• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.655-661
• /
• 2016

To develop scab-resistant pear (Pyrus spp.) varieties with fruits that are as crisp and juicy as Asian pears, a cross was made between 'Whangkeumbae' and 'Bartlett' varieties (P. pyrifolia ${\times}$ P. communis) at the Pear Research Institute of the National Institute of Horticultural & Herbal Science, Rural Development Administration, in 1994. Among the 285 seedlings, 'Greensis' was first selected in 2006 for its good eating quality and named in 2012 after regional adaptation tests in nine regions and ten experimental plots from 2007 to 2012. The tree showed a vigorous growth habit and semi-spreading characteristics, like 'Whangkeumbae'. The optimum fruit harvest date was also around Sept. 26 and fruit was round in shape and green in skin color at maturity. Average fruit weight was 470g, and the soluble solids content was $12.4^{\circ}Brix$. The flesh was very crisp and juicy, and had good eating quality. Its' leaf size was similar with 'Bartlett' and smaller than 'Whangkeumbae'. The average of full bloom date of 'Greensis' was determined as Apr. 26, which was six days later than 'Whangkeumbae' and similar with 'Bartlett'. S genotypes of 'Greensis' were identified as $S_4S_e$ by S-allele PCR product sequencing analysis. It seems that the $S_4$ allele was inherited from 'Whangkeumbae' and the Se allele from 'Bartlett'. 'Greensis' displayed strong resistance to scab disease caused by Venturia nashicola, similar to European pear cultivars like 'Beurre Hardy' and, 'Conference'. 'Greensis' was also highly resistant to black leaf spot (Alternaria kikuchiana) in the field

• Clinical and Experimental Pediatrics
• /
• v.46 no.9
• /
• pp.846-853
• /
• 2003

Purpose : Pneumoccocus is one of the most important causes of invasive infection through the childhood period and the prevelance of antibiotics resistance of pneumococcus is increasing worldwide. A 7-valent conjugate vaccine has been developed. It is important to know the prevalence of each serotype of pneumococci in the countries where the vaccine is used to estimate the coverage rate by the vaccine. Methods : One hundred and twenty seven strains of clinical isolates and 72 strains from healthy carriers recovered from Korean children during the period from 1997 to 2002 were subjected to determination of serotype by Quellung reaction and penicillin susceptibility with oxacillin disc diffusion test. Results : Forty-three per cent of clinical isolates were obtained from children under two years of age. Thirty strains(24%) were isolated from normally sterile body fluids. The frequent serotypes were 19F, 19A, 23F, 6A, 6B and 9V. Fifty-six per cent of the clinical isolates were represented in the current 7-valent protein conjugate pneumococccal vaccine, and 84% when the cross-reactive serotypes were included. Frequent serotypes of strains isolated from one to five year-old healthy children were 19F, 14, 11A, 23F, 18C, and 19A. Seventy-one per cent of the carrier strains were included in the 7-valent vaccine. Ninety-three per cent of the clinical isolates and 86% of carrier strains were not susceptible to penicilline. Conclusion : Fifty-six to 84% of pneumococci recovered from Korean children are covered by the current 7-valent protein conjugate pneumococcal vaccine and the prevalence of penicillin resistance was very high.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.301-307
• /
• 2017

A new barley(Hordeum vulgare L.) cultivar 'Dachung' having high forage yielding and good silage quality was developed at National Institute of Crop Science, RDA in 2015. This cultivar was derived from a cross of the 'Sunwoo' and 'Keunalbori1ho' in 2002. And it's promising line showed both high yield and lodging resistance through the preliminary and advanced yield trials(PYT, AYT) at Iksan from 2010 to 2012. It was designated as the 'Iksan479'. 'Iksan479' was conducted to regional yield trials(RYT) in six locations around Korea for three years from 2013 to 2015. And it was released as the name of 'Dachung'. It has erect plant type, growth habit of IV and green leaf. In the paddy field its heading date was April 24 and maturing date was May 26, same day with 'Youngyang'. Plant height of 'Dachung' was 99cm. Dachung's spikes per $m^2$ was 625. It has high rate of leaf blades, resistance to BaYMV(Barley Yellow Mosiac Virus) and better winter hardiness than that of 'Youngyang'. The average dry matter of 'Dachung' was about $11.9ton\;ha^{-1}$ in paddy field. And average feed quality of 'Dachung' was 9.0% of crude protein content, 31.3% of ADF (Acid Detergent Fiber), 54.4% of NDF (Neutral Detergent Fiber), 64.0% of TDN (Total Digestible Nutrients). 'Dachung' had grade I of silage quality. This cultivar would be suitable for the area above the daily minimum temperature of $-8^{\circ}C$ in January in Korean peninsula.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.733-741
• /
• 2008

In the present study, we comprehensively examined the associations of plasma levels of total adiponectin and high molecular weight (HMW) adiponectin with the features of cardiometabolic risks including body fat distribution, dyslipidemia, insulin resistance and inflammatory markers in a cross-sectional study of 110 treated hypertensive patients. Blood lipid profiles, high sensitivity C-reactive protein (hsCRP) and homeostasis model assessment of insulin resistance (HOMA- IR) derived from fasting glucose and insulin concentrations were determined. Plasma levels of tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$), interleukin-6 (IL-6) and intercellular adhesion molecule-1 (ICAM-1) were analyzed using ELISA. The results showed that plasma levels of HMW-adiponectin were negatively associated with body mass index (BMI, r = - 0.203, p < 0.05) and waist circumference (r = -0.307, p < 0.01), which was not shown in total adiponectin. Plasma levels of HMW-adiponectin were negatively associated with triglyceride (r = -0.223, p < 0.05) and positively associated with HDL-cholesterol (r = 0.228, p < 0.05). Plasma levels of adiponectin were positively associated with HDL-cholesterol (r = 0.224, p < 0.05). Plasma levels of HMW-adiponectin were negatively associated with hsCRP (r = -0.276, p < 0.01) and IL-6 (r = -0.272, p < 0.01). In addition, there were weak associations between plasma levels of HMWadiponectin and TNF-${\alpha}$ (r = -0.163, p = 0.07) and ICAM-1 (r = -0.158, p = 0.09). However, there were no significant associations of total adiponectin with inflammatory markers except hsCRP (r = -0.203, p < 0.05). Stepwise multiple linear regression analysis showed that only plasma levels of HMW-adiponectin was an independent factor influencing serum levels of hsCRP, a marker of systemic low grade inflammation, after adjusting for age, gender, BMI, waist circumference, alcohol intake, smoking status, blood lipids, total adiponectin and drug use (p < 0.01). These results suggest that HMW-adiponectin, rather than total adiponectin, is likely to be closely associated with the features of cardiometabolic risks in treated hypertensive patients and might be effective biomarker for the prediction of cardiovascular disease.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.

• Annals of Clinical Microbiology
• /
• v.21 no.4
• /
• pp.80-85
• /
• 2018

Background: The aim of this study was to comparatively evaluate the bactericidal effects of copper, brass (copper 78%, tin 22%), and stainless steel against methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VREFM), and multidrug-resistant Pseudomonas aeruginosa (MRPA). Methods: The isolates (MRSA, VREFM, MRPA) used in this study were mixed wild type 3 strains isolated from patients treated at Uijeongbu St. Mary's Hospital in 2017. These strains showed patterns of multidrug resistance. The lyophilized strains were inoculated into and incubated for 24 hr in tryptic soy broth at $35^{\circ}C$. The initial bacterial inoculum concentration was adjusted to $10^5CFU/mL$. A 100-mL bacterial suspension was incubated in containers made of brass (copper 78%, tin 22%), copper (above 99% purity), and stainless steel at $35^{\circ}C$. Viable counts of bacteria strains were measured for 9 days. Results: In this study, the bactericidal effects of copper and brass on MRSA, VREFM, and MRPA were verified. The bactericidal effect of stainless steel was much weaker than those of copper and brass. The bactericidal effect was stronger on MRPA than on MRSA or VREFM. Conclusion: To prevent cross infection of multidrug resistant bacteria in hospitals, further studies of longer duration are needed for testing of copper materials on objects such as door knobs, faucets, and bed rails.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.324-327
• /
• 2009

A new sprout-soybean cultivar, "Galchae" was developed at the National Institute of Crop Science (NICS) in 2008. Galchae was selected from a cross between YS1287 and Jinju#1. The preliminary, advanced, and regional yield trials to evaluate the performance of Iksan 64 were carried out from 2005 to 2008. This cultivar has a determinate growth habit with purple flower, brown pubescence, brown seed coat, brown hilum, rhomboid leaflet shape and small seed size (8.4 grams per 100 seeds). The maturity date of "Galchae" is 6 days later than the check variety, "Dawon". It has good seed quality for soybean-sprout and resistance to lodging. This cultivar has resistance to soybean mosaic virus (SMV) and necrotic symptom (SMV-N). The average yield of "Galchae" was 2.51 ton per hectare in the regional yield trials (RYT) for double cropping carried out for two years from 2007 to 2008.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.649-653
• /
• 2009

"Cheongan" is a new japonica rice variety developed from a cross between SR15225-B-22-1-2-1 and Iksan431 in summer season, 1997 by National Institute of Crop Science, RDA. The line SR15225-B-22-1-2-1 has good canopy architecture and multi-disease and insect resistance, and Iksan431 has translucent milled rice and good eating-quality. Heading date of Cheongan is August 13 in central lowland and mid-mountainous areas. "Cheongan" having culm length of 84 cm shows relatively semi-erect pubescent leaf blade and rigid culm, tolerance to lodging with and good canopy architecture. This variety has 14 tillers per hill and 126 spikelets per panicle. It shows tolerance to heading delay and spikelet sterility comparable to Hwaseongbyeo when exposed to cold stress. Leaf senescence of Cheongan progresses slowly during the ripening stage and the viviparous germination ratio was 59 %, similar to that of Hwaseongbyo. "Cheongan" shows moderately resistance to blast disease, but susceptible to stripe virus and brown planthopper. The milled rice of "Cheongan" exhibits translucent, clear non-glutinous endosperm and medium short grain. It shows similar amylose content of 18.7%, gelatinization temperature, and similar palatability of cooked rice compared to Hwaseongbyeo. The milled rice yield of this cultivar is about 5.54 MT/ha at ordinary season culture in local adaptability test for three years. Especially, "Cheongan" has better milling properties of higher 98.4% and 73.9% in the percentage of head rice in milled rice and milling recovery of head rice, respectively, than those of Hwaseongbyeo. "Cheongan" could be adaptable to the central and mid-southern plain area, and mid-western coastal area of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.324-327
• /
• 2008

'Onnuri' is a japonica rice cultivar developed from the cross between 'Milyang 165' and HR14732-B-67-2-3 at Honam Agricultural Research Institute (HARI), NICS, RDA, in 2005. This cultivar has a short grain shape and about 121 days growth duration from transplanting to harvesting in Korean climate condition. In reaction to biotic and abiotic stresses, it shows resistance to blast, bacterial blight pathogen from $K_1$ to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled kernel of 'Onnuri' is translucent with non-glutinous endosperm. It has about 18.6% of amylose content and better palatability of cooked rice compared with 'Chucheongbyeo' cultivated in Kyunggi province. The milled rice yield of 'Onnuri' is about 5.94 MT/ha under the standard fertilizer level of the ordinary transplanting cultivation. 'Onnuri' would be adaptable to southern plain of Cheonan, middle-northern plain, and southern mid-mountainous of Korea.