• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.139-147
• /
• 2013

PURPOSES : This study aims to draw differences between primary and secondary crashes by comparing crash characteristics and to identify the unique characteristics of secondary crashes for making better effective countermeasures to reduce secondary crashes. METHODS : The characteristics of secondary crashes were compared to those of primary crashes through a two sample proportional test (z-test). RESULTS : The results showed that vehicle-to-vehicle crashes and vehicle-to-person crashes are dominant crash types in secondary crashes. Compared to primary crashes, secondary crashes were likely to occur during nighttime. With respect to season and weather, the proportion of secondary crashes occurred during winter and in snowy weather is relatively higher than that of primary crashes. The main causes of primary crashes were found to be drowsiness, speeding, and exaggerated steering control, whereas main factors affecting the occurrence of secondary crashes were negligence of keeping eyes forward and no keeping a safe distance as expected. CONCLUSIONS : The characteristics affecting the occurrence of secondary crashes are different from those of primary crashes, indicating that proper countermeasures should be established to prevent the occurrence of secondary crashes on highways.

• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.179-194
• /
• 2018

Reliable and accurate method of computationally aided design processes of advanced thin walled structures in automotive industries are much essential for the efficient usage of smart materials, that possess higher energy absorption in dynamic compression loading. In this paper, most versatile components i.e., thin walled crash tubes with different geometrical profiles are introduced in view of mitigating the impact of varying cross section in crash behavior and energy absorption characteristics. Apart from the geometrical parameters such as length, diameter and thickness, the non-dimensionalized parameters of average forces which control the plastic bending moment for varying thickness has explored in view of quantifying its impact on the crashworthiness of the structure. The explicit finite element code ABAQUS is utilized to conduct the numerical studies to examine the effect of parametric modifications in crash behavior and energy absorption. Also the simulation results are experimentally validated. It is evident that the circular cross-sectional tubes are preferable as high collision impact shock absorbers due to their ability in withstanding axial and oblique impact loads effectively. Furthermore, the specific energy absorption (SEA), crash force efficiency (CFE), plastic bending moment, peak force responses and its impact for optimally tailoring a design to cater the crashworthiness requirements are investigated. The primary outcome of the study is to provide sufficient information on circular tubes for the use of energy absorbers where impact oblique loading is expected.

• Structural Engineering and Mechanics
• /
• v.70 no.2
• /
• pp.153-168
• /
• 2019

In this paper, energy absorption characteristics of circular windowed tubes with different section shapes (circular, ellipse, square, hexagon, polygon and pentagon) are investigated numerically and experimentally. The tube possesses the same material, thickness, height, volume and average cross sectional area which are subjected under axial and oblique quasi-static loading conditions. Numerical model was constructed with FE code ABAQUS/Explicit, the obtained outcome of simulation is in good matching with the experimental data. The energy absorbed, specific energy absorption, crash force efficiency, peak and mean loads along with the collapse modes with their initiation point of simple and windowed tubes were evaluated. The technique for order of preference by similarity ideal solution (TOPSIS) approach was employed for assessing their overall crushing performances. The obtained results confirm that efficacy of crash force indicators have improved by introducing windows and tubes with pentagonal and circular windows achieves the maximum ranking about 0.528 and 0.517, it clearly reveals the above are best window shapes.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.72-81
• /
• 2011

In the present day, the needs of new steel for lightweight car-body have been increased in the automotive industry. however, the resistance spot welding is difficult to apply to the new steel because of the narrow weld current range and defects. As the solutions to these problems, adhesive bonding process is proposed. Adhesive bonding which reduce noise and vibration can be applied to joining the new steel. In this study, crash tests of b-pillar applied the resistance spot welding, structural adhesive bonding, the mixture of the structural adhesives and resistance spot welding were performed. And FEM crash model for b-pillar applied the structural adhesive bonding was developed. The results of experiment and analysis on b-pillar crash test were compared to verify the validity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.135-141
• /
• 2005

Currently many safety assessment tests are conducted by crashing a vehicle against a rigid or deformable barrier. It is quite rational to evaluate crash performance of a vehicle in a barrier test in terms of vehicle stiffness and strength. However, there has been a lot of debate on whether barrier testing is a duplicate of real world crash collisions. One of the issues is car to car compatability. There are two essential subjects in compatability. One is partner-protection when crashing into another vehicle and the other is self-protection when struck by another vehicle. When considering a car to car frontal crash between a mini car and a large heavy car, it is necessary to evaluate human body stiffness of each vehicle. In this study, in order to evaluate the compatability of cars in car-to-car crashes, four tests were conducted. Test speed of each car is 48.3km/h, and the overlap of the mini and large car is $40\%$, and the overlap of the small cars is $100\%$. In all tests, only a drive dummy is used. The test results of the car to car crash test show that vehicle safety standard of mini car is not satisfied compared with large heavy car and HIC value of mini car is higher than large car. In this case observed that the relatively lower stiffness and weight of the mini car resulted in absorbing a large share of the total input energy of the system when crashed into the large heavy car.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.167-175
• /
• 2020

The Two-fluid Model, proposed by Herman and Prigogine in 1979, is a macroscopic model for describing network operability in urban networks. Since the Two-fluid Model parameters change according to the traffic flow characteristics, it is necessary to identify the cause of flow change when analyzing the operability using the parameters. This study compared the crash risk according to rainfall using the Two-fluid Model parameters, and explained that the driving behavior affects the operability of the urban network. The results of the parameters estimation showed poor network operation under rainfall condition. The factors of drivers' crash risk perception model were calculated, and driving behavior was analyzed due to crash risk according to rainfall. In both the morning and evening, drivers tended to slow down their speeds to reduce the crash risk, because the risk on rainy days could be high when the speed was the same as on a sunny days. However, the crash risk was still higher on rainy days than sunny. In the future, it is necessary to analyze the relationship between the network operation and the crash risk in various networks and to improve both.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.153-164
• /
• 2009

This Paper presents the severity analysis result of the year 2006 national pedestrian crashes using the data base of 37,589 records prepared for the National Police Bureau. A set of attributing factors considered to affect pedestrian crash patterns were selected, and their contributing effects were investigated by applying the Ordered Logit Model. This model was selected because this model has been able to afford satisfactory results when the dependent variable involved ordered severity levels; fatal, injury, and property- damage-only in this investigation. The investigation has unveiled the followings; First, the pedestrian crash patterns were dependent upon human -drivel and pedestrian- characteristics including gender, age, and drinking conditions. Second, other contributing factors included vehicle, roadway geometric, weather, and hour of day characteristics. Third, seasonal effect was not contributive to crash patterns. Finally, the application of the Ordered Logit Model facilitated the ordered severity level analysis of the pedestrian crash data. This paper concludes that conventional wisdom on the pedestrian crash characteristics is largely truthful. However, this conclusion is limited only to the data used in this analysis, and further research is required for its generalization.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.43-51
• /
• 2011

Since a variety of factors are associated with crash occurrence, the analysis of causes of crash is a hard task for traffic researchers and engineers. Among contributing factors leading to crash, the characteristics of driver is of keen interest. This study attempted to identify factors affecting the severity of pedestrian in the collision between pedestrian and vehicle. In particular, our analyses were focused on the novice driver. A binary logistic regression technique was adopted for the analyses. The results showed that driver's age, crash location, and the frequency of violations were dominant factors for the severity. Findings are expected to be useful information for deffective policy- and education-based countermeasures.

• Korean Journal of Metals and Materials
• /
• v.50 no.12
• /
• pp.873-882
• /
• 2012

Dual Phase (DP) steel which has a soft ferrite phase and a hard martensite phase reveals both high strength and high ductility and has received increased attention for use in automotive applications. To conduct structural analysis to verify vehicle safety, highly credible experimental results are required. In this study, tensile tests were performed in a strain rate range from $10^{-4}/s$ to 300/s for Sink Roll-Less (SRL) hot-dip metal coated sheets. Collision properties were estimated through simulation by LS-DYNA using the stress-strain curve obtained from the tensile test. The simulation results were compared with the actual crash test results to confirm the credibility of the simulation. In addition, a tensile test and a crash test with 2% prestrain and a baking (PB) specimen were evaluated identically because automotive steel is used after forming and painting. The mechanical behaviors were improved with an increasing strain rate regardless of the PB treatment. Thus, plastic deformation with an appropriate strain rate is expected to result in better formability and crash characteristics than plastic deformation with a static strain rate. The ultimate tensile strength (UTS) and absorbed energy up to 10% strain were improved even though the total elongation decreased after PB treatment, The results of the experimental crash test and computer simulation were slightly different but generally, a similar propensity was seen.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.21-24
• /
• 2007

This paper deals with introduction of testing equipments for the evaluation of dynamic tensile characteristics of auto-body steel sheets and the crashworthiness of auto-body members. The servo-hydraulic high speed material testing machine was developed for tensile tests at the intermediate strain rate to obtain the tensile material properties at the strain rate under 500/sec. The split Hopkinson bar apparatus using the elastic wave was developed for dynamic material characteristics at the high strain rate ranged from 1,000 to 10,000/sec. The servo-hydraulic high speed crash testing machine is the equipment for the evaluation of the collapse load and crashworthiness of auto-body members. High speed carrying truck crashes to specimen with the maximum velocity of 17 m/sec.