• Journal of Astronomy and Space Sciences
• /
• 제23권3호
• /
• pp.199-208
• /
• 2006

The terrestrial impact cratering record recently has been examined in the time domain by Chang & Moon (2005). It was found that the ${\sim}26$ Myr periodicity in the impact cratering rate exists over the last ${\sim}250$ Myrs. Such a periodicity can be found regardless of the lower limit of the diameter up to D ${\sim}35km$. It immediately called pros and cons. The aim of this paper is two-fold: (1) to test if reported periodicities can be obtained with an independent method, (2) to see, as attempted earlier, if the phase is modulated. To achieve these goals we employ the time/frequency analysis and for the first time apply this method to the terrestrial impact cratering records. We have confirmed that without exceptions noticeable peaks appear around ${\sim}25$ Myr, corresponding to a frequency of ${\sim}0.04(Myr)^{-1}$. We also find periodicities in the data base including small impact craters, which are longer. Though the time/frequency analysis allows us to observe directly phase variations, we cannot find any indications of such changes. Instead, modes display slow variations of power in time. The time/frequency analysis shows a nonstationary behavior of the modes. The power can grow from just above the noise level and then decrease back to its initial level in a time of order of 10 Myrs.

• Journal of Astronomy and Space Sciences
• /
• 제25권2호
• /
• pp.71-76
• /
• 2008

Study of terrestrial impact craters is important not only in the field of the solar system formation and evolution but also of the Galactic astronomy. The terrestrial impact cratering record recently has been examined, providing short- and intermediate-term periodicities, such as, ${\sim}26$ Myrs, ${\sim}37$ Myrs. The existence of such a periodicity has an implication in the Galactic dynamics, since the terrestrial impact cratering is usually interpreted as a result of the environmental variation during solar orbiting in the Galactic plane. The aim of this paper is to search for a long-term periodicity with a novel method since no attempt has been made so far in searching a long-term periodicity in this research field in spite of its great importance. We apply the cepstrum analysis method to the terrestrial impact cratering record for the first time. As a result of the analysis we have found noticeable peaks in the Fourier power spectrum appear ing at periods of ${\sim}300$ Myrs and ${\sim}100$ Myrs, which seem in a simple resonance with the revolution period of the Sun around the Galactic center. Finally we briefly discuss its implications and suggest theoretical study be pursued to explain such a long-term periodicity.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.269-282
• /
• 2003

Grieve(1991), Moon et al.(2001), Earth Impact Database(2002; DB02) 등 세 가지 충돌구 DB를 이용해서 미행성 지구충돌 사건의 주기성 여부를 조사했다. 특히 DB02는 과거 사용됐던 데이터베이스들에 비해서 연령 측정오차가 크게 향상되었으며, 이를 이용한 주기분석 발표는 이번이 처음이다. DB02(나이 $t{\leq}250Myr$ 및 $t{\leq}150Myr$, 나이오차 ${\Delta}t{\leq}{\pm}10Myr$)에 대 한 Fourier 분석 결과, $D{\geq}5km$와 $D{\geq}20km$인 표본의 경우, 주기성이 검출되지 않았다. 그러나 $D{\geq}30km$인 표본인 경우 16.1Myr와 34.7Myr에서 두 개의 피크가 나타났고, $D{\geq}45km$인 표본은 16.1Myr부근에서 강한 파워를 보였다. 이로부터 우리는 $d{\geq}1.5km$인 천체의 주기적인 지구 충돌 가능성을 고려할 수 있으며, 충돌구 나이의 정밀도는 물론 t와 D의 범위, 그리고 데이터베이스의 선택이 미행성의 지구충돌의 역사를 재구성하는데 중요한 변수로 작용한다는 사실을 확인했다.

• Journal of the Optical Society of Korea
• /
• 제7권3호
• /
• pp.150-155
• /
• 2003

Femtosecond laser ablation mechanism was systematically investigated on sodalime glass in ambient conditions. The ablation crater diameter was measured for varying numbers of laser pulses as for varying well as the laser fluence. The analysis of the results with a one dimensional spatial Gaussian fluence distribution reveals that the inherent ablation mechanism has been altered from a multi-photon process to a single photon excitation due to defect sites that have been accumulated by successive laser pulses. Furthermore, the transition between the two regimes was found to be a function of both the laser fluence and the number of laser shots.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.79-93
• /
• 2009

In the present paper, a methodology has been presented for the reliability assessment of concrete barriers that lie at a certain depth in the soil, and a missile (a rigid projectile) impacts the top of the soil cover normally, and subsequently after penetrating the soil cover completely it hits the barrier with certain striking velocity. For this purpose, using expressions available in the literature, striking velocity of missile at any depth of soil has been derived and then expressions for the depths of penetration in crater and tunnel region of concrete barrier have been deduced. These depths of penetration have been employed for the derivation of limit state functions. Using the derived limit state functions reliability assessment of underground concrete barrier has then been carried out through First Order Reliability Method (FORM). To study the influence of various random variables on barrier reliability, sensitivity analysis has also been carried out. In addition, a number of parametric studies is conducted to obtain the results of practical interest.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.327-333
• /
• 2003

터널 및 지하공동 설계에 이용된 23개 지역의 578개의 시추공발파 진동 data와 시공 중인 일반터널의 4개 지역으로부터 221개 진동 data를 이용, 시추공발파의 진동전달 특성을 분석하였다. 시추공발파와 일반터널발파의 진동속도 감쇠 경향을 비교 분석한 결과 시추공발파의 입지상수들이 크게 나타났다. 환산거리가 클 때 최대 허용장약량은 시추공발파의 식으로 계산한 것이 더 적었다. 주진동수에 대한 주파수 분석결과 시추공발파는 30∼60Hz, 일반터널발파는 60∼90Hz로 나타났다. 이러한 결과로부터 시추공발파 자료를 터널발파 설계에 직접 사용하는데 다소의 문제가 있는 것으로 판단되며 보다 정확한 설계를 위하여 통계적 처리가 불가피할 것으로 보인다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.657-658
• /
• 2006

Although there are many numerical models to simulate fs laser ablation of metals, no model can analyze the ablation phenomena over a wide range of fluence. In this work, a numerical code for simulating the fs laser ablation phenomena of metals has been developed. The two temperature model is employed to predict the ablation rate and the crater shape of metals using phase explosion mechanism in the relatively high fluence regime. Also, the ultrashort thermoelastic model is used for the low fluence regime to account for spallation of the sample by high strain rate. It has been demonstrated that the thermoelastic stress generated within the sample can exceed the yield stress of the material even near the threshold fluence. Numerical computation results are compared with the experiment for Cu and Ni and show good agreement. Discussions are made on the hydrodynamic model considering phase change and hydrodynamic flow.

• 한국정밀공학회지
• /
• 제8권3호
• /
• pp.44-54
• /
• 1991

A Study was made on falnk wear in carbide tools in turning SUS304 steel. When an austenitic stainless steel (SUS304 steel) is cut with the tool, saw-toothed chip are produced. It is found that machining SUS304 steel would make a tool worn fast. For increasing productivity, tool wear has to be predicted and controlled. An amended cutting geometry consisting of a negative rake angle ($-6^{\circ}$ ) and a high clearance angle ($-17^{\circ}$ ) is proposed for decreasing carbide tool wear (flank) in the machining of SUS304 steel. The amended cutting geometry is found to make the flank wear lower than a general cutting geometry (rake angle $6^{\circ}$ , clearance angle $5^{\circ}$). The effects of the three cutting variables (cutting speed, feed, tool radius) on the flank wear analyzed by fiting a simple first-order model containing interaction terms to each flank wear parameter by means of regression analysis and the predicted from first-order regression analysis model equation of flank wear.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.111-111
• /
• 2016

Two step PEO ceramic coatings were formed on AZ91 magnesium alloy in $ZrO_2$ nanoparticles and $K_2ZrF_6$ based colloidal electrolyte solution for various voltages. Surface and layers tructure of the coatings was analyzed using SEM (ScanningElectronMicroscope). Structure analysis revealed that surface of the coating was transferred from individual pancake or craters-based structure to cluster-based structure with increasing the voltage of the secondary step process. Further, it was confirmed that the cluster zone was richin Zr-based complexes and formed due to high intensives parks. Increase in the Zr contents as discovered from the EDS analysis confirmed the rise in amorphous form of the Zr-based species, which justified the results of XRD where no increase in the intensity of Zr-based species was observed with increase in voltage. Potentiodynamic polarizariotion and impedance spectroscopy techniques were used to evaluate the corrosion performance of the coatings. The highest corrosion resistance was found for coatings prepared at 240V. The same specimen was found having highest and uniform vickers hardness ~1070.5 HV. The superior mechanical and electrochemical properties of the said coating can be attributed to the defect-less microstructure and the optimal role of $ZrO_2$ nanoparticles in the secondary PEO process at 240V.

• 대한원격탐사학회지
• /
• 제29권5호
• /
• pp.443-459
• /
• 2013

자바 섭입대 위에 존재하는 인도네시아 메라피 화산은 1~5년의 주기를 가지는 화산활동이 활발한 성층화산이다. 대체적으로 화산폭발지수가 1-3정도의 규모로 나타나는데 비해 최근 2010년 분화는 화산폭발지수가 4까지 올라가 386명을 사망자를 유발했다. 본 연구에서는 40년간 지구를 관측해온 Landsat 영상을 이용하여 18년 동안 메라피 화산의 지표변화를 관측하였다. 연구를 위해 1994년 7월 6일부터 2012년 9월 1일까지 총 55장의 Landsat-5,7 영상을 수집하였으며, 밴드조합영상을 통해 화산쇄설류의 흐름이 시간에 따라 이동함을 확인하였다. 화산쇄설류가 덮고 있는 지역을 추출하기 위해서, COST model을 이용한 대기보정 후 감독분류를 수행하였으며, 그 결과 CVP 보고서에 기재된 화산쇄설류의 분화 방향과 추출된 화산쇄설류 영역의 변화가 거의 일치했다. NASA에서 제공하는 Landsat-5,7 위성의 열적외선 밴드를 이용한 온도 추출 기법을 적용하여 분화구 지역의 평균 지표온도를 산출한 결과, 분화 전 지표 온도가 급격히 상승하고, 분화 후 온도가 하강하는 양상을 반복적으로 나타냈다. 비록 기상조건에 따른 영상획득에 제약이 있지만, 장기간 발생된 메라피 화산의 지표변화를 확인하는데 있어서 Landsat 위성 영상이 매우 유용한 도구임을 확인했다.