• 제목/요약/키워드: creaming

검색결과 37건 처리시간 0.027초

Effect of the Difference in the High Molecular Weight Fraction of Whey Between Cow's Milk and Goat's Milk on Creaming Phenomenon

  • Masuda, T.;Taniguchi, T.;Suzuki, K.;Sakai, T.;Morichi, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권3호
    • /
    • pp.351-357
    • /
    • 2001
  • The rapid formation of a cream line cannot be observed in raw goat's milk standing at a low temperature. Although the poor creaming ability of goat's milk has been considered to be due to the small size of milk fat globules and the lack of euglobulin capable of being adsorbed on milk fat globules, there is much left to study. The present work attempted to elucidate a factor for poor creaming ability of goat's milk. The creaming ability of the experimental milks reconstituted from creams and skim milks separated from cow's milk or goat's milk was measured by the volume of the cream layer and the fat content of bottom layer. The polypeptides composition of the P1 the fraction (i.e., the high molecular weight fraction eluted near the void volume obtained by the gel filtration of whey) and milk fat globule membrane prepared from both milks were compared. It was found that the promotion of creaming originated from goat's skim milk was lower than that from cow's skim milk. The P1 fraction in goat's skim milk was less than that in cow's skim milk. The polypeptide (M.W. $4.3{\times}10^4$), found in the P1 fraction of cow's milk was not found in the P1 fraction of goat's milk. It is suggested that the poor creaming ability of goat milk is caused mainly by the difference from cow milk in the amount and the composition of the P1 fraction.

반응표면분석을 활용한 균질 효율 예측 (Prediction of Homogenization Efficiency using Response Surface Methodology)

  • 강호진;강신호;신용국
    • Journal of Dairy Science and Biotechnology
    • /
    • 제35권3호
    • /
    • pp.202-207
    • /
    • 2017
  • 본 연구에서는 반응표면분석법을 활용하여 균질 조건, 저장 온도, 저장 기간 등이 유지방의 크림화와 상층부와 하층부의 지방 함량 변화 등에 대해 미치는 영향을 분석하고, 최적의 균질 효율을 갖는 조건들을 예측하고자 실시하였다. 반응표면분석법의 독립변수로는 균질압, 저장 온도, 저장 기간을 설정하였고, -1, 0, 1의 3수준으로 20개의 실험구를 설계하여 종속변수인 creaming, USPHS code, 상층부의 $D_{4,3}$, 하층부의 $D_{4,3}$에 대해 실험을 실시하였다. 반응표면분석과 회귀분석 결과, 균질한 우유의 실험 데이터와 RSM에 의해 예측된 값들간의 상관계수는 0.8 이상의 상관성을 보였다. 반응표면분석의 최적화 결과, $10^{\circ}C$에서 15일의 저장 기간 동안 3 mm 이하의 크림화를 유지하기 위해서는 14 MPa 이상의 균질압이 요구되고, $20^{\circ}C$에서 15일의 저장 기간 동안 3 mm 이하의 크림화를 유지하기 위해서는 17 MPa 이상의 균질압이 요구된다. $10^{\circ}C$에서 15일의 저장 기간 동안 USPHS code를 10% 미만으로 유지하기 위해서는 16.8 MPa의 균질압이 요구되며, $20^{\circ}C$에서 15일 동안의 저장 기간을 유지하기 위해서는 23.1 MPa의 균질압이 요구된다.

라아드의 크림성 향상에 대한 에스테르교환의 효과 (Effect of Interesterification for Increasing Creaming Power in Lard)

  • 임혜경;김명애
    • 한국식품과학회지
    • /
    • 제25권6호
    • /
    • pp.730-735
    • /
    • 1993
  • 라아드의 크림성 향상에 대한 에스테르교환의 효과를 검토하기 위하여 시료유지의 이화학적 성실, 고체지 함량, consistency, 크림성을 측정하고, 크림에 대한 관능검사를 실시하였다. 에스테르교환 리아드는 SFC 5-30의 온도범위가 $10{\sim}33^{\circ}C$로서 라아드$16{\sim}30^{\circ}C$에 비하여, 저온부와 고온부가 각각 $6^{\circ}C,\;3^{\circ}C$씩 증가하였다. 에스테르교환 라아드는 라아드에 비해 각 온도별 consistency가 낮았으며, $10^{\circ}C$이하의 저온에서도 약 $2000g/cm^{2}$로서 급격한 증가가 없었다. 에스테르교환 라아드의 크림성은 155%로서 라아드 140%보다 증가했으며, 최대 over run의 소요시간이 1/2로 단축되어 크림성이 향상되었다. 최대 over run에서 크림의 관능평가 결과, 에스테르교환 라아드로 제조한 크림은 라아드의 크림보다 조직, 광택, 구용성은 다소 떨어졌으나, 끈기, 굳기가 개선되었다. 이상의 결과로 볼 때, 라아드는 에스테르교환에 의해 크림성이 향상되었으며, 특히 저온부의 가소성 범위가 증대됨으로써 겨울철 크림용 가공원료유지에 더욱 적합할 것으로 판단된다.

  • PDF

Effects of HLB value on oil-in-water emulsions: Droplet size, rheological behavior, zeta-potential, and creaming index

  • Hong, In Kwon;Kim, Su In;Lee, Seung Bum
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제67권
    • /
    • pp.123-131
    • /
    • 2018
  • Using mixed nonionic surfactants Span/Tween, we investigated the effects of HLB value on the O/W emulsion stability and rheological behaviors. In this study, MS-01 (Span 60 & Tween 60) and MS-02 (Span 80 & Tween 80) was used as mixed nonionic surfactants. We considered required HLB value 10.85 and selected corresponding HLB value range 8-13. The droplet size distributions, droplet morphology, rheological properties, zeta-potential and creaming index of the emulsion samples were obtained to understand the mechanism and interaction of droplets in O/W emulsion. The results indicated that optimal HLB number for O/W emulsions was 10.8 and 10.7, while using MS-01 surfactant and MS-02 surfactant respectively. MS-01 (HLB = 10.8) sample and MS-02 (HLB = 10.7) sample showed smallest droplet size and highest zeta-potential value. Rheological properties are measured to understand rheological behaviors of emulsion samples. All emulsion samples showed no phase separation until 30 days storage time at $25^{\circ}C$.

Roles of Fucoidan, an Anionic Sulfated Polysaccharide on BSA-Stabilized Oil-in-Water Emulsion

  • Kim, Do-Yeong;Shin, Weon-Sun
    • Macromolecular Research
    • /
    • 제17권2호
    • /
    • pp.128-132
    • /
    • 2009
  • Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

메칠셀룰로오스/Tween 20 경쟁 흡착이 메칠셀룰로오스 유화액의 안정도 특성에 미치는 영향 (Changes in the Stability Properties of Methylcellulose Emulsions as Affected by Competitive Adsorption Between Methylcellulose and Tween 20)

  • 홍순택
    • 한국식품영양과학회지
    • /
    • 제37권10호
    • /
    • pp.1278-1286
    • /
    • 2008
  • 본 연구는 MC와 저분자량 유화제 Tween 20 간의 경쟁 흡착 현상이 MC 유화액(1 wt% MC, 10 wt% n-tetradecane, 20 mM bis-tris, pH 7)의 안정도(크리밍 안정도 및 orthokinetic stability) 특성에 미치는 영향을 구명하고자 수행하였다. 크리밍 특성 변화는 시료 유화액의 크리밍 프로화일 및 지방구 평균 이동 속도($V_m$) 등을 비교하였고, orthokinetic stability는 전단시간(shear time)에 대한 지방구 크기 변화를 측정하여 평가하였다. 지방 함량을 달리하여(1$\sim$30wt%) 제조한 Tween 20 무첨가 MC 유화액의 경우 지방구 평균 이동 속도($V_m$)로 표현된 크리밍 안정도는 유화액 중 지방구 크기에 의존하는 경향을 보였다. 즉 지방구 크기가 클수록 안정도는 낮은 것으로 나타났다[$V_m$: 0.326 $\mu$m $min^{-1}$ ($d_{32}$: 0.32 $\mu$m)${\rightarrow}V_m$: 0.551 $\mu$m $min^{-1}$ ($d_{32}$: 0.53 $\mu$m)]. Tween 20을 첨가할 경우 MC 유화액의 크리밍 안정도는 Tween 20을 첨가하지 않은 경우보다 낮았고(0.2 wt% Tween 20 첨가 제외), 낮은 첨가 농도에서 가장 낮은 안정도를 보였으며, 농도가 증가할수록 안정도는 회복되는 것으로 관찰되었다[$V_m$: 0.598 $\mu$m $min^{-1}$(0.01 wt%)${\rightarrow}V_m$: 0.389 $\mu$m $min^{-1}$(0.2wt%)]. MC 유화액 연속상의 점도를 측정한 결과 이러한 크리밍 안정도 변화는 연속상의 점도 변화 경향과 잘 일치하고 있었다(Stokes 법칙에 잘 따름). 따라서 Tween 20을 함유하는 유화액의 크리밍에 대한 안정도는 물/기름 계면에서 일어나는 MC/Tween 20 간 경쟁흡착에 의하여 수용액 상으로 이탈된 MC 농도에 의존되고 있음을 알 수 있었다. 유화 불안정화 시간($t_d$)으로 평가한 orthokinetic stability의 경우 Tween 20 첨가에 의하여 MC 유화액의 유화 안정도는 낮아 졌으며, 유화제 첨가 농도의 증가와 더불어 더욱 낮아지는 경향을 보였다[$t_d$: 160 min(0.03 wt%)${\rightarrow}t_d$: 100 min(0.2wt%)]. Tween 20은 계면 흡착 MC를 수용액 상으로 이탈시키므로 Tween 20을 함유한 MC 유화액의 orthokinetic stability 특성은 MC load에 지수 함수적으로 의존됨을 확인할 수 있었다. 결론적으로 MC 유화액에 Tween 20을 첨가할 경우 유화안정도에 영향을 미칠 수 있으며 그 정도는 첨가한 Tween 20의 농도에 의존되는 특성을 보였다.

Winsor계에서 제조된 O/W 에멀젼의 안정성 연구-1 (Stability of O/W Emulsions Prepared from Winsor Systems-1)

  • 조완구
    • 공업화학
    • /
    • 제9권2호
    • /
    • pp.261-267
    • /
    • 1998
  • 본 논문에서는 Winsor systems으로부터 제조된 AOT 에멀젼의 안정성을 염화나트륨의 농도 변화에 따라 관찰하였다. 에멀젼은 헵탄+염화나트륨 수용액+AOT고 구성하였다. 염화나트륨 농도의 증가에 따라 안정성은 증가를 보이다가 일정 농도 이후에는 안정성이 급격히 감소하였다. 저 농도 염화나트륨에서는 크리밍 현상이 주로 유상과 수상의 비중 차이에 의한 단일 입자의 상승에 기인하였다. 시간 경과에 따른 크리밍 현상의 모델를 개발하여 적용한 결과 저 농도의 염화나트륨에서는 실험 결과와 잘 일치하였으나 고 농도의 염화나트륨에서는 에멀젼 입자가 작아지면서 (입자의 부력이 감소) 입자 사이의 반발력이 감소하고 오히려 인력이 증가하면서 안정성이 감소하였다.

  • PDF

Effects of Beef Fat Replacement with Gelled Emulsion Prepared with Olive Oil on Quality Parameters of Chicken Patties

  • Meltem, Serdaroglu;Berker, Nacak;Merve, Karabiylkoglu
    • 한국축산식품학회지
    • /
    • 제37권3호
    • /
    • pp.376-384
    • /
    • 2017
  • The objective of this study was to investigate the effect of using gelled emulsion (olive oil 46%, inulin 9%, gelatin 3%) as fat replacer on some quality parameters of chicken patties. For this purpose GE, prepared with olive oil, gelatin and inulin was replaced with beef fat at a level of 0%, 25%, 50%, 100% (C, G25, G50, G100). In this study syneresis, thermal stability, centrifuge and creaming stability of gelled emulsion were analyzed. Chemical composition, technological paramerers (cooking yield, water holding capacity, diameter reduction, fat and moisture retention) and textural and sensory properites were evaluated in comparision to control patties. High thermal stability was recorded in GE (93%), also creaming stability results showed that GE protected its stability without any turbidity and separation of the layer. The complete replacement of beef fat with GE showed detrimental effect on all investigated cooking characteristics except fat retention. Replacement of beef fat with GE at a level of 50% resulted similar cooking characteristics with C samples. Color parameters of samples were affected by GE addition, higher CIE $b^*$ values observed with respect to GE concentration. The presence of GE significantly affected textural behaviors of samples (p<0.05). Our results showed that GE prepared with inulin and olive oil is a viable fat replacer for the manufacture of chicken patty.

초임계 $CO_2$ 유체 추출법으로 얻은 탈지 유채박 중 표면활성 물질의 유화 성질 연구 (Emulsifying Properties of Surface-Active Substances from Defatted Rapeseed Cake by Supercritical Carbon Dioxide Extraction)

  • 김정원;정용선;이의석;길나영;김산성;김현효;김태영;이영화;장영석;이기택;홍순택
    • 한국응용과학기술학회지
    • /
    • 제30권4호
    • /
    • pp.635-648
    • /
    • 2013
  • This study was carried out to investigate the emulsifying properties of surface-active substances from defatted rapeseed cake by supercritical $CO_2$ extraction. Based on the interfacial tension data, a supercritical fluid extract (SFE) with the lowest value of 14.16 mN/m was chosen for evaluation which was obtained from No. 2 extraction condition (150 bar, $65^{\circ}C$, 250 g). For emulsions with SFE, some physicochemical properties (i.e., fat globule size, creaming stability, zeta potential etc) were investigated according to changes in SFE concentration, pH, and NaCl addition in an emulsion. It was found that fat globule size was decreased with increasing SFE concentration in emulsion, with showing a critical value at 0.5 wt%, thereby resulting in less susceptibility to creaming behavior. The SFE emulsion also showed instability at acidic conditions (pH<7.0) as well as by NaCl addition. This was coincided with zeta potential data of emulsion. In addition, SSL (sodium stearoyl lactylate) found to be suitable as a co-surfactant, as it helped considerably in decreasing fat globule size in emulsions and its optimum concentration to be over 0.03 wt%, based on 0.1 wt% SFE in emulsion.

HLB 변화와 전상유화에 의해 형성된 에멀젼의 안정성 (The Stability of Emulsions Formed by Phase Inversion with Variation of HLB of Surfactant)

  • 박수남;양희정;김재현;조완구
    • 한국응용과학기술학회지
    • /
    • 제26권2호
    • /
    • pp.117-123
    • /
    • 2009
  • Caprylic/Capric triglyceride-in-water emulsions stabilized by Nikkol HCO-60 and HCO-10 were prepared using emulsion inversion point method at different HLB values. Emulsions with various droplet sizes were formed, and emulsion inversion point was detected by electrical conductivity. The change in emulsion droplet sizes and long term stability were monitored using laser scattering method and visual method. The droplet sizes and stability of emulsions were affected by HLB of surfactant. At emulsion inversion point, the water volume fraction increased as the HLB of surfactants decreased. According to our analysis, this resulted from a tendency of forming the W/O (water-in-oil) emulsion as the HLB of surfactants was decreased. The emulsion inversion point was clearly detected by the microscope and the electric conductivity meter. Nanometer-sized emulsion was obtained at the optimum HLB by using emulsion inversion point method. The main pattern of instability of emulsions in HLB 12 and 13 systems was Ostwald ripening. However, The patterns of instability of emulsions below 11 of HLB systems were Ostwald ripening and coalescence. All emulsions produced with surfactants in the range of HLB 8-13, creaming caused by density difference between water phase and oil phase.