Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지
DOI QR코드

DOI QR Code

Fold Cracking of High Grammage Coated Paper Depending on Pulp Composition and Structure of Base Paper

도공원지의 원료 조성 및 구조에 따른 고평량 도공지의 접힘 터짐

  • 심규정 (서울대학교 농업생명과학대학 산림과학부) ;
  • 윤혜정 (서울대학교 농업생명과학대학 산림과학부) ;
  • 오규덕 (서울대학교 농업생명과학대학 산림과학부) ;
  • 이학래 (서울대학교 농업생명과학대학 산림과학부) ;
  • 여승욱 ((주)LG화학 기술연구원) ;
  • 이용민 ((주)LG화학 기술연구원)
  • Received : 2015.07.17
  • Accepted : 2015.08.19
  • Published : 2015.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

Fold cracking is one of quality troubles of coated papers. In this study, the fold cracking of high grammage ($250g/m^2$) coated paper made with the different pulp composition and layer structure of base paper was investigated. The single layered, high grammage base paper was prepared by mixing of hardwood and softwood bleached kraft pulp fibers with the different ratios. The high grammage coated paper showed the higher fold cracking than low grammage coated paper because of the increase in thickness. The increase in the content of softwood pulp fibers reduced the fold cracking in the case of high grammage coated paper. When the creasing process was conducted before folding process, the fold cracking of coated paper decreased. By manufacturing the base paper with multiply structure, the fold cracking of coated paper could be reduced significantly, especially when the BCTMP and OCC were used as a middle layer and the creasing process was carried out. The delamination of layers in base paper affected the fold cracking positively.

Keywords

References

  1. Barbier, C., Folding of paper a literature survey, Dept. of Solid Mechanics, Stockholm, Sweden, Report 259, KTH (1997).
  2. Barbier, C., Larsson, P. L., and Ostlund, S., Experimental investigation of damage at folding of coated papers, Nord. Pulp. Pap. Res. J. 17:34-38 (2002). https://doi.org/10.3183/NPPRJ-2002-17-01-p034-038
  3. Ratto, P., Hornatowska, J., Changhong, X., and Terasaki, O., Cracking mechanisms of clay-based and GCC-based coatings, Nord. Pulp. Pap. Res. J. 26:485-492 (2011). https://doi.org/10.3183/NPPRJ-2011-26-04-p485-492
  4. Yang, A., Xie, Y., and Renjung, W., From theory to practice: Improving the fold crack resistance of industrially produced triple coated paper, TAPPI PaperCon Conf., Covington, KY, USA, May 1-4, pp. 1845-1858 (2011).
  5. Alam, P. and Toivakka, M., Balancing between fold-crack resistance and stiffness, J. of Compos. Mater. 43:1265-1283 (2011).
  6. Rioux, R., Bousfield, D. W., and Triantafillopoulos, N., Elastica stiffness and low load indentation measurements for the mechanical properties of coated papers, TAPPI PaperCon Conf., Dallas, TX, USA, May 34-7 (2008).
  7. Oh, K., Sim, K., Jung, Y. B., Youn, H. J., Lee, H. L., Lee, Y. M., and Yeu, S. U., Effect of coating binder on fold cracking of coated paper, Nord. Pulp. Pap. Res. J. 30:360-367 (2015). https://doi.org/10.3183/NPPRJ-2015-30-02-p360-367
  8. Sim, K., Youn, H. J., Oh, K., Lee, H. L., Han, C. S., Yeu, S. U., and Lee, Y. M., Fold cracking of coated paper: The effect of pulp fiber composition and beating, Nord. Pulp. Pap. Res. J. 27:445-450 (2012). https://doi.org/10.3183/NPPRJ-2012-27-02-p445-450

Cited by

  1. 핸드드립용 커피필터 제품을 위한 닥섬유 혼합 비율에 따른 한지의 물리적 특성 및 적용 가능성 평가 vol.26, pp.1, 2015, https://doi.org/10.20909/kopast.2020.26.1.33
  2. Coating factors influencing the fold cracking of coated papers vol.35, pp.3, 2015, https://doi.org/10.1515/npprj-2019-0051