• 환경생물
• /
• 제32권4호
• /
• pp.403-412
• /
• 2014

This article chronicles key shifts in intellectual property regimes in the twentieth century as they related to the commercialization of academic research. The institutionalization and growth of scientific research in the research university in the twentieth century and the increasing awareness of its potential to promote technology innovation and economic growth posited an important question of the ownership of knowledge created in the academic setting, where knowledge was traditionally regarded as a common property among academic researchers. This paper shows the ownership of academic knowledge emerged as a key public policy and legal issue in the latter half of the twentieth century for academic researchers and government officials who pursue the commercialization of academic knowledge for private gain and public benefit. The resulting institutionalization of patent management in the research university and shifts in federal patent policy in turn opened a new legal avenue for the establishment of the private ownership of academic knowledge and the expansion of intellectual property rights in academia, especially in the area of biological and biomedical research. Reflecting upon historical shifts in intellectual property regimes in the twentieth century, this paper suggests recent controversies regarding ownership of biological knowledge and profit sharing in developing counties are linked to critical issues pertinent to the welfare of indigenous population, utilization of new natural resources, and sustainable development for humanity.

• 한국재료학회지
• /
• 제15권1호
• /
• pp.19-24
• /
• 2005

For the good combination of high-temperature strength, toughness and creep property, $9-12\%$ chromium steels are often used for gas turbine compressors, steam turbine rotors, blade and casing. In this study, the correlation of microstructural evolution and mechanical properties was investigated fur the specimens heat-treated at 600, 650 and $700^{\circ}C$ for 1000, 3000 and 5000 hrs. The microstructure of as-received specimen was tempered martensite with a high dislocation density, small sub-grains and fine secondary phase such as $M_23C_6$. Aging for long-time at high temperature caused the growth of martensite lath and the decrease of dislocation density resulting in the decrease in strength. However, the evolution of secondary phases had influence on hardness, yield strength and impact property. In the group A specimen aged at $600^{\circ}C\;and\;650^{\circ}C$, Laves phase was observed. The Laves phase caused the increase of the hardness and the decrease of the impact property. In addition, the abrupt growth of secondary phases caused decrease of the impact property in both A and B group specimens.

• 한국터널지하공간학회 논문집
• /
• 제10권4호
• /
• pp.337-347
• /
• 2008

한계변형률은 지반재료에 대한 새로운 역학적 물성치중에 하나이다. 터널공학에서 정립된 한계변형률 개념은, 터널현장에서 계측된 변위를 이용하여 굴착지반의 변형에 대한 한계치 설정에 활용될 수 있다. 본 연구에서는, 실제 터널시공현장에서 계측된 변위를 분석하여 터널에 대한 정량적 안정성을 평가한 것이다. 특히, 터널막장 전방의 선행변위를 이용하여, 터널총변위 관점에서 한계변형률 개념을 검토하였다. 그 결과, 선행변위 유무에 따른 터널안정성의 변화 특성을 한계변형률 도표상에서 파악할 수 있었다.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.491-501
• /
• 2020

Microtubules buckle under bending and torsion and this property has been studied for free microtubules before using orthotropic elastic shell model. But as microtubules are embedded in other elastic filaments and it is experimentally showed that these elastic filaments affect the critical buckling moment and critical buckling torque of the microtubules. To prove that, we developed orthotropic Winkler like model and demonstrated that the critical buckling moment and critical buckling torque of the microtubules are orders of higher magnitude than those found for free microtubules. Our results show that Critical buckling moment is about 6.04 nNnm for which the corresponding curvature is about θ = 1.33 rad /㎛ for embedded MTs, and critical buckling torque is 0.9 nNnm for the angle of 1.33 rad/㎛. Our results well proved the experimental findings.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.366-375
• /
• 1991

본 연구에서는 보 이론(beam theory)의 변위함수(displacement function)를 도입하고 전달행렬법을 이용하여 각 배관요소의 경계조건에 대한 고유 진동수와 배관 의 불안정성을 일으키는 유체의 임계속도(critical velocity)를 계산 평가하고, 실험 으로 입증된 Blevins의 결과치와 비교하였다.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.40-45
• /
• 2007

본 연구에서는 광전자 소자에 폭넓게 사용되는 ZnCdSe 화합물 반도체의 end-point인 CdSe의 유전함수 spectrum을 Vacuum Ultra Violet spectroscopic ellipsometry(타원편광분석법) 측정하여 분석하였다. 측정 결과는 변수화 모델을 이용하여 분석하였으며 그 결과 6 eV 이상에 존재하는 전자전이점들을 확인할 수 있었고 CdSe의 Critical Point(CP) 구조를 수치화 함으로써 온도나 화합물 함량에 따른 광특성 의존성 연구 등에 활용될 수 있는 database를 확보하였다.

• 한국콘텐츠학회논문지
• /
• 제17권3호
• /
• pp.138-149
• /
• 2017

본 연구의 목적은 북한 저작권법상의 저작재산권 제한제도에 대한 문제점을 연구 분석하는데 있으며, 이를 위해 남한의 저작권법과 비교하였다. 북한의 저작재산권 제한 제도는 북한체제의 큰 틀을 벗어나지 못하고 있다. 저작자의 독점적 배타적 권리와 이용자 측의 저작물 유통 간의 균형적인 운영에서 미비점이 많다. 또한 남한과 달리 저작권리의 양도, 처분, 상속, 신탁 등에 대한 내용 등 저작물의 이용에서도 허점이 있다. 북한 저작권리 제한은 개인적 차원의 복제와 번역, 도서관 등에서의 복제, 학교 교육 차원에서의 복제 방송 개작 등 전체 9가지로 열거되어 있다. 그러나 국제적 수준에 미흡한 조항이 많으며, 특히, 저작물의 공표, 이용목적, 이용범위 등 핵심적인 용어가 누락되어 있거나 해석상의 차이점을 보이고 있다. 따라서 북한의 저작권법은 그 요건을 충족시키기보다는 선언적 입법차원으로 판단된다. 향후 남북간 저작권리에 대한 본격적인 교류협력을 고려한다면 북한 저작권법에 대한 면밀한 연구 분석이 선행되어야 할 것이다.

• 경영과학
• /
• 제32권4호
• /
• pp.81-96
• /
• 2015

This paper models knowledge diffusion on an inter-organizational network. Based on literatures related to knowledge diffusion, the model considers critical factors that affect diffusion behavior including nodal property, relational property, and environmental property. We examine the relationships among network structure, knowledge search, and diffusion performance. Through a massive simulation runs based on the agent-based model, we find that the average path length of a network decreases a firm's cumulative knowledge stock, whereas the clustering coefficient of a firm has no significant relationship with the firm's knowledge. We also find that there is an interaction effect of network structure and the range of knowledge search on knowledge diffusion. Specifically, in a network of a larger average path length (APL) the marginal effect of search conduct is significantly greater than in that of a smaller APL.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권4호
• /
• pp.176-183
• /
• 2004

Systematic methods to calculate thermodynamic properties of carbon dioxide, HFC-134a and HCFC-22 are presented. First, application of a basic method to identify the saturation state with given temperature or pressure is attempted and the feasibility of auxil­iary equations is tested. Next, detailed procedures are suggested to tell a phase when tem­perature/pressure and another property are specified. Finally the Newton-Raphson method is applied to calculate unknown thermodynamic properties fixing the state with the two inde­pendent properties specified. The procedures described here are utilized to develop a computer program, which is used to find the relation between temperature and pressure with maximum isobaric heat capacity for super-critical carbon dioxide.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.51-54
• /
• 2003

Internal defects such as chevron crack occasionally occur in the process of cold extrusion or cold drawing. It is known that the existence and property of inclusion greatly influences the generation of the internal crack. However, in the plastic working field, research about the effect of the inclusion on the fracture is not theoretically analyzed. This paper describes effects of the physical property of inclusion on the internal fracture generation in the process. Prediction of fracture was evaluated by critical damage value calculated by the equation of Cockcroft & Latham and its change by the inclusion physical property such as size and stiffness was investigated.