• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.216-224
• /
• 2005

Chromatography has now been used successfully to provide the requisite purity for human plasma-derived biop-harmaceuticals such as coagulation factors and immunoglobulins. Recently, increasing attention has been focused on establishing efficient cleaning procedures to prevent potential contamination by microorganisms as well as carry-over contamination from batch to batch. The purpose of present study was to develop a cleaning validation system for the assurance of virus removal and/or inactivation during chromatography process. In order to establish an assay system for the validation of virus clearance during chromatography cleaning process, a quantitative real-time PCR method for porcine parvovirus(PPV) was developed, since PPV, a model virus for human parvovirus B19, has a high resistance to a range of physico-chemical treatment. Specific primers for amplification of PPV DNA was selected, and PPV DNA was quantified by use of SYBR Green I. The sensitivity of the assay was calculated to be 1.5 $TCID_{50}/ml$. The established real-time PCR assay was successfully applied to the validation of PPV removal and cleaning during SP-Sepharose cation chromatography for thrombin purification and Q-Sepharose anion chromatography for factor VIII purification. The comparative results obtained by real-time PCR assay and infectivity titrations suggested that the real-time PCR assay could be a useful method for chromatography cleaning validation and that it could have an additive effect on the interpretation and evaluation of virus clearance during the virus removal process.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.556-561
• /
• 2001

We prepared a new a SOS(silicon-on-silicide) wafer pair which is consisted of Si(100)/1000$\AA$-NiSi Si (100) layers. SOS can be employed in MEMS(micro- electronic-mechanical system) application due to low resistance of the NiSi layer. A thermally evaporated $1000\AA$-thick Ni/Si wafer and a clean Si wafer were pre-mated in the class 100 clean room, then annealed at $300~900^{\circ}C$ for 15hrs to induce silicidation reaction. SOS wafer pairs were investigated by a IR camera to measure bonded area and probed by a SEM(scanning electron microscope) and TEM(transmission electron microscope) to observe cross-sectional view of Si/NiSi. IR camera observation showed that the annealed SOS wafer pairs have over 52% bonded area in all temperature region except silicidation phase transition temperature. By probing cross-sectional view with SEM of magnification of 30,000, we found that $1000\AA$-thick uniform NiSi layer was formed at the center area of bonded wafers without void defects. However we observed debonded area at the edge area of wafers. Through TEM observation, we found that $10-20\AA$ thick amourphous layer formed between Si surface and NiSix near the counter part of SOS. This layer may be an oxide layer and lead to degradation of bonding. At the edge area of wafers, that amorphous layer was formed even to thickness of $1500\AA$ during annealing. Therefore, to increase bonding area of Si NiSi ∥ Si wafer pairs, we may lessen the amorphous layers.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.2
• /
• pp.151-159
• /
• 2006

Background : Excision repair cross complementing gene 1 (ERCC1) not only has a protective role against carcinogens, but plays an important role in cisplatin-resistance via the repair of cisplatin-DNA adducts. This study investigated the association between the ERCC1 expression levels in sputum and survival after cisplatin-based chemotherapy in patients with inoperable non-small cell lung cancer (NSCLC). Methods : Using the sputum collected from 67 inoperable (stage IIIa-IV) NSCLC patients treated with either taxanes (33 cases) or gemcitabine (34 cases) plus cisplatin, the relative expression levels of ERCC1 and the expression of the tumor specific antigen, MAGE, were examined by the quantitative RT-PCR and RT-PCR, respectively. The response and survival were compared with the relative level of ERCC1 or MAGE expression and the treatment modality. Results : In the sputum, ERCC1 and MAGE was detected in 74.6% and 40.2% of patients, respectively. Using the median ERCC1 level, the patients were classified as having high or low ERCC1 expression. The median overall survival (MST) was significantly longer in patients with a high ERCC1 expression level than those with a low expression level (84 weeks vs. 44 weeks respectively, P=0.017). In the taxene-based treatment group, the MST was longer than the gemcitabine group (79 weeks vs. 47 weeks, respectively, P=0.03). The levels of ERCC1 were significantly higher in patients who were MAGE-positive (P=0.003). In the MAGE-negative patients, the MST was longer in the high ERCC1 group (103 weeks vs. 43 weeks, P=0.008), but not in the MAGE-positive patients (62 weeks vs. 44 weeks, P=0.348). Conclusion : ERCC1 expression in the sputum can be a prognostic factor for survival after chemotherapy in patients with inoperable NSCLC.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.23-29
• /
• 2018

'Dakyeong' (Avena sativa L.), a winter oats for forage use, was developed by the breeding team at National Institute of Crop Science, RDA in 2016. It was derived from a cross between 'CI7505'(IT133304) and 'Swan'(IT197920). Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Iksan and Jeonju, respectively. After preliminary and advanced yield test for 2 years, 'SO2004009-B-B-10-8-3-9', designated as a line name of 'Gwiri91', were subsequently evaluated for earliness and forage yield during 3 years in four parts such as Jeju (upland), Yesan (upland), Iksan (upland), and Jeonju (paddy), from 2014 to 2016, and finally named as 'Dakyeong'. Cultivar 'Dakyong' has leaves of dark green color, thick diameter culm and long grain of brown color. Over 3 years, the heading date of 'Dakyeong' was about 5 days earlier than that of check cultivar 'Samhan' (April 30 and May 5, respectively), and their average forage dry matter yield harvested at milk-ripe stage was higher 12% ($15.7tone\;ha^{-1}$) than $14.0tone\;ha^{-1}$ of check cultivar. Cultivar 'Dakyeong' was lower than the check cultivar 'Samhan' in terms of the protein content (6.1% and 7.0%, respectively) and total digestible nutrients (62.1%, and 62.5%, respectively), while the TDN yield was more than the check ($7.79tone\;ha^{-1}$ and $7.64tone\;ha^{-1}$, respectively). Fall sowing cropping of 'Dakyeong' is recommended only in areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$, and it should not be cultivated in mountain areas, where frost damage is likely to occur.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.26-32
• /
• 2014

'Dahan' (Avena sativa L.), a winter oat cultivar for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute Crop Science (NICS), Rural Development Administration (RDA) in 2011. It was derived from an original cross between $F_1$[Sprinter/73625] and 'Gwiri26'. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon. A line, 'SO99027-GB-B-113-4-4-3', was selected for cold tolerance and good agronomic characteristics and as a line name of 'Gwiri75'. The line 'Gwiri75' was subsequently evaluated for cold tolerance and forage yield during 3 years in four region such as Yesan, Iksan, Kimjae, and Jeju, from 2009 to 2011 and finally named as 'Dahan'. Though similar in heading date to the check cultivar Samhan, 'Dahan' had tall plant length and lodging resistance. It's average forage dry matter yield harvested at milk-ripe stage was 15.6 ton $ha^{-1}$, compared with 14.1 ton $ha^{-1}$ of check cultivar. Cultivar 'Dahan' was lower to the check cultivar 'Samhan' in protein content (8.4% and 9.9%, respectively), while it was superior to the check cultivar in total digestible nutrients (TDN) (60.8% and 59.3%, respectively), and in TDN yield $ha^{-1}$ (9.5 ton and 8.4 ton, respectively). Fall sowing of 'Dahan' is recommended only in the areas where daily minimum mean temperatures are averaged higher than $-7^{\circ}C$ in January, and excluded in mountain area where frost damage is presumable.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.554-558
• /
• 2011

A single cross hybrid, 'Eolrukchal 1', is a bicolor waxy corn (Zea mays L.) developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2007. This hybrid, which has a high eating quality, was produced by crossing two inbred lines, KBW23 and KW33. KBW23 was a seed parent and KW33 was a the pollen parent of 'Eolrukchal 1'. Ear length and diameter of 'Eolrukchal 1' is 18.4 cm and 4.5 cm, respectively. The ratio of kernel set length/ear length is 89%, similar with that of a check hybrid, 'Chalok 1'. It is resistant to Exserohilum turcicum (Northern corn leaf blight) and its lodging resistance is higher than that of 'Chalok 1'. The yield of 'Eolrukchal 1' in fresh ear weight was 9.80 ton/ha and 14% higher than that of 'Chalok 1' in regional yield trials (RYT) from 2005 to 2007. A seed production of this hybrid has been well due to good match during crossing between the seed and the pollen parents. It is adaptable to the whole country except Jeju-do.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.448-453
• /
• 2019

'Haedamssal' is an early maturing and rice stripe virus disease-resistant cultivar adaptable for early-transplanting cultivation that was developed by the rice breeding team of the Department of Southern Crop, NICS, RDA, in 2014. This cultivar was derived from the cross YR25869 (YR21247-B-B-B-49-1/Sasanishiki BL4//Koshihikari) and YR25868 (Unkwang//YR21247-B-B-B-49-1/Sasanishiki BL4) made in the 2005/2006 winter season and was advanced to the F₅ generation by a bulk breeding method using rapid generation advance. To incorporate rice stripe virus resistance, marker-assisted selection on the RSV gene was conducted in 3-way and 6-way cross F₁ generation using the tightly linked marker RM6897. From testing in the replicated yield trial in 2011, a promising line YR26258-B-B-B-33-3 was selected and it was designated as 'Milyang276'. A local adaptability test of 'Milyang276' was performed at three locations from 2012 to 2014 and it was named as 'Haedamssal', which was a good eating quality variety. The culm length was 67 cm in yield trials, which was 4 cm shorter than 'Jopyeong'. The number of spikelets per panicle was lower than 'Jopyeong', whereas the number of tillers per hill was higher. This variety was resistant to RSV disease, bacterial blight, and leaf blast disease. The milled rice yield of 'Haedamssal' was 5.48 MT per ha at the early transplanting in the local adaptability test. 'Haedamssal' is well adapted to early transplanting cultivation in the southern plain area (Registration No. 6811).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.655-661
• /
• 2016

To develop scab-resistant pear (Pyrus spp.) varieties with fruits that are as crisp and juicy as Asian pears, a cross was made between 'Whangkeumbae' and 'Bartlett' varieties (P. pyrifolia ${\times}$ P. communis) at the Pear Research Institute of the National Institute of Horticultural & Herbal Science, Rural Development Administration, in 1994. Among the 285 seedlings, 'Greensis' was first selected in 2006 for its good eating quality and named in 2012 after regional adaptation tests in nine regions and ten experimental plots from 2007 to 2012. The tree showed a vigorous growth habit and semi-spreading characteristics, like 'Whangkeumbae'. The optimum fruit harvest date was also around Sept. 26 and fruit was round in shape and green in skin color at maturity. Average fruit weight was 470g, and the soluble solids content was $12.4^{\circ}Brix$. The flesh was very crisp and juicy, and had good eating quality. Its' leaf size was similar with 'Bartlett' and smaller than 'Whangkeumbae'. The average of full bloom date of 'Greensis' was determined as Apr. 26, which was six days later than 'Whangkeumbae' and similar with 'Bartlett'. S genotypes of 'Greensis' were identified as $S_4S_e$ by S-allele PCR product sequencing analysis. It seems that the $S_4$ allele was inherited from 'Whangkeumbae' and the Se allele from 'Bartlett'. 'Greensis' displayed strong resistance to scab disease caused by Venturia nashicola, similar to European pear cultivars like 'Beurre Hardy' and, 'Conference'. 'Greensis' was also highly resistant to black leaf spot (Alternaria kikuchiana) in the field

• Clinical and Experimental Pediatrics
• /
• v.46 no.9
• /
• pp.846-853
• /
• 2003

Purpose : Pneumoccocus is one of the most important causes of invasive infection through the childhood period and the prevelance of antibiotics resistance of pneumococcus is increasing worldwide. A 7-valent conjugate vaccine has been developed. It is important to know the prevalence of each serotype of pneumococci in the countries where the vaccine is used to estimate the coverage rate by the vaccine. Methods : One hundred and twenty seven strains of clinical isolates and 72 strains from healthy carriers recovered from Korean children during the period from 1997 to 2002 were subjected to determination of serotype by Quellung reaction and penicillin susceptibility with oxacillin disc diffusion test. Results : Forty-three per cent of clinical isolates were obtained from children under two years of age. Thirty strains(24%) were isolated from normally sterile body fluids. The frequent serotypes were 19F, 19A, 23F, 6A, 6B and 9V. Fifty-six per cent of the clinical isolates were represented in the current 7-valent protein conjugate pneumococccal vaccine, and 84% when the cross-reactive serotypes were included. Frequent serotypes of strains isolated from one to five year-old healthy children were 19F, 14, 11A, 23F, 18C, and 19A. Seventy-one per cent of the carrier strains were included in the 7-valent vaccine. Ninety-three per cent of the clinical isolates and 86% of carrier strains were not susceptible to penicilline. Conclusion : Fifty-six to 84% of pneumococci recovered from Korean children are covered by the current 7-valent protein conjugate pneumococcal vaccine and the prevalence of penicillin resistance was very high.