• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.117-120
• /
• 2011

소형 추력기의 반응기 설계에 영향을 주는 인자를 실험을 통해 확인하였다. 소형 추력기의 경우 압력 센서 포트를 통한 촉매의 유실이 발생할 수 있으므로 벽면 메쉬를 삽입하여 유실을 방지하였다. 실험결과 메쉬에 의한 성능 저하는 없었으며, 안정적인 질량유량의 공급이 추력기의 안정성에 가장 큰 영향을 주는 것으로 나타났다. 또한 반응기에서 급격한 압력저하가 발생할 경우 이는 바로 성능에 반영되므로 이러한 압력 저하를 최소화해야 안정적인 성능을 확보할 수 있다. 반응기 후단의 디스트리뷰터는 원형과 십자형 중 보다 안정적인 성능을 보이면서 구조적으로 견고한 십자형이 더 적합한 것으로 실험 결과 나타났다.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.151-155
• /
• 2014

This study compares the effects of flow on oil and suspended solids removal efficiencies in circular enhanced gravity plate separator equipped with coalescence medium. Coalescence medium acts to capture rising oil droplets and settling solid particles and assist in the coalescence of oil and coagulation of solid. The circular separator uses an upflow center-feed perforated-pipe distributor as the inlet. The co-current flow is achieved using 4 increasing sizes of frustum, whereas cross flow uses inclined coalescence plates running along the radius of the separator. The different arrangement gave the cross flow separator a higher coalescence plan area per operational volume, minimal and constant travelling distance for the oil droplets and particles, lower retention time, and higher operational flowrate. The cross flow separator exhibited 6.04% and 13.16% higher oil and total suspended solids removal efficiencies as compared to co-current flow.

• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.75-85
• /
• 2006

현재 우리나라 2차로도로 횡단면 설계기준은 설계속도별 최소 차로폭과 길어깨 기준은 있으나, 다양한 횡단면 구성안이 없어 전국이 획일적인 도로구조 형태를 보이고 있다. 따라서 본 연구에서는 2차로도로의 사고유형별 원인을 규명하고 그에 따른 교통운영 및 안전성 측면에서 횡단면 개선 방안을 수립하고, 평가척도를 선정하였으며, 평가과정을 통해 새로운 횡단면 설계기준을 제시하고 이를 검증하였다. 연구결과 같은 2차로도 도로폭 $9{\sim}12.9m$ 보다 $6{\sim}8.9m$ 도로가 사고율이 매우 높은 것으로 나타났으며, 대표적 사고유형들의 개선점은 차로 및 길어깨 확장으로 나타났다. 시뮬레이션 결과 도로폭 6$\sim$7m 는 교통량 1,000vph에서 급격한 지체 시간 상승을 보이고 있으나. 도로폭 10$\sim$11.5m도로는 1.200vph에서 약간의 변화를 보였다. 이 결과(pcu/일)를 국도와 지방도 일평균교통량(대/일)분포와 비교분석 하여 다양한 횡단면 기준을 제시하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.118-121
• /
• 2007

In recent years, the hyperspectral instruments with high spatial and high spectral resolution have become an important component of wide variety of earth science applications. The primary mission of the proposed Compact Airborne Imaging Spectrometer System (CAISS) in this study is to acquire and provide full contiguous spectral information with high quality spectral and spatial resolution for advanced applications in the field of remote sensing. The CAISS will also be used as the vicarious calibration equipment for the cross-calibration of satellite image data. The CAISS consists of six physical units: the camera system, the Jig, the GPS/INS, the gyro-stabilized mount, the operating system, and the power inverter and distributor. Additionally, the calibration instruments such as the integrated sphere and spectral lamps are also prepared for the radiometric and spectral calibration of the CAISS. The CAISS will provide high quality calibrated image data that can support evaluation of satellite application products. This paper summarizes the design, development and major characteristic of the CAISS.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.274-281
• /
• 2018

Experimental studies of the hydrodynamic performance of the draft tube conical spout-fluid bed (DCSF) were conducted using pharmaceutical pellets. The experiments were carried out in a DCSF consisted of two sections: (a) a conical section with the cross section of $120mm{\times}250mm$ and the height of 270 mm, (b) a cylindrical section with the diameter of 250 mm and the height of 600 mm. The flow characteristics of solids were investigated with a high speed camera and a pezoresistive absolute pressure transducer simultaneously. These characteristics revealed different flow regimes in the DCSF: packed bed at low gas velocities, fluidized bed in draft tube at higher gas velocities until minimum spouting, and spouted bed. The stable spouting was identified by the presence of two dominant frequencies of the power spectrum density of pressure fluctuation signature: (i) the frequency band 6-9 Hz and (ii) the frequency band 12-15 Hz. The pressure drops across the draft tube as well as the annulus measured in order to better recognize the flow structure in the DCSF. It was observed that the pressure drop across the draft tube, the pressure drop across the annulus, and the minimum spouting velocity increase with the increase in the height of draft tube and distance of the entrainment zone, but with the decrease in the distributor hole pitch. Finally, this study provided novel insight into the hydrodynamic of DCSF, particularly minimum spouting and stable spouting in the DCSF which contains valuable information for process design and scale-up of spouted bed equipment.