides with threaded surfaces.