• 제어로봇시스템학회논문지
• /
• 제5권5호
• /
• pp.558-567
• /
• 1999

X-ray laminography and DT(digital tomosynthesis) that can form a cross-sectional image of 3-D objects promis to be good solutions for inspecting interior defects of industrial products. DT is a kind of laminography technique and the difference is in the fact that it synthesizes the several projected images by use of the digitized memory and computation. The quality of images acquired from the DT system varies according to image synthesizing methods, the number of images used in image synthesizing, and X-ray projection angles. In this paper, a new image synthesizing method named 'log-root method' is proposed to get clear and accurate cross-sectional images, which can reduce both artifact and blurring generated by materials out of focal plane. To evaluate the quality of cross-sectional images, two evaluating criteria : (1) shape accuracy and (2) clearness of the cross-sectional images are defined. Based on these criteria, a series of simulations are performed, and the results show the superiority of the new synthesizing method over the existing ones such as averaging and minimum methods.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.27-37
• /
• 1993

응력 및 변위제약 하에 뼈대구조물의 초소중량설계를 얻기 위한 효율적인 방법을 제안한다. 주문제작이 빈번히 이루어지는 공학설계의 응용을 위해 다음의 5가지 단면형상을 고려하였다.(rectangular형, frame형, tube형, channel형 그리고 I형). 최적화 과정의 효율성을 증진시키기 위해 구조응답량(절점력, 변위)을 단면성질에 대해 1차 Taylor급수 전개했고 반면에 단면치수를 설계변수로 고려하였다. 제안된 방법의 효율성과 신뢰성을 보이기 위해 수치예를 통해 다른 방법에 의한 결과와 비교하였다. 그 결과 구조해석의 수를 크게 감소시킬 수 있었으며 뼈대구조물의 최적화에 매우 효율적으로 적용될 수 있음을 알게 되었다.

• 대한의용생체공학회:의공학회지
• /
• 제24권5호
• /
• pp.421-425
• /
• 2003

한 개 척추 운동 분절에 대한 유한요소 모델을 이용하여 수직 충격력이 가해질 경우 발생되는 척추 경막의 교합을 해석 하였다. 교합은 수직 충격력의 지속 시간 변화에 따른 골편의 이동으로 인한 척추 경막의 단면적 변화를 계산하여 계량화 하였다. 계산 결과 8∼12ms 의 충격 지속 시간에서 골편의 이동으로 인한 가장 큰 척추 경막의 단면적 변화가 나타났으며 $\Delta$t = 400 ms의 경우에서는 4%만의 척추 경막의 단면적 변화가 나타났다, 이와 같은 해석 결과는 6kN의 수직 정 하중이 가해질 경우에 발생되는 량이 유사한 값으로 이 정도의 충격 지속 시간은 준 정 하중 상태와 유사함을 보이고 있었다.

• 아태비즈니스연구
• /
• 제15권1호
• /
• pp.335-352
• /
• 2024

Purpose - Low fertility rate is a serious problem, and this study analyzes factors affecting total fertility rate using panel data from 16 metropolitan cities and provinces in Korea from 2000 to 2022. Design/methodology/approach - Estimating the SAR model considering the weak cross-sectional dependence that exists in variables related to the regional total fertility rate, and using the DKSE estimation method considering the strong cross-sectional dependence. Findings - Estimation results considering weak and strong cross-sectional dependence were similar, confirming the robustness of the results. Female labor force participation rate has a positive effect on total fertility rate, and employment rate has no effect. However, the interaction term is a negative (-) sign. Crude marriage rate has a positive effect on total fertility rate, and apartment price has a slightly positive effect. Environmental factor has no effect, and policy factor has a negative effect. Research implications or Originality - In order for an increase in the female labor force participation rate to lead to an increase in the total fertility rate, qualitative improvements in female employment must be made. Financial investment policies for childbirth must increase their effectiveness. The problem of low fertility rate requires not only population policy but also social, economic, cultural, environmental, and policy conditions to be considered.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.189-194
• /
• 2015

Backside Ar ion milling technique for the preparation of cross-sectional transmission electron microscopy (TEM) specimens, and backside-ion milling combined with focused ion beam (FIB) operation for electron holography were introduced in this paper. The backside Ar ion milling technique offers advantages in preparing cross-sectional specimens having thin, smooth and uniform surfaces with low surface damages. The back-side ion milling combined with the FIB technique could be used to observe the two-dimensional p-n junction profiles in semiconductors with the sample quality sufficient for an electron holography study. These techniques have useful applications for accurate TEM analysis of the microstructure of materials or electronic devices such as arrayed hole patterns, three-dimensional integrated circuits, and also relatively thick layers (> $1{\mu}m$).

• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.101-105
• /
• 2016

Trap effect of groove is evaluated in a lubricating system using computational fluid dynamics (CFD) analysis. The simulation is based on the standard k-ε turbulence model and the discrete phase model (DPM) using a commercial CFD code FLUENT. The simulation results are also capable of showing the particle trajectories in flow field. Computational domain is meshed using the GAMBIT pre-processor. The various grooves are applied in order to improve lubrication characteristics such as reduction of friction loss, increase in load carrying capacity, and trapping of the wear particles. Trap effect of groove is investigated with variations in cross-sectional shape and Reynolds number in this research. Various cross-sectional shapes of groove (rectangular, triangle, U shaped, trapezoid, elliptical shapes) are considered to evaluate the trap effect in simplified two-dimensional sliding bearing. The particles are assumed to steel, and defined a single particle injection condition in various positions. The “reflect” boundary condition for discrete phase is applied to the wall boundary, and the “escape” boundary condition to “pressure inlet” and “pressure outlet” conditions. The streamlines are compared with particles trajectories in the groove. From the results of numerical analysis in the study, it is found that the cross-sectional shapes favorable to the creation of vortex and small eddy current are effective in terms of particle trapping effect. Moreover, it is found that the Reynolds number has a strong influence on the pattern of vortex or small eddy current in the groove, and that the pattern of the vortex or small eddy current affects the trap effect of the groove.

• 대한의용생체공학회:의공학회지
• /
• 제41권6호
• /
• pp.219-227
• /
• 2020

In this study, we tried to quantify the actual cross-sectional area inside the bore when scanning by the MRI system with various bore sizes. To this end, a comparative analysis was conducted by both of blueprint of each MRI equipment and actual measurement in the field. As a result of analysis, ACSA(Actual Cross-Sectional Area) in Ingenia CX, Elition X, uMR 780, Omega, Vida, Lumina, Architect, Premier is recorded as 171230, 232150, 242100, 309332, 230760, 230760, 229380 and 235990 ㎟, respectively ACSA% was 60.6, 60.3, 73.0, 70.0, 60.0, 60.0, 59.6, and 61,3%. In addition, DTB (Distance from Table top to Bore top) recorded 400, 407, 445, 495, 405, 405, 405, 403, and 412 mm. Through this study, it was confirmed that there is a difference between the bore size according to each MRI system and the actual cross-sectional area during MRI scanning. Accordingly, if we consider the internal actual area just not bore size at the clinical site, useful diagnostic images can be obtained in the end with better convenience.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.83-88
• /
• 2011

본 연구에서는 전기기기 및 가전기기 등의 배선으로 사용되는 비닐코드의 구조 및 특성을 제시하고, 에너지원의 종류에 따라 소손된 비닐평형코드(VFF, $1.25mm^2$)의 실체 사진 및 용융된 도체의 금속 단면 구조를 분석하였다. 정상 VFF는 소선 여러 가닥을 꼬아서 제작되었으며, 도체의 표면은 적갈색이다. 또한 도체의 금속 조직 분석에서 그레인이 연신된 것을 알 수 있었다. 일반 화염에 의해 소손된 VFF의 표면은 절연물이 탄화되어 도체의 표면에 융착되었고, 윤기가 없는 것을 알 수 있었다. 또한 용융 부분의 단면 구조 분석에서 일정한 모양의 보이드가 형성되었고, 전선 고유의 연신 구조는 확인할 수 없었다. 통전중인 VFF에 외부 화염이 인가되어 소손된 용융 도체의 단면 분석에서 전선 고유의 연신 구조는 없었고, 불규칙적인 보이드 및 주상 조직 등이 성장한 것을 알 수 있었다. 과전류에 의해 소손된 VFF는 표면이 고르게 탄화되었으며, 용융된 도체의 단면 구조 분석에서 수지상 조직의 성장이 확인되었다. 단락에 의해 용융된 VFF의 특성 분석에서 표면의 일부가 오염되었지만 약간의 윤기가 있고, 용융되어 재결합한 부분이 둥근 모양을 나타냈다. 또한 금속 현미경을 이용한 단면 구조 분석에서 경계면 및 주상 조직 등이 확인되었고, 용융된 도체 이외의 부분에서는 정상 구리와 같은 비정질체인 구조가 확인되었다.

• 한국가정과학회지
• /
• 제2권1호
• /
• pp.110-113
• /
• 1999

Clothing shape is principally described in seven factors that are composed of clothing design, clothing material, clothing size, pattern design, sewing method and body motion etc. The aims of this study was to measurement out-line space-shape variation of clothing fitness with body by using the image processing. The subjects for direct anthropometric measurements were 248 female college students aged from 19 to 22. The data were statistically analyzed by principal analysis and cluster analysis. The results selected one somatotype. for the out-line space-shape variation of clothing fitness with body, there dimensional clothing shapes measured. and cross-sectional clothing shape obtained by the measurement was considered to be space wave form. The out-line space-shape variation of clothing fitness with body was observed between the node number and amplitudes of clothing wave form, and node number was determined at the maxim of space-shape amplitude, and the space-shape amplitudes have related with aspect ratio of cross-sectional shape. (Korean J of Human Ecology 2(1) :110-113, 1999)

• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.768-773
• /
• 2005

A new approach for human foot modelling and last design based on the cross sectional method is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the foot 3D data and last 3D data. The cross section a surface of 3D foot for the 3D last, design modeling of free form geometric last shapes. The proposed last design scheme wraps the 3D last data surrounding the measured 3D foot data with the effect of deforming the last design rule The last design rule of the FFD is constructed on the FFD lattice based on foot-last shape analysis. In addition, the control points of FFD lattice are constructed with cross sectional data interpolation methods from the a finite set of 3D foot data. The deformed 3D last result obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the last designed with the proposed scheme has good performance.