• 펄프종이기술
• /
• 제40권4호
• /
• pp.66-73
• /
• 2008

When coated paperboard is printed, pressed into a groove with a creasing rule and folded, white line cracking occurs along the crease due to intensive mechanical pressure. The cracking will deteriorates product quality and waste resources. Effects of creasing pressure and ink dosage on the foldability of coated board were investigated. It was shown that applying an optimum pressure is important during creasing. When the pressure was too low, the crease formed was not sufficiently deep enough to enable precise folding. When an excess pressure was applied, fiber bonding was destroyed, resulted in unsatisfactory cracking. When the coated board was folded in machine direction (MD), long cracks were formed along MD. When it folded in cross direction (CD), the cracks were shorter and formed perpendicular to CD. Printing promoted cracking due to the decrease in flexibility of coated board. In addition, uneven ink film layer on the coating layer caused worse cracking.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.38-45
• /
• 2015

Fold cracking is one of quality troubles of coated papers. In this study, the fold cracking of high grammage ($250g/m^2$) coated paper made with the different pulp composition and layer structure of base paper was investigated. The single layered, high grammage base paper was prepared by mixing of hardwood and softwood bleached kraft pulp fibers with the different ratios. The high grammage coated paper showed the higher fold cracking than low grammage coated paper because of the increase in thickness. The increase in the content of softwood pulp fibers reduced the fold cracking in the case of high grammage coated paper. When the creasing process was conducted before folding process, the fold cracking of coated paper decreased. By manufacturing the base paper with multiply structure, the fold cracking of coated paper could be reduced significantly, especially when the BCTMP and OCC were used as a middle layer and the creasing process was carried out. The delamination of layers in base paper affected the fold cracking positively.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.44-51
• /
• 2009

Proper test methods and instruments for evaluating score or creasing crack have not been provided, although score crack trouble occurs frequently in manufacturing corrugated containers. Because existing creasability tester has the limitation of the available thickness of test piece and folding rate, it cannot be used for corrugated fiberboards with high thickness. In this study, we developed the laboratory test instrument and the method to determine the score or creasing crack of corrugated fiberboard. This instrument can evaluate folding resistance of corrugated board without restriction on the folding rate and thickness of specimen. Corrugated fiberboard had the different folding behavior from linerboard when it was creased. By using this test machine, score crack can be objectively determined by folding test piece to the certain folding angle with constant folding rate.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.279-292
• /
• 2023

Structural design against the progressive collapse has been a vital necessity for decades due to occasional tragic events. The question of whether designed structures against the progressive collapse are still robust if subjected to multi-hazard scenarios containing column removal and successive localized fires is ad-dressed in the current study. Two seven-story steel structures with an identical area but different structural configurations of 4- and 5-bays are designed against the progressive collapse; the structural components are also fireproofed for a 60 min fire resistance. The structures are then subjected to different column re-moval scenarios over different stories followed immediately by localized fires. Results indicate that the structures are not able to keep their stability under all of the considered scenarios; the 4-bay structure is more vulnerable than the 5-bay structure. It is also indicated that upper stories are more sensitive toward the considered scenarios than lower stories. To advance structural safety, two strategies are adopted: in-creasing the thickness of the insulation materials to reduce the thermal effects, or, increasing the safety fac-tor (ΩN) of the structures when designing against the progressive collapse. As for the first strategy, provid-ing a 35% and a 25% increase in the insulation thicknesses of the structural components of the 4-bay and 5-bay structures, respectively, can prevent a progressive collapse to trigger. As for the second strategy, in-creasing ΩN by 10% can enhance the structural integrity to where no collapse occurs under all of the sce-narios.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.355-358
• /
• 1998

This paper investigate the interaction of electromagnetic fields(EF's) in the human head with respect to the radiated waves from 1.8〔GHz〕 PCS terminal that the titled angles of a monopole antenna between the head and the horizontal axis of the terminal are 45, 60, 75 and 90 degrees respectively. And then, it is found the fact that the induced SAR distri bution in the model of the head gradually decreases by in creasing the titled angle.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.100-105
• /
• 1995

The aim of this study is to developed water proofing properties of cement mortar this study the effect of mix proportion on the basic characteristics of cement mortar was investigated. Also water absorption and permeability properties of mortar using several admixtures were tested. from this results, Physical properties of mortar is improved by using the sand witch has a broad particle size distribution. Also the sililca alumina powder is effective for decreasing the water permeability of mortar and zinc stearate is in creasing the water repellence property.

• 방재기술
• /
• 통권17호
• /
• pp.5-9
• /
• 1994

With a rapid development of economy, more high-rise buildings are being constructed in large cities than before. As a result steel members such as beams, columns make a great role of the building construction, and the need of them to be protected to have enough fire resistance is in-creasing . But conducting a real fire test to all the members is almost impossible. So prior to do conduct a real fire test of the protected steel members, evaluating the fire resistant rating of them by means of their specific properties might be economical things. This study is aimed to introduce the fire resistant rating of protected steel members without a real fire test through the related studies and data.

• 대한치과의사협회지
• /
• 제11권10호
• /
• pp.643-647
• /
• 1973

The auther has made the oral examination of 523 pregnant women-such as calculus, gingival disease, periodontal disease, and dental caries-who visit the dental department and obstetric department in National Medical Center in Seoul. After the above studies, results of the changes of the pregnant women's oral condition are following. 1. In creasing of calculus deposition due to the changes of saliva components. 2. Increasing of incidence of gingival and periodontal and pathological changes followed by calculus deposition. 3. Incidence of new cavities are not related to the pregnancy, but old cavities have become more progressive in dental caries.

• 한국정밀공학회지
• /
• 제5권3호
• /
• pp.81-90
• /
• 1988

In recent, the requirement of remote control of hychaulic system is in- creasing. The actuator unit whose output position is proportional to input electrical signal needs a pressure reducer and a dump valve. The pressure reducer provides a constant regulated pressure and filters contaminants. The dump valve supplies proper pressure to the pressure reducer and unloads when the system is not operated. In this thesis, dump valve and pressure reducer with auxiliary function are studied. The choke in the pressure reducer prevents actuator from supplying higher pressure than necessary pressure at beginning, and the spring constant affects on the dynamic characterisics. In dump valve, it is proved that diameter of servo-slide hold and choke diameter of dump plunger affects on damping response.

• 복식
• /
• 제30권
• /
• pp.167-181
• /
• 1996

Towards the second half of 20th century the fashion market has become increasely fragmented reflecting the pluality of cultures. As a result style no longer had time to accrue individuality and so people lost interest. In the aftermath of this fashion has turned its atten-tion to its materials for inspiration and inno-vation. Taking their inspiration for new working designers have began to explore diverse materials and expressive techniques of tex-ture. Textural expression can change the im-age of a garment even on with the same structural design. This study is to present the crinkle express-ive technique of texture through the applied examples in contemporary fashion and related backgrounds. The result of this study testified the import-ance of texture as plastic element through various techniques of crinkle; 1) creasing technique is reminiscent of the delphos of Fortuny by modern materials 2) twisting tech-nique is that finished garment is twisted and crumpled by hand 3) shirnking technique is recreated method that is crushed and tied for granting the human touch to the material.